Xenon Body Kits

Quality Begins with Great Design

Xenon's company philosophy is "Quality starts with great design". It's easy to see proof of this when you see Xenon body styling parts installed on a car or truck. Whatever the part may be, an air dam, a spoiler, it's skillfully integrated into the vehicle's design to enhance the overall appearance. Furthermore, when you study Xenon parts closely you can see styling flairs and details in every part that you just don't see in some competitors' products.

Featured Products

Xenon body styling products are manufactured in the USA by American Fabrication Corporation (AFC). The company was founded in 1973 and has been manufacturing polyurethane parts since 1980. AFC operates their tooling, manufacturing and administrative services from their 37,500 sq. ft. facility in Southern California, including a complete pattern and mold department.

Xenon GalleryXenon VideoXenon About

Because Xenon places such importance on design, they have the best designers in the field create visually exciting products that improve the factory design. Xenon stylists design each part for the specific vehicle, to make sure the part enhances and accentuates the vehicle's design. They believe that body styling parts should blend with and complement the body's natural contours.


Urethane parts can have endless design features molded into the part for strength, fit and styling, and the thickness of the part can be maintained during the manufacturing process. To form a fender flare from ABS, a sheet of plastic is formed over a mold, but the plastic thins when it's stretched, in some places to as little as a 1/16th of an inch. In contrast, the same flare molded in urethane can have a wall thickness of 1/8th inch maintained throughout the flare.

  • Xenon Cars
  • Xenon Cars
  • Xenon Cars
  • Xenon Cars
  • Xenon Cars
  • Xenon Cars
  • Xenon Cars
  • Xenon Cars
  • Xenon Cars
  • Xenon Cars
  • Xenon Cars
  • Xenon Cars

Although it has proven to be advantageous for styling, the main benefit of using polyurethane is its toughness and durability. Unlike fiberglass and even ABS plastic, urethane can take an impact that severely distorts the part and have the part return to its original shape. And when painted with a flexible paint, urethane can withstand moderate flexing without damaging the paint.

Of course, great design doesn't mean a thing if the part doesn't fit properly on your car or truck. To make sure every Xenon part fits as the designer intended, Xenon has their own tooling department to ensure the quality of the tooling, which in turn ensures the quality of the part. For example, Xenon Sport Flares are designed to fit directly to the side of the vehicle, without the need for edge trim, which is used by other manufacturers. For cutting edge style and design, maximum toughness and durability, and perfect fit and finish, you need Xenon body styling parts.

Xenon Reviews
Average rating:4.54.6 - 56 reviews
5(4.8)
APPEARANCE10
EASE OF INSTALLATION8
PRICE/VALUE10
QUALITY10
1991 Chevy Suburban
| Posted by | (Surrey, BC)

Very good quality product. Nice finish and very durable. Looks like it will withstand rocks and other items being flung onto it.

Was this review helpful for you? YesNo
Share this review:
4.5(4.5)
APPEARANCE10
EASE OF INSTALLATION6
PRICE/VALUE10
QUALITY10
1986 Nissan 300ZX
| Posted by | (Portland, OR)

Came in a nice big box and fits good. It's pretty thick and installed as planned. I'm looking to take off 2 seconds a lap.

Was this review helpful for you? YesNo
Share this review:
4.5(4.3)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE6
QUALITY8
2013 Dodge Charger
| Posted by | (Rhinelander, WI)

Just received my spoiler and haven't installed it yet. But the fit and finish is great. Had a front bumper before. It was also great!

Was this review helpful for you? YesNo
Share this review:
4.5(4.3)
APPEARANCE8
EASE OF INSTALLATION8
PRICE/VALUE10
QUALITY8
2013 Nissan 370Z
| Posted by | (Midlothian, VA)

All of the Xenon pieces I have ordered fit right. I would recommend purchasing them.

Was this review helpful for you? YesNo
Share this review:
4.5(4.5)
APPEARANCE10
EASE OF INSTALLATION8
PRICE/VALUE10
QUALITY8
2013 Chevy Camaro
| Posted by | (Indian Trail, NC)

Had these painted professionally, so I can not report on any problems with that part of the process. The set that I received was built dated one year apart: the passenger side was manufactured one year before the driver's side. The driver's side was contoured to fit better than the passenger side. If you buy these, follow the manufacturer's instructions and carefully test the fit of both sides before you paint. I did a fair amount of handwork on the tape channels in order for them to fit tightly the body when installed. If you're not concerned with how tightly and evenly they fit, you can disregard this step. Instructions state warming the car and the scoops before installation. I did this on a 95 degree day, and this made a huge difference in allowing the passenger side to fit correctly.

1 people found this review helpful.
Was this review helpful for you? YesNo
Share this review:
4.5(4.5)
APPEARANCE10
EASE OF INSTALLATION8
PRICE/VALUE8
QUALITY10
2007 Chrysler 300
| Posted by | (Bowie, MD)

Very good product. Made very well and looks great.

Was this review helpful for you? YesNo
Share this review:
4.5(4.5)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE8
QUALITY8
2004 Ford Ranger
| Posted by | (Methuen, MA)

Fit nice when I slapped it on to get an idea of appearance. Xenon logo is on top in middle about two inches long and an inch tall that was not in description. Seems real durable.

2 people found this review helpful.
Was this review helpful for you? YesNo
Share this review:
4.5(4.5)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE8
QUALITY8
2005 Ford Ranger
| Posted by | (Methuen, MA)

Had the roll pan installed by my body shop. Looks good and fits nice. Good quality. Very satisfied with product.

1 people found this review helpful.
Was this review helpful for you? YesNo
Share this review:
4(4)
APPEARANCE10
EASE OF INSTALLATION8
PRICE/VALUE6
QUALITY8
2013 Dodge Charger
| Posted by | (El Paso, TX)

The hoods made a big difference in how the car looks now. They are well made too.

Was this review helpful for you? YesNo
Share this review:
5(5)
APPEARANCE10
EASE OF INSTALLATION10
PRICE/VALUE10
QUALITY10
2002 Chevy Camaro
| Posted by | (New Castle, DE)

Great product. Is as said to be in description - simple to install, fits great, and shipped on time. Very nice company to do business with.

2 people found this review helpful.
Was this review helpful for you? YesNo
Share this review:
Show Next 10 View All Xenon Reviews