Scion iQ Accessories & Parts

Agile and toylike, the Scion iQ is a three-door hatchback subcompact introduced at the Geneva Auto Show in 2008. Though the European sales began in 2009, the supermini reached the North American shores only in 2011. With its fuel efficient iQ, the brand targets urban-dwellers and aims to rival such vehicles as the Ford Fiesta, Fiat 500, Mini Cooper, Smart ForTwo, and Mazda 2. Being only a bit longer than 10 feet, the iQ is more than a foot longer than the ForTwo, yet 20 inches shorter than the Fiat 500. To keep the length down, Toyota had to push the rims and suspension a bit out of the corners, and relocate the 8.5 gallon gas tank under the drivers' seat. The supermini is termed as a 3+1 seater. It was designed so that the front passenger seat could be slid far forward to allow an adult passenger occupy the rear seat. As for the +1 seat behind the driver, it can accommodate a child but definitely not an adult. When the second row passenger seat is in use, there is only 3.5 cubic feet of cargo space, yet when it is folded the storage space reaches 16.7 cubic feet. Other Scion iQ parts where you can store your belongings are four 25-ounce door containers, as well as one cupholder in the center and two rear cupholders in the rear console.

The front-wheel-drive Scion iQ is powered by a standard 1.3 L, 4-cylinder engine mated to a continuously variable transmission. The engine is capable of 94 hp and 89 lb ft of torque. Its suspension is a mix of torsion-beam axle in the back and MacPherson struts in front. Rated as an Ultra Low Emission Vehicle (ULEV-II), the iQ returns 36 mpg in the city and 37 mpg on the highway. This kind of power and efficiency is adequate for the around-town commuting, and at the same time, it makes the car feel solid enough on the highway. The safety features and parts of the Scion iQ are stability and traction control, antilock brakes (front disc and rear drums), and eleven air bags, including separate airbags for the head and knees of both the driver and the front passenger, side-curtain airbags, seat-cushion airbags, and even an airbag for the rear window.

There are no official factory options offered for the Scion iQ, yet Toyota provides an extensive catalog of dealer-installed equipment. The list of optional Scion iQ parts and accessories includes stiffer antiroll bars, shorter springs, body side molding, fog lamps, rear spoiler, and mud guards. The interior options are door sills and interior light kit. As for the standard Scion iQ parts, the subcompact comes with a 160-watt, four-speaker Pioneer audio system with an AM/FM radio, CD player, USB port, HD radio, as well as a built-in hands-free phone connection. The center console hosts the Scion Driver Monitor, which displays the outside temperature, an average mpg and an ECO-drive indicator that helps maximize the vehicle's efficiency. The iQ is also equipped with the standard 16'' rims, full power accessories, air-conditioning, and a leather-wrapped steering wheel with audio controls.

Essentially designed to be a premium minicar, the Scion iQ might get us thinking a bit different about 'the bigger – the better.' With its world-class materials, improved noise isolation, and a sophisticated feel, this subcompact offers much more than the rivals. Being in fact the world's smallest four-seater, the Scion iQ uses a lot of innovative solutions to overcome the inconveniences associated with the superminis. Modern, efficient, and funky, this car is a real urban miracle and an ultimate expression of the personal mobility. Of course, it's efficient on fuel. And yes, it has enough zip in the performance to make an impression on the highway. The iQ proves that good things come in small packages!

The Scion iQ Accessories and Parts are always in the spotlight at CARiD.com. We offer only the premium quality when it comes to whatever you need, be it style, protection, or comfort. All of our Scion iQ accessories and parts come from the top manufacturers who know your model best. That means a precise OEM fit along with the professional durability - guaranteed. Don't turn your back on the chance to give your car a more personal edge. Take advantage of it. Our lineup of the Scion iQ accessories will help.

Whatever you expect from your Scion iQ, a bold look, mind-boggling performance, greater ride comfort, or safer driving, CARiD goes the extra mile to meet all your needs. Our extensive range of premium accessories and parts covers all the bases, whether you want your vehicle to be more powerful, smarter, fun to drive, or just need to restore it to original condition. We know how to throw a classy appeal into your Scion iQ and keep it providing the best performance, so trust us and get the greatest bang for the buck!

Featured Products

Guides & Articles

  • Rear spoilers are one of the flashiest yet cost-effective exterior additions you can make to your ride. The right spoiler will transform a plain-Jane family car into a sports sedan, and upgrade a sporty car into a one-of-a-kind race machine.
  • A simple way to answer this question would be with a "yes". However, the science of properly managing airflow to create beneficial automotive aerodynamics is, quite literally, more complicated than meets the eye. The word "aerodynamics" brings to mind visions of a vehicle in a wind tunnel with a smoke wand illustrating how smoothly air flows over it. But true automobile aerodynamics involves a detailed study of how the motion of air interacts with all areas of an automobile. One term that gets the most attention is "coefficient of drag" (Cd), which is an overall measurement of a shape's resistance to airflow.
  • When you've finally decided on the right rear spoiler or wing for your vehicle, it can't arrive quickly enough. Then, you want it to be ready for installation as soon as possible so you can begin enjoying the benefits of it. Because we understand this, we offer the option of ordering spoilers pre-painted by our manufacturers before shipping. Based on customer feedback and experiences relayed to us, we strongly recommend you consider choosing this option, for these very good reasons:
  • The function of a rear spoiler is to control the flow of air streaming over a vehicle and properly manage it when it reaches the rear where turbulence is most likely to form. A correctly designed spoiler will counteract the lifting forces that most cars experience when speeds get high, and it will enhance rear grip by keeping a vehicle's rear end planted firmly against the road - without causing excess drag.
  • If you're an automotive enthusiast who has visited our performance sections, it's likely that you know that reducing overall vehicle weight is an effective way to enhance your vehicle's performance, handling, and fuel economy. Naturally, there are different schools of thought on the subject of vehicle weight reduction.
  • If you're reading this, you've probably decided the factory stock appearance of your car, while attractive, is rather staid and unexciting. You know that modifying your vehicle with a body kit is what feels right when it comes to adding a personal touch and making it your own. Maybe you're considering starting out slowly by adding a rear spoiler or front air dam, or going further with side skirts and even a replacement custom hood.
  • At CARiD, we understand how deeply the appeal of side skirts, rear diffusers, aero wings, air dams, custom replacement bumper covers, and other components included in body kits runs in the blood of automotive enthusiasts. We know, because we've added them on our own vehicles to enhance performance and to create uniquely impressive visual signatures.
  • Full body kits are inspired by the look and functionality of body panel refinements made to racecars after relentless amounts of wind tunnel testing and aerodynamic adjustments on the track. Careful sculpting of body panels with addition of air dams, skirts, rear spoilers, ridges and diffusers serves to control airflow around the car - yielding a lower coefficient of drag along with greater amounts of downforce that keep a car pressed against the ground at higher speeds.
  • Maybe you've struggled to reach the roof rack of an SUV during loading and unloading of baggage. Or, if you live in a winter climate area, maybe you've also found it extremely difficult to clear snow off your van's roof because the brush in your hand wasn't long enough to reach the center. Either way, opening a vehicle door and standing precariously on the floor with both feet just inside can easily lead to loss of balance and injury. Plus, there's always a plenty of snow that spills into the passenger area - no matter how hard you try to avoid it.
  • If you carry heavy objects, sharp-edged debris, branches, lumber, rubble, and equipment in your pickup truck regularly, you know it doesn't take much for this kind of cargo to leave scratches and gouges on the painted metal surface of your bed floor and walls. Odds are you've experienced this. No matter how gingerly you place items in your bed and tie them down, the unexpected panic stop that always comes up sooner or later still manages to create chaos as things shift around. Maybe you've even felt and heard a dreaded thump behind your seat after heavier items broke free and slid forward hard - leaving a noticeable dent in your bed wall. While these are problems inherent with any metal bed floor, there is a better way to carry cargo while keeping your pickup bed looking good.
  • Whether you use your pickup for work or for recreation, carrying a lot of equipment, tools, and gear means you're potentially prepared for a range of situations. But if you can't find exactly what you need and extract it from your truck's cargo area in a timely manner, you're really not as prepared as you think. Consider the last time you couldn't find something in your truck. Maybe a search through the entire vehicle was necessary in order to be sure the item wasn't in the truck before beginning a search somewhere else. How much time did that take? And how was your stress level afterward? Or maybe, perish the thought, you had to buy a new tool to replace one you couldn't find but knew wasn't actually lost for good.
  • Seasoned professional automotive technicians often say if you're using too much physical effort during a repair, you're simply not using the right tool. This is true, and a perfect example is repairing and replacing suspension components. If you've ever done this type of work or attempted to do it, you know it can be trickier than merely loosening and tightening bolts.
  • Grille guards, bull bars, push bars, and bumper guards all offer good looks and serious protection for the front of your vehicle against hard knocks found on roads and trails everywhere. One of the best things about these protective devices is even though they'll look good and keep their high-strength integrity for a long time, it only takes a very short time to install any of them. In fact, they can bolted on relatively easily, in most cases using simple hand tools.
  • It's a dismaying feeling seeing side view mirror components damaged. Whether you know how the damage happened or not, you're faced with what might be an extensive, costly repair and the dreaded hassle of figuring out what replacement parts are necessary - or where to go for the repair. Maybe it’s only the glass that’s cracked, or perhaps the whole assembly is hanging loosely by a wire.
  • If you're looking to beef up your 4x4 to take it off-roading, chances are you've been reading about all the ways it's possible to improve a truck and get it ready for the trails. There are so many different approaches to the subject and so many differing opinions, your head may start spinning. We know starting from scratch can be confusing, especially if you're undertaking something you've never been involved with before.
  • Grille guards are sought-after accessories because they offer the rare combination of significantly boosting a truck's looks and adding valuable protection against front-end damage on job sites, off-road trails, and other tricky situations. Looking through the grille guard & bull bar section of our website, you'll see a variety of ways to protect the front of your vehicle. Because the expression "grille guard" has grown to encompass bull bars, brush guards, push bars, and bumper guards, we'll define these different styles and review the benefits each variation offers. Some of them span just the center area of your vehicle's front fascia, while others reach all the way from corner to corner.
  • There's a saying that advises out of all the paths you take in life, it's important to make sure a few of them are dirt. But while dirt can be found most anywhere you leave the pavement, far more challenging conditions and obstacles lie in wait - some seen, and some unseen. Because no two people's definitions of off-roading will be quite the same, we offer off-road front bumpers for 4x4s that are designed to avoid scrapes and damage while handling a variety of tasks OEM bumpers can't. Heavy gauge steel provides extra strength, and angled corners and edges provide extra clearance. Steep approach angles that would damage factory bumpers become no problem - wherever boulders arise from ashes.
  • Ask any serious off-roading expert what type of rear bumper is best for your 4x4, and they'll tell you the best bumper for extreme use (such as rock crawling) is one that's barely even there. What does that mean exactly? Translated, it means bumpers with edges that angle upward at corners and undersides that slope drastically upward will keep you out of trouble. Smaller size and less mass in these areas means better clearance at extreme angles - ensuring a rear bumper doesn't scrape, drag, or become damaged. Where OEM bumpers are massive and block-shaped, replacement off-road bumpers are not.
  • Since the demise of built-in running boards after World War II, auto manufacturers have been using rocker panel moldings to dress up a vehicle area that would otherwise be plain-looking and nondescript. Technically, a rocker panel is the section of a vehicle’s body below the doors and between the front and rear wheel wells. For decades, stainless steel molding strips were installed over rocker panels for styling purposes and to protect the body from stones and debris. Typically, a value-priced base model would have no rocker panel moldings at all, a higher-trim level would feature a slim molding strip just below the doors, and the most expensive version of a car would be equipped with wide rocker molding sets that extended further up onto the doors.
  • One of the more eye-catching tricks automobile manufacturers have used to differentiate higher-priced luxury versions of a car model from value-priced versions of it has been to vary the amount of chrome trim on the vehicle. Base model cars and trucks (also known as "strippers" or "entry level") have little if any chrome while luxury and top-of-the-line ones have the most chrome. In years past, plain Jane cars were simply painted in all areas instead of being chromed. In more recent decades, the low-cost replacement of choice has become black plastic. This makes base models easier than ever to spot because the eye catches hard on black plastic. Completely missing is the pleasing chrome finish on grilles, door trim, mirror assemblies, light bezels, and other areas. Base models end up looking more like fleet vehicles or work trucks than anything prestigious, especially to people who aren't automotive enthusiasts.
  • Let’s say that you’re in the market for wheel spacers. Whether it’s because you’ve added jumbo brakes, sprung for a set of custom wheels, or just want to widen your car’s stance (the VIP look), you’ve concluded that spacers are going to do the trick for you, and will solve your fitment dilemma.
  • A tonneau cover is one of the most useful accessories you can buy for your pickup truck. Tonneau covers provide protection from the weather, security, increased gas mileage, and improved styling. But with so many types and styles to choose from, which tonneau cover is right for your truck? Read on to find out.
  • If you're shopping for a new custom grille to add visual impact to the front of your car or truck, you'll see the installation methods described using such terms as "replacement", "insert", and "overlay". In this article, we’ll discuss what makes each of these methods different from each other. Whenever possible, we recommend reading a manufacturer’s installation instructions that may be available online before making a purchase. That way, you can make an informed decision regarding your ability to install the grille yourself or not. You’ll also get a sense of what tools and equipment you might need. We invite you to browse through our selection of hand tools, power tools, and other automotive tools should you find yourself in need of any of these labor-saving devices.
  • Automotive enthusiasts enjoy engaging in discussions about which car model is sleekest, which truck is brawniest, which wheels are best-looking, which car wax makes paint its shiniest, and so on. The conversations are eternal, encouraging exploration of minute details on any given subject. But ultimately, there really isn't any answer to the question of what is the best of something because it comes down to a matter of taste. Custom grilles are certainly no exception.
  • While custom grilles are among our most popular accessories, due to their relative affordability combined with the ease with which they can be installed, not everyone wants to change their vehicle’s look. Yes, that billet or mesh grille transforms the front of your car; but it’s still your car and therefore still your choice. You may, for various reasons, want to stay with the frontal factory appearance.
  • The grille on your car or truck is its most distinctive signature, and it's one of the first things people notice about your ride. A well-designed grille can make it easy for those with even a passing interest in cars to recognize the type of vehicle you drive. In our Car & Truck Custom Grilles section, we allow you to go a step further with grilles that complement, enhance, or revamp your front end a little or a lot depending on your preference. You can take this to its ultimate conclusion by creating a look for the front of your car that everyone will recognize as YOU. In this article, we'll guide you through the types and styles of grilles we offer, and we'll cover terminology you may not be familiar with such as mesh, billet, and CNC styles.
  • Seat cover design and construction have progressed a great deal in recent decades. Not so long ago, the phrase "automotive seat cover" brought to mind loose-fitting lamb's wool or sheepskin covers which slid over an entire seat like a leaf bag. This type of cover was virtually the only choice available, so the fact that they fit poorly, slid off the seats, and constantly pulled up at the corners was taken in stride because they were, after all, one-size-fits-all products. Since they were universally shaped, a single product was tasked with fitting seats in large pickup trucks as well as those in snug sports cars.
  • If you own a dog, chances are you already know the joy that comes bringing them along in your car or truck. Part-best friend and part-family, dogs appreciate every nuance that riding in a car brings – things we used to appreciate as children but have forgotten as adults. Watching the scenery, hanging a head out the window to enjoy a cool breeze, and observing other animals in passing are just some of what bring dogs a great amount of pleasure during the ride.
  • At CARiD, we understand it can be challenging to choose between styles of floor mats and floor liners, decide if you need a cargo liner, and figure out whether carpeting, vinyl, or rubber construction is best for you. In the Car & Truck Floor Mats section of our website, we offer many choices - each one with its own product description reflecting different descriptive terms and expressions used by the mat manufacturers. Because such terms can vary from manufacturer to manufacturer, we've created this glossary to help you make a more informed choice.
  • Floor mats and floor liners can do a lot to boost the luxury, utility, and sportiness of your vehicle's interior image. They are one of the first things passengers' eyes will fall on when entering your vehicle. That makes the floor mats you select worth careful consideration when it comes to factors such as feel under your feet, tolerance to spills, overall floor coverage, and colors. We've created this article to discuss how the different mat materials compare in those categories.

Scion iQ Accessories & Parts Reviews

Average rating:  5  5 - 3 reviews
4.3 of 5
Must Have If You Buy Intake
Feels like its quality material that is very durable. Easy to install in seconds. Elastic that stretches right over filter. Hard to determine if it really is water resistant b/c I haven't got any water on it that I have noticed. Good investment if you want to keep your filter clean from dirt. Would be nice if it came for free when you purchase the intake.
KPosted by Keith (Toms River, NJ) /
2013 Scion iQ
Was this review helpful for you? Yes
View More
Scion iQ Models
SECURE SHOPPING

All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.