Fabspeed® - Full Exhaust System with Split Rear Exit

Name: Fabspeed® - Full Exhaust System with Split Rear Exit
Brand: Fabspeed
SKU: 1002129586

0 reviews|Item # 1002129586

Fabspeed® - Full Exhaust System, Porsche 911 Series Fabspeed® - Full Exhaust System, Porsche 911 Series Fabspeed® - Full Exhaust System, Porsche 911 Series Fabspeed® - Full Exhaust System, Porsche 911 Series Fabspeed® - Full Exhaust System, Porsche 911 Series Fabspeed® - Full Exhaust System, Porsche 911 Series Fabspeed® - Full Exhaust System, Porsche 911 Series

Fabspeed® - Dyno Session 2017 Porsche 718-S Made In USA Fabspeed Authorized Dealer

$3,195.95 - $4,195.95

OUT OF STOCK - Unavailable until further notice

Guaranteed Fit

1978 Porsche 911 Series

911 Carrera / SC / Turbo Carrera
Requires slight modification to the factory rear bumper for proper fitment of the 2nd outlet.

Notes:

Remember to check your local and state laws regarding vehicle noise restrictions.

Authorized Dealer

Product Details

Porsche 911 Carrera / SC / Turbo Carrera 1978, Full Exhaust System with Split Rear Exit by Fabspeed®. Exhaust System Type: Full Exhaust. Exhaust System Sound: Aggressive / Loud. Complete high performance exhaust system provides loud & aggressive CUP car sound with dual outlets.

Notes

Remember to check your local and state laws regarding vehicle noise restrictions.

Fitment notes

Requires slight modification to the factory rear bumper for proper fitment of the 2nd outlet.

Specifications

Exhaust System Type: Full Exhaust

Exit Location: Split Rear

Exhaust System Sound: Aggressive / Loud

Horsepower (whp): +25

Torque (ft/lbs): +22

Weight (lbs): -43

Features

Major improvement in power throughout the RPM range
Saves 43 lbs from the rear of the vehicle
Loud and aggressive Cup car sound. Recommended for Track Use ONLY!
Constructed from high quality 14-16 gauge, C.N.C. mandrel bent T304 stainless steel tubing
RSR Long-tube headers feature equal length primary pipes with F1 style high velocity 3-into-1 pyramidal investment cast merge collectors
Dual outlet system comes with all required hardware
All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty
Designed to maximize horsepower and torque of your vehicle
Made with meticulous attention to detail and unmatched craftsmanship
Designed to get the most out of your exhaust system

For over 20 years, Fabspeed® has been engineering and manufacturing the world's finest stainless steel high-performance exhaust systems and components, air intake products, ECU tuning, and more, specifically-tailored for high-end sports cars and exotics. From Porsche to McLaren, the Fabspeed expertise is unmatched and it shows in everything that the manufacturer creates. Their dyno-proven performance products provide an exhilarating driving experience and are backed by a limited lifetime warranty. Being dedicated to providing maximum performance and true care and concern for the development of their products, Fabspeed strives to be a force of innovation within the industry.

Brand:

Fabspeed

Part Number:

FS.POR.911.RSRWHTS30 FS.POR.911.RSRWHT30 FS.POR.911.RSRWHS30 FS.POR.911.RSRWOHTS FS.POR.911.RSRWOHT FS.POR.911.RSRWOHS FS.POR.911.RSRWOH FS.POR.911.RSRWH30

Warranty

Limited Lifetime Warranty & Conditions

Fabspeed Motorsport USA™ products (excluding catalytic converters) are backed by a Limited Lifetime Warranty against defects in materials and workmanship which is extended to the original purchaser of the product(s). The catalytic converters used in Fabspeed Motorsport products are covered under warranty for 24 months from the date of purchase. Any catalytic converter issue(s) experienced outside of the established 24-month timeframe is the responsibility of the original purchaser.

Disclaimer: There is no warranty of sound quality or volume, as these are completely subjective characteristics.

Upon verification of warranty coverage, Fabspeed® will, at its sole option, repair or replace the defective product without charge. This is the only remedy the Consumer has for any loss or damage, however arising, due to nonconformity in or defect of the product.

Fabspeed Motorsport reserves the right to deny warrant service if it can be proved that the product failed or is failing due to accidental damage, external impact, abuse or misuse, track/race use, shipment, handling, storage, worn or faulty engine mounts and/or exhaust mounts, faulty location or installation, excessive vibration, internal explosion or backfire, maintenance in a manner not conforming to the Fabspeed® instructions, failure of a third party component, or the installation of the part(s) to a vehicle for which it was not intended.
Exhaust mounts and engine mounts must be checked at least every 12 months by a qualified technician and replaced as necessary. Valid evidence of this regular service may be required in the case of a claim. Fabspeed reserves the right to deny warranty replacement or repair if it is proved that a faulty engine or exhaust mount was responsible for the issue in-question. Attempted repair of a faulty Fabspeed product by anyone other than Fabspeed Motorsport or a Fabspeed-approved agent will void this warranty. .

Fabspeed offers a limited lifetime warranty on all of their performance products*. This warranty is offered to the original purchaser and protects against defects in materials and construction.

*Exclusions:
Catalytic converters: 2-year limited warranty (details below);
Exhaust tip finish: 1-year limited warranty;
Exhaust valves & (related electronics): 1-year limited warranty;

Fabspeed Motorsport Catalytic Converter Warranty:
Fabspeed products containing catalytic converters are protected by a 2-Year limited warranty against failure or defects in material and construction. This warranty does not apply if the product(s) has been installed on a vehicle that has been run with leaded race fuel or fuel additives.

In order for Fabspeed to replace a catalytic converter under the warranty, the following conditions and requirements must ALL be met:
1. Catalysts must not show any physical damage or signs of abuse. Signs of abuse include, but are not limited to, motorsport or on-track use, leaded fuel, fuel additives, etc.
2. Catalysts must be no more than two years in age from the original purchase date.
3. There are no visible exhaust leaks anywhere in the exhaust system upstream of the catalysts.
4. Two ECU printouts showing catalyst inefficiency faults. After the first printout the ECU fault memory is cleared. If the fault returns, a second printout should be made and submitted for warranty approval. Printouts must include operating conditions and vehicle hours.
5. No other faults which will alter the OEM or Fabspeed ECU tune air/fuel calibration should be present on the printouts for catalytic inefficiency (for example: codes for fuel trim, O2 sensors, MAF sensor, etc.)
6. A graph of the oxygen sensors before and after the catalyst must be supplied. This graph should show the oxygen sensors in operation on a fully warm vehicle in closed loop operation.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Fabspeed® - Full Exhaust System with Split Rear Exit

Fabspeed® - Full Exhaust System with Split Rear Exit

Product Details

Notes

Fitment notes

Specifications

Features

Related Links

Reviews