PIRELLI TIRES® - SCORPION™ ALL TERRAIN PLUS WITH WHITE LETTERING

O.E. High Performance All-Season tires are typically purchased as direct replacements for worn-out pairs/sets of the vehicle’s original tires. They can also be used for other vehicle applications in complete sets of four or axle pairs if available in an appropriate size, load range and speed rating to match the existing O.E. tires.

The tread compound is molded into an asymmetric tread pattern divided into distinct inner and outer elements to blend traction in snow and on ice with drivability on dry and wet roads. On the inside, they utilize Pirelli's ultra high performance tire structures to offer levels of performance not normally associated with winter tires.

For safe driving in winter too, winter tires are formulated with specific compound and an optimized tread pattern to ensure adherence and traction in cold weather conditions. Winter tires are at their best in lower temperatures, especially in rain and snow, but also on dry asphalt.

Pirelli tires have a quite stiff construction and do not usually require higher inflation pressures. They are designed for use at a pressure of approximately 2 bar, to be adjusted according to the type of car. The figures indicated refer to the “operating pressure”: the pressure of the tire when it is fully warmed up to working temperature. For accurate calibration, it is essential to consider that the difference in temperature between a “cold” tire and a “hot” one is quite significant, normally 0.5 bar.

Pirelli recommends the use of ordinary compressed air to inflate the tires, provided that the above procedures are followed. No special gases, such as nitrogen, are required unless the source of air is exposed to excessive humidity.

Always use a high-quality air pressure gauge in order to obtain reliable results. We also recommend that the valve stems of the wheels should be metal, instead of rubber, as they are more resistant to high temperatures.