Flowmaster® - Pipes Only Aluminized Steel Header-Back Exhaust System with Dual Rear Exit

Name: Flowmaster® - Pipes Only Aluminized Steel Header-Back Exhaust System with Dual Rear Exit
Brand: Flowmaster
SKU: mpn4636994292
Price: 499.95 USD
Availability: InStock

0 reviews|Item # mpn4636994292|Similar Products

Flowmaster® - Pipes Only Aluminized Steel Header-Back Exhaust System

Flowmaster® - How to Install Exhaust Band Clamps Flowmaster® - Exhaust Types Flowmaster® - Guide Flowmaster® - Types of Mufflers Flowmaster® - Exhaust Systems Comparison Flowmaster® - Warranty Flowmaster® - FAQ Flowmaster® - Catalogs Made In USA Flowmaster Authorized Dealer

$499.95

In Stock - Ships within 24 hrs

Guaranteed Fit

1969 Pontiac Grand Prix

Please Select Vehicle Below

Notes:

Use Offset Inlet / Offset Outlet Mufflers Only
Uses New Hangers (Not Included)
Remember to check your local and state laws regarding vehicle noise restrictions
This is a Race Only product that is to be used solely for competition. It cannot be used on vehicles that are operated on public streets, roads or highways. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. Shipping Restriction: CA, NY, ME

Authorized Dealer

Vehicle Fitment

Make	Model	Year
Buick	Skylark	1968-1972
Chevy	Chevelle	1968-1972
	El Camino	1968-1972
	Monte Carlo	1970-1972
Oldsmobile	442	1968-1971
Oldsmobile	Cutlass	1968-1972
Pontiac	Grand Prix	1969-1972
	GTO	1968-1972
	LeMans	1968-1969, 1972

Product Details

Pipes Only Aluminized Steel Header-Back Exhaust System with Dual Rear Exit by Flowmaster®. Exhaust System Type: Header-Back. Exhaust Tubing Material: Aluminized Steel. Main Tubing Diameter: 3". Exhaust System Sound: Aggressive / Loud. The Installer Series Pipe Kits are made for professional installations. They offer the same mandrel bent 16-gauge aluminized pipes of the Flowmaster header-back systems, but without the hangers and mufflers. They are made for custom built exhaust systems on modified vehicles.

Notes

Use Offset Inlet / Offset Outlet Mufflers Only
Uses New Hangers (Not Included)
Remember to check your local and state laws regarding vehicle noise restrictions
This is a Race Only product that is to be used solely for competition. It cannot be used on vehicles that are operated on public streets, roads or highways. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. Shipping Restriction: CA, NY, ME

Specifications

Exhaust System Type: Header-Back

Exhaust Tubing Material: Aluminized Steel

Exit Location: Dual Rear

Exit Configuration: Dual

Main Tubing Diameter: 3"

Exhaust System Sound: Aggressive / Loud

Finish: Gray

Tip Outlet Diameter: 3"

Tip Shape: Round

Tip Cut Type: Straight-Cut

Automotive Item Grade: High Performance

Exhaust Pipe Wall Maximum Gauge: 16

Features

Improve Exhaust Scavenging by Accelerating the Exhaust Gases
Improve Torque and Throttle Response
Retain Classic Flowmaster Sound
Mandrel Bent 16 Gauge Stainless Steel Tubing and Stainless Steel Muffler Assembly
Well Suited to Muscle Car Applications

The Installer Series Pipe Kits are made with modified trucks in mind. The kits make it easier and quicker to build a custom exhaust system for these vehicles, as the basic bends are already there. The kits require offset/offset or offset/center mufflers, hangers and tips for completion of exhaust systems.

Flowmaster® has its roots in solving the engine noise problems encountered by California racers in the 1980s. In 1983 Flowmaster’s founder, Ray Flugger, created his first patented design of racing silencers, which dampened noise with minimal loss of power. Ray attached handles to ease carrying the square shaped race mufflers through the race pits, and the mufflers became known as the "suitcase mufflers." Today, the innovative Flowmaster mufflers are the result of years of development with top race engine builders, thousands of hours of dyno research and "real-world" on-track testing.

Brand:

Flowmaster

Part Number:

1040FM

UPC:

700042019106

Alternate MPN:

1040FM

Warranty

Lifetime Limited Warranty applies to Flowmaster stainless steel mufflers, stainless steel exhaust systems, stainless steel pipes, air intake kits and oiled type filters (except cleaning kits) and other stainless steel exhaust accessories (except exhaust tips).

Three (3) Year Limited Warranty applies to Flowmaster aluminized steel mufflers, aluminized steel exhaust systems, aluminized steel pipes, exhaust tips and other non-race exhaust accessories.

Two (2) Year Limited Warranty applies to Delta Force Dry air intake filter elements.

One (1) Year Limited Warranty applies to Elite Series exhaust headers and electronic components such as Delta Boost modules. Flowmaster, Inc. (“Flowmaster”) extends the following limited warranty to the original purchaser of its mufflers, exhaust systems, pipes, exhaust tips, headers and other non-race accessories (hereafter “products”), excluding catalytic converters sold under the Flowmaster® brand.

This catalytic converter is warranted to be free from defects in materials and workmanship subject to the exclusion and conditions set forth below and subject to the durational limits in this paragraph.

EPA Catalytic Converter Warranty: The stainless steel body and the nipples alone are warranted for 5 years or 50,000 miles, whichever comes first. At the conclusion of the 5 year/50,000 mile or 25,000 mile period, whichever is applicable, all liability under this limited warranty shall terminate.

CARB Catalytic Converter Warranty: This catalytic converter has been designed and manufactured and is warranted to meet California Air Resources Board emission requirements for 50,000 miles. The stainless steel body and the nipples alone are warranted for 5 years or 50,000 miles, whichever comes first. At the conclusion of the 5 year/50,000 miles on stainless steel body and nipples or 50,000 miles on catalyst substrate, whichever is applicable, all liability under this limited warranty shall terminate.

Flowmaster warrants the products mentioned above against defects in materials and workmanship for the period set forth below, when they are owned by the original purchaser and remain installed on the vehicle on which they were originally installed. This warranty is void if the product was not installed properly on the vehicle, was installed on a vehicle for which it was not designed, or was removed from the vehicle on which it was originally installed and reinstalled on another vehicle. This warranty shall not apply to normal wear, cosmetic issues such as coatings and material discoloration, any product that was installed on a racing vehicle, installed improperly or contrary to Flowmaster instructions, altered, misused, repaired, damaged from an accident, collision, undercarriage road impact or debris, or willful or negligent act.

The warranty set forth herein for Flowmaster® stainless steel mufflers, stainless steel exhaust systems, stainless steel pipes and other stainless steel exhaust accessories (except exhaust tips) extends for a period of the life of the original vehicle the product was installed on. The warranty set forth herein for Flowmaster aluminized steel mufflers, aluminized steel exhaust systems, aluminized steel pipes, all exhaust tips and non-race exhaust accessories and commercial applications of aluminized steel products or stainless steel products extends for a period of three (3) years from the date of original purchase and the original vehicle it was installed on. The warranty set forth herein for Flowmaster exhaust headers extends for a period of one (1) year from the date of original purchase and the original vehicle it was installed on. Header warranty does not cover damages caused by exhaust insulating wrap, and is void if the product was installed on a new or rebuilt engine during the initial break-in period.

Flowmaster’s liability is expressly limited to the replacement of the product or refund of the purchase price as described herein. In no event shall Flowmaster be liable for any direct, indirect, special, incidental or consequential losses and/or damages, including but not limited to interruption of business or loss of business or loss of profit or damage to related components resulting from the use of or inability to use the product, or any breach of warranty or any defect in the product, even if Flowmaster shall have been advised of the possibility of such potential losses or damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights. You may also have other rights which may vary from state to state.

The warranties set forth herein are exclusive and unless otherwise required by applicable law no other warranties are made by Flowmaster® or are authorized to be made with respect to the product.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Flowmaster® - Pipes Only Aluminized Steel Header-Back Exhaust System with Dual Rear Exit

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!