Borla® - Touring™ Exhaust Systems

37 reviews|Item # sp230
Vehicle Specific
  • We need more information
Confirm Fitment
Authorized Dealer
$549.99 - $3,099.99
OUT OF STOCK - Unavailable until further notice

Features

  • Increases horsepower and torque
  • Increased Exhaust Flow for Better Performance
  • Better fuel economy at cruising speeds
  • Custom designed for each application
  • Patented straight-through muffler design reduces backpressure while absorbing sound waves
  • Mandrel-bent stainless steel tubes with diameters optimized for reduced restriction while maintaining exhaust gas speed
  • Made from the finest austenitic stainless steel for long-lasting durability
  • All welded construction
  • Backed by the exclusive Borla Million-Mile warranty
  • Proudly made in the USA

Product Details

Touring™ Exhaust Systems by Borla®. When you want the best performing, best sounding, and highest quality exhaust system, you want Borla. Borla straight-through mufflers and mandrel-bent exhaust tubes are custom tuned to deliver the most horsepower possible, with a subtle, slightly louder than stock sound at cruise. And the quality, aircraft-grade, austenitic stainless steel construction allows Borla to back every Cat-Back system with an unequaled million-mile warranty.

Replacing your factory exhaust system with an aftermarket performance system is a significant investment in money and time. Of course, you can always try saving money and going with a cheaper system, but you may only get an irritating exhaust tone without any real gains in power. The only silver lining with such a system is that it probably won't last, so at least you won't have to put up with it for long. Instead of going that route, just install a premium Borla Cat-Back exhaust system. You'll get the power and sound you want, with quality materials and construction that will make it the last exhaust system you'll ever need to buy for your car.

Borla custom designs each exhaust system for the specific application, to make the most horsepower and torque with the best sound quality. The patented straight through muffler design reduces restriction and increases exhaust gas velocity, making sure each cylinder is completely evacuated to make room for the incoming charge. This design absorbs the sound waves without disturbing the power waves, in contrast to the chambered mufflers used by most aftermarket companies. Chambered mufflers use partitions or baffles to subdue sound waves, which also creates backpressure and reduces power. The Touring series muffler has more interior capacity for a higher volume of sound absorbing composite filament.

The shape and diameter of the exhaust tubing is optimized for volume and exhaust gas velocity. Borla mandrel bends the stainless steel tubing for smooth bends and to make sure the pipe maintains its size and shape throughout the entire length. Tubes that aren't mandrel bent can lose a percentage of their diameter in sharp bends. This system features an "X" pipe, where the pipes behind the catalytic converter include a crossover junction. This junction reduces excessive backpressure created by close firing cylinders on one bank, allowing it to escape to the other side of the system, thereby improving low and mid-range torque.

But improved performance is only part of what you want in an aftermarket exhaust system, because all the horsepower in the world won't matter if it doesn't sound right. There's no need to worry with a Borla System. They have many years of automotive acoustical experience and the company is staffed with automotive enthusiasts just like you that listen and drive cars to make sure your system has the right sound to go with the power. The Touring system has a slightly louder than stock sound at cruise, but with a deeper note; like adding bass to your sound system without increasing the volume. And there's no annoying drone or resonance through the cabin.

Borla - Touring Series Exhaust Systems

Finally, the best power and sound is meaningless if the exhaust system rots away in a few years. Each Borla exhaust is made according to the highest quality standards using the finest materials and construction techniques to make sure this won't happen. They use austenitic stainless steel for their systems, which contains high levels of nickel and chromium, to resist corrosion. This material is harder than the lower grade stainless steel used by the OEM manufacturers, yet is very ductile. Nevertheless, the increased hardness requires special equipment to form and bend. The muffler contains a stainless steel perforated tube wrapped with several layers of stainless steel sound absorbing material and a layer of ceramic sound absorbing, high temperature material, all contained in a fully welded stainless steel shell.

The Borla Touring Series Stainless Steel Cat-Back Exhaust System comes complete with everything required for installation, including detailed instructions. Borla is so confident in the quality of this system that it's guaranteed against defects in materials and workmanship for one million miles.

Reviews

(37)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
1-10 of 37 Reviews
3 of 5
NOT a mild/stock sound
Bought this to replace the Droning flow master that came welded on with the truck when I bought it. Product came nicely packaged and protected. Took about 4 hours total of doing it by myself in the driveway most of which was getting the old exhaust off. Don't let the descriptions and videos online fool you, this is not by any means a quiet exhaust and their "anti-drone" technology is "eh" at best. The sound may be enjoyable to some, but I am not a fan. I will be removing it and returning to my old system until I can find another.
Borla® - Touring™ Stainless Steel Cat-Back Exhaust System with Split Rear Exit
Posted by Mike (Fort Worth, TX) / July 04, 20242019 Ram 1500
5 of 5
Fits 2022 Refreshed GMC 1500 AT4
Can't go wrong with Borla, the fit and finish was great, the install was straight forward and easy (did it on the ground, followed the instructions step by step). Sounds great! I had done the muffler delete and the drone was driving me nuts (especially when towing, but even at highway speed it was there). There is 0 drone with this system, yet the cold start sounds just about as mean as the muffler delete and the outside tone has a little less bass. The muffler while big, is still a straight thru design, so not worries about any flow restrictions.
Posted by Jean-baptiste (North Charleston, SC) / August 09, 20222022 Chevy Silverado 1500
5 of 5
2006 Mini Cooper S - Installation
After receiving my Stainless Steel Exhaust system from CARiD. I had a muffler shop install it. it was done in 1 hour. Looks great, sounds good. not too loud and not too soft. I do recommend this product. Plus i was told it can last 15years. I'm Happy.
Borla® - Touring™ Stainless Steel Cat-Back Exhaust System with Dual Rear Exit
Posted by Stephen (Cherry Hill, NJ) / December 22, 20212006 Mini Cooper
5 of 5
Borla Cat-Back Exhaust System for Chevy Avalanche
Sounds great and looks nice. Installation was straightforward, also quality materials. I wish that Borla made an exhaust system for Chevy Avalanche that had a configuration with duals/ exhaust tips the exited each side of truck not just on passenger side.
Borla® 140423 - Touring™ Stainless Steel Cat-Back Exhaust System with Dual Side Exit
Posted by David (Chicago, IL) / April 20, 20202012 Chevy Avalanche
5 of 5
Borla Touring Exchaust
This touring system is just what I was l looking for. A very mild throaty sound that only sounds good for me and not the whole neighborhood. the installation was a breeze, very well engineered. Awesome system.
Posted by Kevin (Oswego, NY) / May 07, 20182015 Toyota Tundra
5 of 5
Borla Exhaust System
Happy with the product!
Posted by Eduardo (West New York, NJ) / December 06, 20172017 Cadillac Escalade
4 of 5
New Sound From My 2010 Mercury
Can't see the product since it's under the car and no tail pipe extensions coming out the rear. But I can hear it and experience the performance upon acceleration. Don't know much about the installation experience cause my mechanic installed it. His auto shop had to order additional parts from Ford, hangers, rubber isolators and gaskets. I've always wanted dual exhaust on my Ford 4.6 V-8 since this is the last Mercury Grand Marquis Ford made. I was put wise to Borla because of a YouTube video. My Grandfather's 2003 Mercury Grand Marquis Borla dual exhaust install was the title of the video.
Posted by Edward M (Dundalk, MD) / August 07, 20172010 Ford Crown Victoria
5 of 5
Very Happy
Looks great sounds great. Mild performance improvement, nothing to write home about. I wanted a milder nice improvement and this was it! The perfect amount to sound good but still drive comfortably.
Posted by Trevor (Wildomar, CA) / October 14, 20162016 Chevy Silverado
5 of 5
Borla 11824 for CTS Coupe
The product came perfectly packaged, protected by heavy foam pieces that protected the exhaust system during shipment. All pieces came intact and you can tell upon inspection that this is a quality product. The heavy welds and the overall appearance of the hangars and fit/finish is top notch. I had this installed at the local muffler shop that I have dealt with for a long time and they even commented on the quality of this exhaust system. They had it installed in less than an hour. The sound is great, with a lower tone at startup and idle, but it comes to life when you accelerate! No drone inside and just adds that little bit of sound that the factory exhaust was missing. I now enjoy driving my car more. I did choose to have the pieces welded together, but I'm sure the factory clamps would have been sufficient, based on the quality of the clamps. Borla does not skimp on anything, and this system was made specifically for the year and model of my car. Looks like it came from the factory with this, but actually looks a lot better! Thank you CARiD!
Posted by Manuel (Land O Lakes, FL) / June 10, 20162013 Cadillac CTS
5 of 5
Brilliant Exhaust
When I first came across this exhaust on CARiD, I was eager to find out more about it. I searched everywhere for reviews and I couldn't find anything, especially for the base Cooper I own. So after 2 months of pondering, I decided to give it a shot and see how it is. The shipping speed of the exhaust was pretty quick. It took 3 days for it to arrive. And the exhaust came in a giant box with 2 decals and a Borla hat, which I thought was pretty cool. The exhaust itself was pretty dirty in the box, but I bought the Borla exhaust polisher and gave it a quick clean and it looked great. So I finally had the exhaust installed, and I was quite nervous because I had no idea what I was in store for. So as I turned on the car, I heard the most beautiful rumbling sound from the back of my car. I was absolutely pleased with it. As for the performance, it is easily noticeable the improved power the car produces. The car definitely is a lot louder with a great sound. I can even hear my intake system as I drive now. Seriously, if you're thinking about investing on this exhaust, I say do it. Thank you Borla. And thank you CARiD.
Posted by Christian (Atlanta, GA) / November 10, 20152005 Mini Cooper