Name: Smittybilt® 76631 - SRC Black Side Armors
Brand: Smittybilt
SKU: mpn4852187100
Price: 379.99 USD
Availability: InStock
Rating: 4.7 (9 reviews)

Vehicle Fitment

Jeep

Specifications

Name	SRC Black Side Armors
Powered	No
Coating Type	Powdercoated
Color	Black
Finish	Powder Coated
Sold As	1 Pair
Model (Series)	SRC
Side Step Style	Rock slider

Includes

(2) Side Armors
Mounting Hardware
Installation Instructions

Features

Dual girder system provides maximum wheel-to-wheel protection for underside and rocker panel area from damaging impacts
Keeps Jeep from catching on rocker panel and hanging up on obstacles
Also serves a helpful step in and out of the cab; particularly useful on lifted Jeeps
Heavy-duty 1.75" diameter .120" wall thickness tubes
One-piece design
Comes with detailed instructions

Product Details

SRC Textured Black Side Armors by Smittybilt®, 1 Pair. When you want the ultimate in rocker area protection as well as a helpful step up into your Jeep, you need SRC Side Armor. Instead of a single tube, these guards have 3 tubes with supports that form a girder system, for protection that extends from wheel-to-wheel and spans from the underside to the entire rocker panel. Constructed from heavy-duty 1.75" diameter 0.120" wall thickness tubing, these guards are dual stage powder coated in matte black.

Installation

Smittybilt® - SRC Black Side Armors Installation Instruction

Any kind of off-roading, but especially rock crawling, can be rough on your Jeep's rocker panels. Left unprotected, they can be severely damaged by impacts with rocks, tree stumps, and other obstacles. SRC Side Armor guards have 3 tubes instead of 1 that form a dual girder system, for maximum protection of these vulnerable areas. And these tubes extend from wheel-to-wheel and from the underside to just below the doors, for the most extensive protection available. They'll not only provide protection, their smooth surface will help keep you from getting snagged and hung up, so you can keep wheeling instead of trying to get unstuck. Plus, they'll serve as a step to give you an assist getting in and out of your rig.

Manufactured from heavy-duty 1.75" diameter 0.120" wall thickness tubes, the one-piece design arrives ready to install. Each guard is acid bath dipped to remove impurities, a special "E-Coat" is applied inside and out, and a dual stage matte black powder coat finish is applied. The SRC Side Armor is covered by a limited 5-year warranty against finish defects and a limited lifetime warranty against defects in materials and workmanship.

Smittybilt® - SRC Black Side Armors Installation Instruction Smittybilt® - Catalogs Smittybilt Authorized Dealer

Brand:

Smittybilt

Part Number:

76631

UPC:

631410079692

Warranty

LIMITED WARRANTY

Smittybilt warrants to the original purchaser of this product that should the product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within the warranty period of 1-year from the date of purchase, such defect(s) will be repaired or replaced (At the Company’s option) without charge for parts or labor.

This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through altercation, improper installation, mishandling, misuse, neglect accident or acts of nature. The extent of the company’s liability under this warranty is limited to the repair or replacement provided above and, in no event, shall the company’s liability exceed the purchase price paid by the purchaser for this product.

This warranty is in lieu of all expressed warranties and liabilities. Any implied warranties, including any implied warranty of merchantability shall be limited to the duration of this written warranty. Any action for breach of any warranty hereunder including any implied warranty of merchantability must be brought within a period of 90 days from date of original purchase. In no case shall the company be liable for any consequential or incidental damages for breach of this or any other warranty, expressed or implied, whatsoever. No person or representative is authorized to assume for the company any liability other than expressed herein in connection with the sale of this product. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage, therefore above limitations may not apply to you. This warranty gives the purchaser specific legal rights. The purchaser may have additional rights, which vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage, therefore above limitations may not apply to you.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(9)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

1-9 of 9 Reviews

Sort by

5 of 5

Built For Jeep...Installed on Avalanche

I bought the SRC Side Armor that is made for a 4 door Jeep hoping it would fit the lines of a Chevy Avalanche with body cladding. It turned out perfect. The side armor is very well made and was easy to modify to fit the bracket hardware for the avalanche.

Posted by Doug (Seabrook, TX) / October 28, 20142013 Jeep Wrangler

5 of 5

SRC Side Armor

These match the M.O.D. front bumper really well. Mine went on in 15 minutes (super easy). Super strong. I love them!

Posted by Darrin E (Menifee, CA) / May 23, 20142007 Jeep Wrangler

5 of 5

Smittybilt SRC Side Armor

I have the 2014 Jeep Wrangler. I ordered side armor, and they came a day earlier. The fit was pretty good, and I had to grind the body mount to get the nut on with socket. They look great. I would buy these again.

Posted by Jeffrey (South Paris, ME) / September 19, 20132013 Jeep Wrangler

4 of 5

Smittybilt SRC Side Armor

One side of the side armor step fit perfectly and was easy to install. However, the other side I had to grind to make larger holes for the screws to fit, since they did not match up properly. Once it took me 2 hours to grind, it fit perfectly, and all looks amazing.

Posted by Katelyn (Newton, MA) / July 13, 20132013 Jeep Wrangler

4 of 5

Great for the Use

If your looking for a rock slider these are a great option, they are very close to the door sill so they don’t help much as a step. Directions are unclear, they technically don't mount to the frame in a certain spot, basically anywhere, but once I figured that out the install was easy. Only issue besides the hassle of figuring out the mounting is the bed step sticks out very far, but it helps make sure you don't clip your rear tire on a rock.

Smittybilt® - M-1 Series Black Sliders

Posted by Kenneth (Monsey, NY) / November 01, 20182015 Ford F-150

5 of 5

Diamondback 4x4: Jeep & 4x4 Supplier

Packaging was quality to ensure a safe delivery. We purchased these items to have in our showroom for our Jeep customers.

Posted by Brian (Swannanoa, NC) / October 31, 20152007 Jeep Wrangler

5 of 5

Smittybilt 76638

Easy to install. Looks great!

Posted by John (Sylvania, OH) / September 10, 20152008 Jeep Wrangler

5 of 5

Purchase A Few Extra Quality 1/8 Bits

The bottom of the doors had started to rust. Would have been big bucks at a body shop. Getting body filler to look perfect takes a long time. Ground out the rust, hit it with rust converter and filled where needed. Placed these over the work. Looks like we will enjoy many more years with the Jeep. Did break a few bit drilling the holes for the pop rivets. Get a few to spare.

Posted by Michael (New Berlin, WI) / September 10, 20152000 Jeep Cherokee

4 of 5

SRC Rocker Guards

This was the second Smittybilt item. The first were tube doors that I had to grind on to make them fit. I was lucky in that I have pneumatic 'metal working' tools to do this with. Good looking products that is half-assembled.

Posted by Roger (Wills Point, TX) / July 12, 20132013 Jeep Wrangler

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!