Vehicle Fitment

Ford

Specifications

Exhaust System Type	Cat-Back
Exhaust Tubing Material	Stainless Steel
Exit Location	Split Rear
Exhaust System Sound	Aggressive / Loud
Finish	Natural
Muffler Series	Loud Mouth™
Catalytic Converter(s) Included	No
Exhaust Type	Dual
Exit Location	Split rear
Hardware Included	Yes
Intermediate Pipe Diameter (in.)	2.50 in.
Muffler Included	No
Quantity	Sold as a kit.
Remanufactured	No
System Finish	Natural/Polished
System Material	304 stainless steel
System Style	Cat-back
Tailpipe Diameter (in.)	2.50 in.
Tip Color	Polished
Tip Cut	Slant
Tip Edge Style	Rolled edge, double-wall
Tip Included	Yes
Tip Material	409 stainless steel
Tip Outlet Size (in.)	3.50
Tip Quantity	2
Tip Shape	Round

Includes

(1) Driver-Side Intermediate Pipe (Part Number 310304795)
(1) Passenger-Side Intermediate Pipe (Part Number 310304796)
(1) Driver-Side Over-Axle Pipe (Part Number 310304797)
(1) Passenger-Side Over-Axle Pipe (Part Number 310304798)
(2) Powerflo Muffler (M31004) (Part Number 308560782)
(2) Loud Mouth Resonator (M31007) (Part Number 310013919)
(2) Loud Mouth II Muffler (M31007A) (Part Number 310013818)
(1) Driver-Side Tailpipe (Part Number 310304792)
(1) Passenger-Side Tailpipe (Part Number 310304791)
(2) Tailpipe Tip (Part Number 310305785A)
(2) Ball Flange (Part Number 307334788)
(8) 2.5" Exhaust Clamp (Part Number 308144380)
(1) Instructions

Features

Mandrel-bent Tubing offers unbeatable flow characteristics
Up to a 15 Horsepower gain
35 lbs lighter than the OEM muffler assembly
Installs in under an hour
Constructed entirely from stainless steel
Emissions legal in all 50 states
Includes pre-welded hangers, detailed instructions and all necessary installation hardware
Covered by SLP's Performance Guarantee

Product Details

Loud Mouth™ Stainless Steel Cat-Back Exhaust System with Split Rear Exit (M31007) by SLP®. Exhaust System Type: Cat-Back. Exhaust Tubing Material: Stainless Steel. Exhaust System Sound: Aggressive / Loud. Kit includes polished Loud Mouth Shotgun resonators and hardware. Have you ever wished you could change up the tone or volume of your exhaust without having to purchase and install a new system? Why bottle your car's Engine up with restrictive, wimpy-sounding stock mufflers? Unleash the stallion within, with a Loud Mouth™ Exhaust System from SLP Performance Parts.

Installation

SLP® - Loud Mouth™ Stainless Steel Cat-Back Exhaust System Installation Instructions

These systems provide a noticeable performance gain and were designed using SLP's innovative modular technology. This enables consumers to change the performance and noise-level characteristics by switching from bullet-style Loud Mouth resonators, to quieter Loud Mouth II mufflers, in order to suit their individual requirements.

These systems were created using industry-exclusive modular design architecture, so that simply loosening a few band clamps, swapping muffler types and retightening, can change the performance, noise level and sound quality of your Camaro or Firebird. The F-Body Loud Mouth System is compatible with the included race resonator and original Loud Mouth II bullet-type race muffler (Part #31067), which you can purchase separately to gain complete control over both your car’s sounds and performance characteristics. Includes a Loud Mouth resonator.

Once the finest-kept secret of avid engine tuners and hardcore automotive individuals, powerful and sleek 'street legal' performance parts and accessories from SLP continue to bring significant performance gains, head-turning looks and fuel savings everywhere - on the streets, drag strips, asphalt ovals and road courses. Whether you dominate the race track or conquer city jungles, prep your road beast to your thrilling adventures with top-of-the-line SLP products breaking the mold in performance and innovation to keep motorists on the leading edge.

This high-end quality SLP upgrade is right what the doctor ordered for those who crave to get the most out of their late model American vehicle and spice it up with a little extra style. Known for using the latest engineering processes and extremely durable composites, SLP incorporates exceptional quality materials to ensure that this supremely efficient product meets or even exceeds stringent industry standards. Made to be tough-as-nails, this stunning upgrade is ready to withstand many years of extensive us while maintaining top-notch function, superior reliability and excellent looks for years to come. If you want to get maximum value for your money, dress up your performance machine with this SLP product.

SLP® - Loud Mouth™ Stainless Steel Cat-Back Exhaust System Installation Instructions SLP® - Exhaust Types SLP Authorized Dealer Catalog Warranty About us

Brand:

SLP

Part Number:

M31007

UPC:

871782000911

Warranty

This limited warranty supersedes and replaces all previously published warranties. There are NO OTHER warranties expressed or implied on SLP Performance Parts products. SLP Performance Parts warrants its products to be free from defects in material and workmanship as follows:

Headers and Exhaust Products: Limited Lifetime*
Composite Body Parts: 1 Year
Engines: 1 Year
Engines Components: 90 Days
Wheels: 1 Year
Suspension Parts: 90 Days
Accessories (shifter knobs, wheel-lug or center caps, car covers, emblems, etc.): 90 Days
Cold-Air Intake Systems (excluding filters): Limited Lifetime*
Programmers: 2 Years
Transmission/Driveline: 90 Days
Electrical Products: 30 days
Superchargers: 3/36**
Painted Parts: 1 Year

SLP's parts are warranted from the original purchase date shown on the sale's invoice. During the warranty period, SLP Performance Parts will repair or replace, at its discretion, any product found to be defective in material or workmanship.

In the event of a possible defect in material or workmanship, the responsibility of SLP Performance Parts, Inc. is strictly limited to the repair or replacement of the SLP product. SLP Performance Parts, Inc. is not responsible for improper installation, incidental and consequential damages, property damage, personal injury damages, labor costs, transportation or other incidental or consequential charges; or storage or rental-car charges, to the extent permitted by law.

SLP Performance Parts products are designed to work on stock, unmodified vehicles, as supplied by the original manufacturer. Due to the complexity and variety of modifications possible, SLP Performance Parts makes no claims as to the merchantability or fitness of any part. Rather, it is up to the purchaser to determine if the part is compatible with his/her application.

Example: If you ordered the products to be shipped by normal freight, it is the responsibility of the customer or installation facility to inspect ALL parts and determine if the products are correct, prior to installation or disassembly.

The following are specifically excluded from the SLP warranty:

Parts altered, modified, or used in applications not specifically noted in the SLP Performance Parts application guide.
Damage from misuse, improper installation, or unauthorized repairs or maintenance (including consequential damage).
SLP Performance Parts specifically disclaims responsibility for any of its products' compatibility with aftermarket parts produced by other companies or with vehicles that have been otherwise modified.
Incidental or consequential damages, including labor or diagnostic charges to determine failure.
Repairs to SLP Performance Parts products performed by unauthorized persons or organizations.
Costs for vehicle downtime or loss of vehicle use due to inoperability.
Normal wear and tear.
Prep or paint charges for any body part not trial-fit or "seasoned" per SLP Performance Parts instructions before painting.
Products used for racing.

* Limited Lifetime Warranty for Headers, Exhaust, and Cold-Air Systems: Headers and exhaust components are warranted for life against rust, corrosion, failed welds, cracks, and similar defects under normal use. Discoloration of coatings is NOT covered. Damage caused by excessive heat (from lean combustion or use of "heat wraps"), flood, collision, modification, or road hazard IS NOT COVERED. All other aforementioned exclusions apply. After evaluation SLP Performance Parts will, at its discretion, repair or replace the part. In the case of headers, only the affected part(s) will be repaired or replaced.

Cold-air inductions/air boxes are warranted for life against rust, corrosion, failed welds, cracks, and similar defects in material or workmanship under normal use. Appearance of coatings or finishes is warranted for 3 years. Damage from collision, alteration, misuse, or improper installation is not covered. Filters are not covered.

**Supercharger Parts Warranty: EATON TVS supercharger assemblies and components are warranted for 3 years or 36,000 miles from date of purchase. In order for this warranty to be in effect, the Supercharger warranty registration card must be filled out completely at time of sale, and mailed to SLP along with a copy of the original Invoice.

Supercharger warranty is limited to assemblies and components only, and covers defects in materials or workmanship. At the discretion, comapany will repair or replace any supercharger part that fails while the supercharger is in service within the warranty period. Warranty does not cover labor, consequential damage, failure due to improper air filtration, alteration, misuse, accident damage, faulty installation, faulty repair or when used in applications for which they were not designed or approved. Electrical parts including fuel and intercooler pumps only have a one year warranty.

These warranties give you specific legal rights, and you may have other legal rights, which vary from state to state. SLP reserves the right to modify its warranty policy without notice.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(10)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

1-10 of 10 Reviews

Sort by

4 of 5

Loud Pipes

For my son's Camaro, they look great. They sound deep when tank is full, when low on gas or not full they sound normal. Driving down the road not too loud, but when you accelerate they hum really well. My son likes the sound and the attention he gets. Not too loud for neighbor complaints which is good. Alignment on right side is off, it sits flush with exhaust holes on his 2012 model on that side. Noticeable to only us and after many tries and adjustments to correct it. He says he needs to get a tuner for it to reset the settings which is about $600. I see where folks recommend that, he can buy that on his own. Got him a spoiler and this and his clean car now looks and sounds like a race car.

SLP® 31201 - Loud Mouth™ Stainless Steel Axle-Back Exhaust System with Split Rear Exit

Posted by Customer / June 08, 20212011 Chevy Camaro

5 of 5

Absolutely Love It!

This exhaust system is amazing, it will shock you how quite your car ounce was. If you want loud this is the one especially for the price. The sound it made when my 2014 Camaro rs made when it was started blew me away. It makes good sound in the cabin and better outside. This exhaust will bring smiles to your face as you hear the roar of the exhaust.

SLP® - Loud Mouth™ Stainless Steel Axle-Back Exhaust System with Split Rear Exit

Posted by Jason (Crete, NE) / June 06, 20212014 Chevy Camaro

5 of 5

SLP Loudmouth Catback Exhaust

I love it, sounds amazing! Thank you!

SLP® D31040 - Loud Mouth™ Stainless Steel Cat-Back Exhaust System with Split Rear Exit

Posted by Customer / May 20, 20212013 Dodge Charger

4 of 5

2006 Dodge Charger RT

Just added with cold air intake & tune and car sound perfect. Longtube headers & camshaft will complete the aggressive sound but I approve slp loud mouth cat back exhaust.

SLP® - Loud Mouth™ Stainless Steel Cat-Back Exhaust System with Split Rear Exit

Posted by Jaylen (Rosamond, CA) / March 31, 20212006 Dodge Charger

5 of 5

2014 Dodge Charger R/T

Sounds great. Took about an hour to install after the old one was off. The only thing I wish that came with it was the rubber brackets for the exhaust, but other than that 100% satisfied.

SLP® - Loud Mouth™ Stainless Steel Cat-Back Exhaust System with Split Rear Exit

Posted by Matthew (Sugarcreek, OH) / March 13, 20212014 Dodge Charger

5 of 5

Great

Have to have it welded into place to keep it from sagging and rattling but the old exhaust system from it being an old state trooper care was welded but I love it.

SLP® D31040 - Loud Mouth™ Stainless Steel Cat-Back Exhaust System with Split Rear Exit

Posted by Customer / June 05, 20202014 Dodge Charger

5 of 5

2014 Dodge Charger R/T

I love it I don’t regret buying it! If you want a loud exhaust this is definitely the way to go!! Especially for what you pay for you can’t argue with that it’s pretty much a straight pipe with a straight-through resonator also Installation was easy.

SLP® - Loud Mouth™ Stainless Steel Cat-Back Exhaust System with Split Rear Exit

Posted by Oscar (Fort Pierce, FL) / April 07, 20202014 Dodge Charger

5 of 5

Very Nice

It took about an hour to put it on ourselves instead of taking it to a shop that would charge a lot of money for it... if you have the tools to do it I would suggest to do it yourself if you have the time. Other than that it sounds pretty good.

SLP® - Loud Mouth™ Stainless Steel Cat-Back Exhaust System with Split Rear Exit

Posted by Xavier (Bolivar, MO) / March 06, 20202006 Dodge Charger

5 of 5

Awesome Kit

I love my SLP exhaust kit. I has a really mean sound to the as well. I think my neighbors may hate me for this. I was also really easy to install, and they look great.

Posted by Justin (Moody, AL) / March 25, 20182006 Chrysler 300

5 of 5

Excellent

Excellent.

Posted by Navdarshini (Columbia, MD) / March 11, 20182014 Dodge Charger

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

SLP® M31007 - Loud Mouth™ Stainless Steel Cat-Back Exhaust System with Split Rear Exit

Vehicle Fitment

Specifications

Includes

Features

Product Details

Installation

Reviews

Questions and Answers