Categories

Featured Brands

Your Plymouth Barracuda shouldn’t have to be garage-bound just because it’s from a past era. Plymouth Barracudas are still very presentable as far as vehicle exterior and outline are concerned. All you have to work on is the engine power and performance and you will soon be driving yours every day on the commute rather than using it occasionally. Choose to install a custom built exhaust system and watch as your Plymouth Barracuda comes alive right before your eyes. Custom Plymouth Barracuda exhaust systems are designed specially to boost engine power. This they achieve by enhancing the evacuation of exhaust gases. Their shape and large diameter pipes provide the needed wide passage for the exhaust gases to escape speedily. A modern technology employed in the exhaust system construction creates a low pressure zone outside the engine cylinder, so that the spent gases are pushed from the high pressure engine zone into the exhaust systems and eliminated from the vehicle.

Buy your exhaust system from CARiD in order to get the best quality in the market. There are plenty of cheap exhaust systems, but none measure up to the standards set by the brands sold at CARiD. Durable, high performance and value-laden, CARiD’s range of Plymouth Barracuda exhaust systems far outshine’s that of cheap OEM versions. They are constructed using top grade stainless steel for guaranteed endurance and corrosion resistance. The manufacturers also issue a lengthy warranty with each exhaust system, in most cases a lifetime warranty which assures you of their support for as long as you own the Barracuda. You will be glad to get a change in exhaust sound, all thanks to the new custom Barracuda exhaust system. The rickety factory exhaust note will be replaced by a deeper hum with underlying soft notes.

Show items:
Sort by:
    • (54 reviews)
      # sp17451
      Exhaust System by Borla®. This unique system allows you to adjust your level of sound and power, from quiet and restrictive to louder and free flowing. It features a patented Borla straight-through muffler and mandrel bent pipes...
      A selection of block-off plates allows you to adjust exhaust flowPlate with larger hole for increased power and a more aggressive exhaust note
      $315.99 - $2,794.99
    • (0 reviews)
      # sp18673
      Stainless Steel Crate Muffler by Borla®. Muffler Body Material: Stainless Steel. Muffler Body Length: 14". Muffler Body Height: 4.35". Muffler Body Width: 9.1". Muffler Body Shape: Oval. Give your ride the sound it deserves!...
      Made of High Quality Aircraft-Grade, Brushed-Finish T-304 Stainless SteelProudly made by master craftspeople at factory in Johnson City, TN.
      $220.99 - $255.99
    • (0 reviews)
      # sp17449
      Exhaust System by MagnaFlow®. These premium line exhaust systems for diesels with particulate filters include mandrel-bent stainless steel tubing, 100% stainless steel mufflers, optional muffler delete pipes, band clamps, and...
      Moderate - Aggressive SoundBuilt In Stainless Steel For Durability
      $208.68 - $3,241.81
    • (0 reviews)
      # sp598
      Street Series Exhaust System by MagnaFlow®. The Street Series is designed for customers seeking increased performance and better economy, combined with a powerful and well tuned exhaust note, making a real statement within legal...
      Moderate SoundDelivers More Horsepower
      $354.36 - $3,241.81
    • (0 reviews)
      # sp17108
      Classics™ Stainless Steel Exhaust System by Borla®. Now, at long last you can get a Borla quality stainless steel exhaust for your Classic Car! You get the same patented flow through muffler design for increased performance with...
      Increased exhaust flow for better performanceHorsepower and torque increased by 7 – 10%
      $991.99 - $1,171.99
    • (19 reviews)
      # sp17463
      409 SS Cat-Back Exhaust System with Violator Muffler by Pypes®. Want that rumble when you start up your truck? How about that growl when you step on the gas and run along side a little Honda hatchback? Pypes' Gas truck systems...
      High Quality 409 SS ConstructionBetter Fuel Economy
      $169.99 - $849.99
    • (14 reviews)
      # sp9626
      Stainless Steel Exhaust System by Pypes®. Get a lot of bang for your performance buck with this rewarding exhaust system by Pypes Exhaust. It's a perfect way to beef up engine power and torque as well as throttle response and...
      Designed to deliver the ultimate in sound and performanceProvides extra punch in the passing lane and improves mileage
      $169.99 - $827.21
    • (1 review)
      # sp9623
      Stainless Steel Gas Truck Exhaust System by Pypes®. Want that rumble when you start up your truck? How about that growl when you step on the gas and run along side a little Honda hatchback? Pypes' Gas truck systems offer the best...
      High Quality 409 SS ConstructionBetter Fuel Economy
      $169.99 - $827.21
    • (1 review)
      # sp231
      Stainless Steel Header by Borla®. Not compatible with power steering. 304 stainless steel for long life. Connects to the factory mid-pipe. Mandrel-bent for smooth curves. Million Mile warranty.
      Austenitic 304 stainless steel tubing means a lifetime product that won't ever corrode or deteriorateAll bends are mandrel-bent for smooth transitions and maximum flow characteristics
      $659.99 - $1,319.99
    • (0 reviews)
      # sp16175
      Block Hugger Street Rod Headers by Hedman Hedders®. Hedman’s Standard Block Hugger design is ideal for factory manifold replacement or engine swap projects that do not have a hedder designed specifically for the application.
      Low profile designBuilt of High Quality Materials
      $182.09 - $626.04
    • (0 reviews)
      # sp16177
      Elite Ultra-Duty Street Headers by Hedman Hedders®. Hedman's ELITE Hedders are the best you can buy. They have thicker flanges. stronger wall tubing and a thermal coating that withstand full-throttle thrashing and torturous towing.
      Made of High Quality MaterialsIdeal for Heavy Duty Applications
      $367.08 - $790.54
    • (0 reviews)
      # mpn4036603447
      Mild Steel Exhaust Headers for Pro-Touring Set-Ups by Hedman Hedders®. Primary Tubing Diameter: 1.75". Collector Outlet Diameter: 2.5". Color: Black. Header Coating: Ceramic Coating. Header Style: Short Tube. Ideal for use on...
      High quality at an affordable priceExpertly made from premium materials
      $483.32
    • (0 reviews)
      # sp16183
      Standard Duty Black MAXX Coated Headers by Hedman Hedders®. 1 Pair. Includes Bolts/Studs, Gaskets, Reducers. Header made from Steel. The standard-duty Black Maxx™ Hedman Hedders come from the factory with an extremely durable,...
      Made of High Quality MaterialsExtremely durable, protective SATIN BLACK ceramic-metallic coating
      $449.24 - $853.36
    • (0 reviews)
      # sp16186
      Tight Tubes Street Rod Headers by Hedman Hedders®. Primaries Diameter: 2". Collector Diameter: 3". 1 Pair. Includes Bolts/Studs, Gaskets, Reducers. Header made from Steel. Professional car builders and seasoned gearheads use...
      Lowest Profile Header Collector AvailableMade of High Quality Materials
      $269.91 - $628.65
    • (1 review)
      # sp9307
      Performance Long Tube Header by Flowtech®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Flowtech Exhausts will...
      Mandrel-formed Power Plenum collectors for low backpressureLong transition collectors with merge spears for maximum flow and increased exhaust velocity
      $150.95 - $1,099.95
    • (0 reviews)
      # sp17172
      Full Length Header by Doug's Headers®. Port Shape: OVL. Collector: 3". Primary Tube: 1-5/8". Pair. 1-5/8" 3". Doug's headers are carefully developed on the vehicles they are intended to fit and are re-checked numerous times during...
      High quality at an affordable priceExpertly made from premium materials
      $503.04 - $1,133.24
    • (0 reviews)
      # sp17203
      Full-Length Headers by Patriot Exhaust®. Collector Diameter: 3". Header made from Steel. Don't give up looking for headers for your vehicle. Patriot offers headers for many applications at prices you can afford. Built with surface...
      Expertly crafted from premium materialsQuality design and workmanship
      $217.33 - $687.03
    • (0 reviews)
      # sp17204
      Tight Tuck Street Rod Headers by Patriot Exhaust®. Tight Tuck headers are the solution to many problems associated with engine swaps in modern street rods. Tight Tucks fit in the tightest of engine compartments and clear most stock...
      Expertly crafted from premium materialsQuality design and workmanship
      +1
      $153.74 - $643.11
    • (1 review)
      # sp4406
      VT™ Muffler by DynoMax®. The revolutionary DynoMax VT performance muffler will give your vehicle a deep, throaty sound and eliminate drone while increasing exhaust flow and horsepower. It is built using the exclusive DynoMax...
      Unrestricted, straight-through design for a dyno-proven increase in horsepower and torqueExclusive DynoMax Valve Technology delivers on-demand, drone-free performance and sound
      $97.04 - $370.74
    • (0 reviews)
      # mpn739977957
      304 SS Rectangular Dual Exhaust Tips by Pypes®. Tip Shape: Rectangular. Tip Attachment Style: Clamp-On. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and...
      High quality at an affordable priceExpertly made from premium materials
      $191.96
    • (0 reviews)
      # mpn739978498
      409 SS X-Pipe by Pypes®. Material: 409 SS. Main Piping Diameter: 3.5". Upgrade your exhaust system with the superior Pypes Exhaust mandrel bent Pipes that will help unleash your engine's beast in no time flat. Demonstrating both...
      Superior upgrade for your exhaust systemDesigned to provide outstanding performance
      $215.04
    • (0 reviews)
      # sp95734
      Header Flange Gaskets by Hedman Hedders®. Hedman gaskets are made of a special gasket material developed for Hedman. Accept no substitute.
      Made of High Quality MaterialsEasy to Install
      $5.34 - $30.51
    • (0 reviews)
      # sp20676
      Aluminum Header Gasket Set by Flowtech®. Includes 1 Pair Head Flange Gaskets, 1 Pair Exhaust Collector Gaskets. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art...
      Engineered for a precise, easy fitManufactured of P73 Ferroglass non-asbestos facing material for long life
      $10.29 - $14.42
    • (0 reviews)
      # sp14198
      Super Competition Fiber Header Gasket by Hooker®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Hooker will...
      Precision fit for improved sealingSteel core provides superior adhesion
      $13.21 - $14.32
    • (2 reviews)
      # sp32336
      Exhaust Gasket Set by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it's a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you'll need gaskets and manifold bolts.
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $13.63 - $37.91
    • (0 reviews)
      # sp97850
      Performance Exhaust Header Gaskets by Spectre®. Rooted in racing, Spectre Performance designs and builds every product with the same goal in mind - the best performance in the market proven on the racetrack! All products are...
      High-tech engine parts for the most power and best performanceThe finest exterior and interior parts for superior appearance and functionality
      $8.69 - $17.37
    • (0 reviews)
      # sp24021
      Graph Flex Header Flange Gasket by Taylor Cable®. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of Legendary Quality. Designed utilizing the latest...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $23.50
    • (0 reviews)
      # mpn2114194
      Graph-Flex™ Rectangle Port Exhaust Header Gaskets by Taylor Cable®. These extreme high-temperature gaskets are well-suited for highly-modified engines: turbocharged, supercharged, nitrous or fuel. This is a premium,...
      Malleable stainless steel metal coreWill survive 2000°F exhaust temperatures for extended periods
      $23.50
    • (0 reviews)
      # mpn1593909458
      HTR Rectangle Collector Gaskets by Taylor Cable®. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of Legendary Quality. Designed utilizing the latest...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $18.40
    • (0 reviews)
      # mpn1593909456
      HTR Square Collector Gaskets by Taylor Cable®. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of Legendary Quality. Designed utilizing the latest technology,perfect...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $18.40
    • (0 reviews)
      # mpn2115701
      Seal-4-Good™ Rectangle Port Exhaust Header Gaskets by Taylor Cable®. These extreme high-temperature gaskets are well-suited for highly-modified engines: turbocharged, supercharged, nitrous or fuel. This is a premium,...
      Multi-layered for excellent conformability and sealSeals even imperfect flanges
      $34.41
    • (0 reviews)
      # mpn2115700
      Seal-4-Good™ Square Port Exhaust Header Gaskets by Taylor Cable®. These extreme high-temperature gaskets are well-suited for highly-modified engines: turbocharged, supercharged, nitrous or fuel. This is a premium,...
      Multi-layered for excellent conformability and sealSeals even imperfect flanges
      $34.41
    • (0 reviews)
      # sp24024
      XX Carbon Header Gasket by Taylor Cable®. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of Legendary Quality. Designed utilizing the latest technology,perfect for...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $19.17 - $21.34
    • (0 reviews)
      # mpn2118382
      XX Carbon™ Rectangle Port Exhaust Header Gaskets by Taylor Cable®. These extreme high-temperature gaskets are well-suited for highly-modified engines: turbocharged, supercharged, nitrous or fuel. This is a premium,...
      Malleable stainless steel metal coreWill survive 2000°F exhaust temperatures for extended periods
      $21.34
    • (0 reviews)
      # mpn358507494
      MLS Exhaust Header Gasket by Cometic Gasket®.
      Made of High Quality MaterialsBuilt to Last
      $38.69
    • (0 reviews)
      # sp33365
      Seal-4-Good Header Gasket by Percy's High Performance®. The Percy's Seal-4-Good Reusable Flange Gaskets are multi-layered and made from a special "Dead Soft" Aluminum, which conforms to header flanges for the ultimate seal. Since...
      Built to match your exact requirementsHigh quality you can rely on
      $31.03 - $34.41
    • (0 reviews)
      # sp87026
      Exhaust Header Gasket by Remflex®. Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees - day after day, week after week,...
      Remflex exhaust gaskets come in a standard 1/8" thickness and are designed to crush 50%. This allows them to fill gaps in the flange surface up to 1/16"100% flexible graphite construction means Remflex gaskets are good for up to 3,000 degrees F - far exceeding that of any vehicle's exhaust system temperature
      $16.47 - $39.19
    • (0 reviews)
      # sp75010
      Accu Seal Pro Header Gaskets by SCE Gaskets®. 2 Pieces. Available for applications ranging from specialized racing engines to OEM replacement, SCE offers embossed copper (Pro Copper), high temperature reinforced composite, copper...
      Perfect solution for racing and high-performance engine applicationsManufactured using advanced engineering and on-track testing
      $22.64 - $30.36
    • (0 reviews)
      # sp75012
      Pro Copper Embossed Header Gaskets by SCE Gaskets®. 2 Pieces. SCE Gaskets invented embossed copper exhaust gaskets and they are the most effective way to insure leak-free, re-usable performance on aftermarket headers or stock iron...
      Perfect solution for racing and high-performance engine applicationsManufactured using advanced engineering and on-track testing
      $25.63 - $73.33
    • (0 reviews)
      # sp14626
      Exhaust Header Gasket by Schoenfeld Headers®, 1 Piece. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and meticulous attention...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $10.28 - $14.78
    • (0 reviews)
      # sp22223
      Exhaust Manifold Gasket Set by Magnum Gasket®. You'd better be ready to take the heat if you're going to seal an exhaust manifold, where temperatures can often exceed 1,000°F. You can count on Magnum to offer the best combination...
      Made of High Quality MaterialsThe best combination of steel layers and high-temp gasket materials
      $5.59 - $24.20
    • (0 reviews)
      # mpn474702208
      Copper Exhaust Header Gasket by Big End Performance®. Type: 1.700"x 1.475" - Max Wedge. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in...
      $34.05
    • (0 reviews)
      # sp29899
      Copper Exhaust Header Gasket by Big End Performance®. This Big End Performance product is just the option for you in case you want to get the most out of your auto. It is made from first-rate materials to provide the highest level...
      Designed to boost your vehicle's performanceMade from high-quality materials
      $34.05 - $47.41
    • (0 reviews)
      # sp3663
      Header Bolts by Mr. Gasket®. Whatever exhaust system you install on your engine, whether it’s a set of chromed headers or simply a set of cleaned up flat black rams horn manifolds, you’ll need gaskets and manifold bolts.
      Gaskets for every application, from mild to wildAluminum, copper or steel gaskets
      $8.15 - $42.81
    • (1 review)
      # sp46872
      Vibe-Lock Header Bolt Kit by Taylor Cable®. This products is an OEM and Performance company that was built on its founding heritage supported by a tradition of Legendary Quality. Designed utilizing the latest technology,perfect for...
      Designed to deliver trouble-free, consistent performanceRight for your vehicle and lifestyle
      $14.91 - $186.35
    • (0 reviews)
      # sp92620
      Header Bolts by Milodon®.
      Painstakingly designed to meet your racing needsState-of-the-art manufacturing technology
      $7.95 - $10.95
    • (0 reviews)
      # mpn358726796
      Small Head Exhaust Header Bolts by Trans-Dapt®. Miniature Head; 3/8"-16 x 3/4".Fastener made from Steel. Mini 3/8" head header bolts make installation and removal a breeze. 7/16" Wrench Size. Mini 3/8" head header bolts have a...
      $5.31
    • (0 reviews)
      # sp32266
      Standard Head Header Bolts by Trans-Dapt®. Standard header bolts, from Trans-Dapt Performance Have a 7/16" head size for use with headers. For even tighter fitting applications, use Trans-Dapt's Small head bolts with a 3/8" head...
      Designed to boost your vehicle's performanceMade from high-quality materials
      $5.21 - $8.10
    • (0 reviews)
      # sp104163
      Heavy Duty U-Bolt Clamp by Walker®. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete exhaust job. When you choose Walker...
      Makes installation quick and easyOptimal OE-style fit and quality
      $0.91 - $208.50
    • (11 reviews)
      # sp109145
      Insulator by Walker®. With their extensive selection of accessories and hardware for the exhaust system, Walker will provide you with everything needed to do the complete exhaust job. When you choose Walker accessories, you get...
      Makes installation quick and easyOptimal OE-style fit and quality
      $0.86 - $40.35
    • (0 reviews)
      # mpn82057
      Exhaust Bracket by Goodmark®. Some other restoration sheet metal companies may carry popular panels like hoods, fenders and quarter panels, but far too often they come up empty when you need supporting parts like braces, brackets...
      Faithful reproduction of the original partHighest quality sheet metal parts available
      $23.06
    • (0 reviews)
      # mpn77451
      Exhaust Bracket by Goodmark®. Some other restoration sheet metal companies may carry popular panels like hoods, fenders and quarter panels, but far too often they come up empty when you need supporting parts like braces, brackets...
      Faithful reproduction of the original partHighest quality sheet metal parts available
      $20.05
    • (0 reviews)
      # sp4472
      Exhaust Manifold Gasket Set by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the gaskets meet specific...
      Direct OEM replacement for a proper fitEnsures reliable sealing performance
      $3.09 - $88.76
    • (1 review)
      # sp5611
      Exhaust Manifold Gasket Set by Victor Reinz®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver...
      High quality at an affordable priceExpertly made from premium materials
      $0.92 - $79.69
    • (1 review)
      # sp103872
      Exhaust Manifold Gaskets by Victor Reinz®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver...
      High quality at an affordable priceExpertly made from premium materials
      $0.92 - $79.69
    • (0 reviews)
      # sp109736
      Multi-Layer Steel Exhaust Manifold Gasket Set by Victor Reinz®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your...
      High quality at an affordable priceExpertly made from premium materials
      $3.72 - $89.51
    • (0 reviews)
      # sp4473
      Exhaust Pipe Flange Gasket by Fel-Pro®. If you need durable gaskets to prevent leaks on your vehicle, Fel-Pro is the way to go. Engineered using the latest technologies and global engineering resources, the gaskets meet specific...
      Direct OEM replacement for a proper fitEnsures reliable sealing performance
      $0.98 - $30.35
    • (0 reviews)
      # sp5609
      Exhaust Pipe Flange Gasket by Victor Reinz®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver...
      High quality at an affordable priceExpertly made from premium materials
      $1.25 - $22.29
    • (0 reviews)
      # mpn1453327691
      Muffler Hangers by OER®. Pair. Reproduction muffler hangers. These hangers secure the rear side of the muffler to the trunk floor. Pre-packaged in polytube.
      Factory original quality for lessDirect fit replacement
      $63.22
    • (0 reviews)
      # mpn3513651607
      Graphite Header Flange Gasket Kit with Steel Core by Doug Thorley Headers®. Set of 2. Stock Ports. Replace your worn gaskets with Doug's high quality graphite and steel gaskets. Much better sealing capabilities and longevity over...
      Driven by a passion for performance and superior qualityDesigned to maximize horsepower and torque of your vehicle
      $35.00




    Guides & Articles

    • Performance Exhaust Systems
      May 17, 2016
      Here's A 'Tip': Exhaust Tips Are An Easy Way To...
      Performance exhaust systems give you improvements in power output, sound levels, and appearance, all in one package. But let's face it: not everyone has the spare...
    • Performance Exhaust Systems
      August 18, 2015
      Are Headers Worth The Performance Improvement?
      Engines have often been compared to air pumps, because the engine that’s most efficient in terms of economy and power is the one that can get air in and out of its...
    • Performance Exhaust Systems
      August 18, 2015
      Are X-pipes and H-pipes Better Than Straight...
      You may be wondering why so many aftermarket performance exhaust system manufacturers are offering dual exhaust systems connected by "H-pipe" or "X-pipe" sections....
    • Performance Exhaust Systems
      August 17, 2015
      Power, Sound, Looks | Can I Have It All With a...
      It's an age-old question that many have asked. Will an aftermarket exhaust be worth the expense? While they definitely can be, an important question to ask yourself is...
    • Bed Accessories
      April 17, 2015
      Pickup Truck Cab And Bed Sizes Are Important...
      Americans love to have choices. Buying a dress shirt? Decide solid or stripe, short or long sleeve, cotton or poly blend, button or spread collar, regular fit, slim...
    • Replacement Exhaust Parts
      August 01, 2014
      Direct Fit vs. Universal Mufflers
      Regardless of whether you're shopping for a simple replacement muffler that delivers original equipment (OE) sound and performance or an upgraded muffler which...

    Popular Products




    Related Plymouth Barracuda Pages
    Plymouth Barracuda Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.