Categories

Featured Brands

Want to improve the performance of your Mercury Comet? Consider fitting it with a brand new performance exhaust system from CARiD. Mercury customs exhaust systems are built to pull exhaust gases away from the engine, in this way eliminating the hindrance that prevents the engine from generating as much power as it is capable of. The stock exhaust restricts exhaust flow, only allowing a small amount of exhaust gases to make its way out of the engine at any given time. Spent gases stagnate within the engine, inhibiting the flow of fresh air and fuel needed for the generation of power. This lowers total power output. Replacing your stock exhaust system with a custom built one will eliminate this problem and push the engine to produce the maximum power possible.

There is plenty to choose from and you cannot go wrong with any of our brands because we only deal with the best the industry has to offer. From Borla to MagnaFlow, Flowmaster, Injen and Gibson, we have the power exhausts that will boost your horsepower by 10% or more. You can add an extra 40hp by combining the exhaust system with a performance header from the wide range available. Mercury custom exhaust headers are specially engineered to boost exhaust scavenging and enhance the engine’s ability to breathe. Along with the power increase comes an increase in torque, which will allow you to enjoy greater towing power from your Mercury Comet. There is also better fuel economy, thanks to the engine’s increased ability to burn fuel more efficiently. Because of its proven endurance and reliability, a custom Mercury Comet exhaust system will save you lots of money in the long run.

1 - 15 of 16051 results
show:
sort by:
    • (1 review)
      # sp9307
      Performance Long Tube Header by Flowtech®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Flowtech Exhausts will...
      Mandrel-formed Power Plenum collectors for low backpressureConstructed of .060 cold roll flash mild steel tubing
      $150.95 - $1,035.95
    • (0 reviews)
      # sp9225
      Super Competition Full Length Performance Header by Hooker®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by...
      Tuned-length primary tubes for maximum exhaust scavenging and velocityMandrel-bent tubing for smooth exhaust flow
      +1
      $333.95 - $1,094.95
    • (0 reviews)
      # sp28783
      Tri Y Header by Doug Headers®. Steel SAP Tri-Y Header by Doug's Headers®. Port Shape: SAP. Collector: 3". Primary Tube: 1 3/4 - 2". Pair. 1-3/4" 3". Doug's headers are carefully developed on the vehicles they are intended to fit...
      Designed to boost your vehicle's performanceMade from high-quality materials
      $639.74 - $809.96
    • (0 reviews)
      # sp17204
      Tight Tuck Street Rod Headers by Patriot Exhaust®. Tight Tuck headers are the solution to many problems associated with engine swaps in modern street rods. Tight Tucks fit in the tightest of engine compartments and clear most stock...
      Expertly crafted from premium materialsQuality design and workmanship
      $188.16 - $495.70
    • (0 reviews)
      # sp14630
      Demolition Derby Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and meticulous attention to...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $136.84
    • (0 reviews)
      # sp14631
      IMCA Modified Headers by Schoenfeld Headers®. Comes in a set. Includes Bolts, Studs, Gaskets. Header made from Steel. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $168.43 - $364.99
    • (0 reviews)
      # sp29086
      Stock Clip Crossover Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and meticulous attention to...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $292.45 - $311.95
    • (0 reviews)
      # sp29087
      Stock Clip Headers by Schoenfeld Headers®. This top-notch product by Schoenfeld Headers is made to give that extra boost that every driver appreciates. This product is designed with utmost care and meticulous attention to detail to...
      Engineered to enhance your vehicle's performanceMade to stringent quality standards
      $200.02 - $364.99
    • (0 reviews)
      # sp23434
      Standard Duty Headers by Hedman Hedders®. After more than 50 years of manufacturing headers using mild steel materials, Hedman Hedders, announces the introduction of performance headers manufactured using Type 304 stainless steel...
      Made of High Quality 304 SSBuilt to Last
      $174.05 - $1,206.23
    • (0 reviews)
      # sp16177
      Elite Ultra-Duty Street Headers by Hedman Hedders®. Hedman's ELITE Hedders are the best you can buy. They have thicker flanges. stronger wall tubing and a thermal coating that withstand full-throttle thrashing and torturous towing.
      Made of High Quality MaterialsIdeal for Heavy Duty Applications
      $388.85 - $731.52
    • (0 reviews)
      # sp16184
      Standard Duty HTC Coated Headers by Hedman Hedders®. The standard-duty Hedman Hedders come from the factory with an extremely durable, protective ceramic-metallic coating. Hedman Hedders, pioneered the use of ceramic-metallic...
      Made of High Quality MaterialsBuilt to Last
      $174.05 - $1,206.23
    • (5 reviews)
      # sp61427
      Round Rolled Edge Angle Cut Exhaust Tip by Go Rhino®. Finish off your truck style with Go Rhino Exhaust Tips. With constant heating and cooling and exposure to winter road treatments, standard polished stainless steel exhaust tips...
      Easy Clamp-On installation; no cutting, drilling or weldingSatinless Steel Torca AccuSeal™ clamp included
      $22.67 - $55.05
    • (0 reviews)
      # sp35467
      Exhaust Flame Thrower Kit by AutoLoc®. The exhaust flame thrower kit is a must have for all hot rods. This kit can make up to 20’ flames shoot out your exhaust on command.
      Shoot Up to 20' of FlamesRemote activation button
      $94.99 - $189.05
    • (0 reviews)
      # sp20676
      Aluminum Header Gasket Set by Flowtech®. Includes 1 Pair Head Flange Gaskets, 1 Pair Exhaust Collector Gaskets. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art...
      Engineered for a precise, easy fitManufactured of P73 Ferroglass non-asbestos facing material for long life
      $10.29 - $14.42
    • (0 reviews)
      # sp9312
      Real-Seal™ Aluminum Header Gasket by Flowtech®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by Flowtech...
      Multi-Layer “Dead Soft” aluminum conforms to create a leak-proof sealWill not burn or blow out
      $46.77 - $54.05




    Guides & Articles

    • Performance Exhaust Systems
      Here's A 'Tip': Exhaust Tips Are An Easy Way To Dress Up Your Tailpipe
      Performance exhaust systems give you improvements in power output, sound levels, and appearance, all in one package. But let's face it: not everyone has the spare change to buy and bolt up one of these kits. So you soldier on with what you have. And that may be a tired-looking exhaust system that is still functional. You've spent all day washing and waxing the vehicle's paint and chrome to perfection, but no degree of elbow grease will make that tailpipe look better.
      May 17, 2016
    • Performance Exhaust Systems
      Are Headers Worth The Performance Improvement?
      Engines have often been compared to air pumps, because the engine that’s most efficient in terms of economy and power is the one that can get air in and out of its cylinders the easiest. That’s why most performance modifications like conical air filters, cold air intake systems, headers, and cat-back exhaust systems are aimed at making the intake and exhaust systems less restrictive. These parts increase the flow of air into the engine and ease the flow of exhaust gas out of the engine. Among these components, headers may be the most difficult to install. In this article, we’ll discuss what headers do, their different types, and how much performance they can add to your car.
      August 18, 2015
    • Performance Exhaust Systems
      Are X-pipes and H-pipes Better Than Straight Pipes on Dual Exhaust Systems?
      You may be wondering why so many aftermarket performance exhaust system manufacturers are offering dual exhaust systems connected by "H-pipe" or "X-pipe" sections. After all, aren't two separate pipes, or so-called "true duals", the best for performance? The answer is no, but to understand why we have to examine how a typical internal combustion engine works.
      August 18, 2015
    • Performance Exhaust Systems
      Power, Sound, Looks | Can I Have It All With a Cat-Back Exhaust System?
      It's an age-old question that many have asked. Will an aftermarket exhaust be worth the expense? While they definitely can be, an important question to ask yourself is do you care more about the deeper sound they’re designed to produce, or the added performance gained from being less restrictive? As car enthusiasts, we’ve become accustomed to associating the sound of a car with its exhaust. After all, doesn’t everyone have a childhood memory or two of a car and the particular sound it made?
      August 17, 2015
    • Bed Accessories
      Pickup Truck Cab And Bed Sizes Are Important When Selecting Accessories
      Americans love to have choices. Buying a dress shirt? Decide solid or stripe, short or long sleeve, cotton or poly blend, button or spread collar, regular fit, slim fit, or big & tall. How about a meal at your favorite steak house? Will it be porterhouse, T-bone, or sirloin? Cooked rare, medium-rare, or medium? With baked, mashed, or French fried potatoes? Thirsty for a fancy cup of coffee? Let's not even get started on options that let you end up with a "grande caramel macchiato with 1% low-fat milk, 2 Splendas, and an extra espresso shot".
      April 17, 2015
    • Replacement Exhaust Parts
      Direct Fit vs. Universal Mufflers
      Regardless of whether you're shopping for a simple replacement muffler that delivers original equipment (OE) sound and performance or an upgraded muffler which provides a deeper growl with increased power through freer exhaust flow, you'll see choices between "direct fit" mufflers and "universal" mufflers. In this article, we'll help you understand the differences between these two styles so you can make a more informed purchase.
      August 01, 2014

    Popular Products

    Mercury Comet Performance Exhaust Systems Reviews

    Average rating:  4.5  4.5 - 39 reviews
    5 of 5
    CanAmMex® 00747-212 - Thunderbolt™ Hi-Polished Single Rolled Angled Oval Tip
    These appear to be of very good quality, good welds.
    JPosted by John (Enfield, CT) / February 24, 2016
    Was this review helpful for you? Yes
    View More
    Related Mercury Comet Pages
    Mercury Comet Models
    SECURE SHOPPING

    All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only.
    It is neither inferred nor implied that any item sold by CARiD.com, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page.