Vehicle Fitment

Dodge

Ram

Specifications

Exhaust System Type	Cat-Back
Exhaust Tubing Material	304 SS
Exit Location	Split Rear
Main Tubing Diameter	3" to 2.5"
Exhaust System Sound	Moderate
Finish	Natural
Muffler Quantity	1
Muffler Body Material	Stainless Steel
Muffler Body Finish	Natural
Tip Quantity	2
Tip Finish	Chrome
Tip Material	Stainless Steel
Tip Outlet Diameter	4"
Tip Shape	Round
Tip Cut Type	Straight-Cut
Catalytic Converter(s) Included	No
Exhaust Type	Single in/Dual out
Exit Location	Split rear
Hardware Included	Yes
Intermediate Pipe Diameter (in.)	3.00 in.
Muffler Configuration	Single inlet/Single outlet
Muffler Finish	Natural
Muffler Included	Yes
Muffler Material	304 stainless steel
Muffler Quantity	One
Muffler Style	Turbo
Quantity	Sold as a kit.
Remanufactured	No
System Finish	Natural
System Material	304 stainless steel
System Style	Cat-back
Tailpipe Diameter (in.)	2.50 in.
Tip Color	Polished
Tip Cut	Straight
Tip Edge Style	Rolled edge
Tip Included	Yes
Tip Material	304 stainless steel
Tip Outlet Size (in.)	4.00

Features

Large diameter mandrel-bent tubing
Stainless steel high flow muffler(s)
High quality hardware kits included
Polished chrome stainless steel tip
Factory style hangers
Increased hp/tq and improved throttle response
Powerful exhaust tone, greatest flow / durability
No extra parts needed
Won’t discolor, enhances vehicle appearance
Easy installation

Product Details

304 SS Cat-Back Exhaust System with Split Rear Exit by JBA®. Stainless tips for dual cut out bumper. Exhaust System Type: Cat-Back. Exhaust Tubing Material: 304 SS. Main Tubing Diameter: 3" to 2.5". Exhaust System Sound: Moderate. JBA Performance exhaust systems add even more power potential to your car, truck, or SUV. Power, sound, and quality are built into each of these premium systems. JBA’s stainless steel construction, high flow muffler designs, and great looking tips are the perfect compliment to any vehicle. Get a higher level of performance with a JBA performance exhaust system.

When it comes to performance exhaust systems, most people are looking for three things: Power, sound, and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance. One of the first performance upgrades typically made to a vehicle is the addition of a performance exhaust system. While there is a high demand for performance sound the capacity for power in a JBA exhaust system gives JBA the extra edge. Each system is tuned to provide the best possible exhaust tone without being overwhelming from within the vehicle. By replacing the restrictive factory exhaust system with free flowing mandrel-bent stainless tubing and quality performance mufflers, JBA has developed the power, sound, and efficiency desired in a vehicle. Each kit is finished with a polished chrome plated stainless steel tip that resist discoloring, along with high quality hardware and thorough instructions for a simple bolt-on installation.

JBA® - Catalog JBA Authorized Dealer FAQ Warranty About us

Brand:

JBA

Part Number:

30-1537

UPC:

694342554033

Alternate MPN:

301537

Warranty

All JBA headers and exhaust products are guaranteed, to the original purchaser, to be free of defects in materials and workmanship for one year. This warranty covers the replacement or repair of the product only and does not cover the cost of removal and installation, customer applied aftermarket coatings or any discoloration or corrosion of finished surfaces.

Damage or product failure resulting from collision, improper installation, off-road use, road hazards, the use of exhaust insulating wrap or like products or rust occurring after installation, is not covered by the warranty. The warranty extends only to the original purchaser.

Certain uses or occurrences listed below will void this warranty.

Purchaser Assumes Responsibility: JBA expressly disclaims, and the purchaser expressly assumes, responsibility for all labor related costs and any incidental or consequential damages arising from any JBA product installation or failure. JBA’s liability is limited to the purchase price of the product. JBA, at its option, may refund the amount of the purchase to end a warranty claim. Labor charges incurred to install or remove the product are not covered. Damage resulting from incorrect timing, fuel system problems, clogged catalytic converters or backfire is not covered. Charges for the loss of use of vehicle, car rentals, and towing are the responsibility of the customer and are not covered. Cost of customer-applied coatings is not covered. As sound preference is subjective, sound is not warranted. Other than the warranty described herein, JBA products are sold as is. No warranty terms are implied. The terms of this warranty are severable. Any provision voided by state or other applicable law shall not act to enlarge other provisions of this warranty except as expressly required by law. Catalytic converters and other products sold but not manufactured by JBA are subject to the product manufacturer’s warranty only and are not warranted by JBA.

JBA reserves the right to change the price, design, material, or specifications of any product without notice.

The Following Will Void This Warranty: Use of heat-wrap products and/or the use of fuels other than gasoline will void this warranty. Damage caused by improper installation is not covered under this warranty. Damage caused by collision, road hazards, or failure of other components is not covered. Any repair or alteration to a JBA product not performed by JBA or its authorized agents will void this warranty.

JBA cannot assume responsibility for compliance with local law and regulations regarding smog and noise standards. Headers described as “smog legal” are warranted to be C.A.R.B. (California Air Resources Board) exempt or pending exemption approval. This warranty is extended solely to the original purchaser and for the original vehicle on which the product was installed.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(5)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

1-5 of 5 Reviews

Sort by

5 of 5

Five Stars

Great looking part at a good price. Assembling took 2 hours i installed it myself. Overall i'm happy with this exhaust and sound.

Posted by Aaron (Orleans, ON) / February 22, 20172014 GMC Sierra

5 of 5

2017 GT

Very good. Elegant Tone for v6.

JBA® - Stainless Steel Axle-Back Exhaust System with Split Rear Exit

Posted by Aydin (Baku) / March 28, 20212017 Dodge Durango

4 of 5

JBA Exhaust

The vehicle sounds louder, yes, but is not "aggressive" as advertised.

JBA® - Stainless Steel Axle-Back Exhaust System with Split Rear Exit

Posted by Clayton (Aguanga, CA) / January 19, 20202015 Dodge Durango

5 of 5

JBA

I love the way the exhaust looks and the way it feels when you drive but it’s definitely not as loud as I was expecting, sounds similar to stock but I’m not complaining.

JBA® 40-9012 - Stainless Steel Cat-Back Exhaust System with Single Side Exit

Posted by Ethan (Castle Rock, CO) / June 28, 20191999 Toyota Tacoma

1 of 5

Exhaust

This product is a universal exhaust and is extremely loud with drone! If u looking for exhaust for Durango stick with Corsa.

JBA® - Stainless Steel Axle-Back Exhaust System with Split Rear Exit

Posted by Ricardo (Middletown, NY) / September 08, 20182011 Dodge Durango

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

JBA® 30-1537 - 304 SS Cat-Back Exhaust System with Split Rear Exit

Vehicle Fitment

Specifications

Features

Product Details

Reviews

Questions and Answers