Ironman 4x4® - Axle Track Bar Bracket

Axle Track Bar Bracket by Ironman 4x4®. Quantity: 1 per Pack. This bracket has been designed with most over the knuckle and WJ knuckle conversions in mind. Its purpose is to raise the track bar geometry back inline with the drag link while keeping the track bar as long as possible. Simply cut off the face of the xj,tj,xj,mj, or LJ lower track bar mount on the axle and bolt this up inside to align desired location and weld the entirety of the bracket to the axle. Made from 3/16" thick A50 steel and a proper width bolt and spacer is included for internal rigidity. Always use this bolt in one unused hole. Four hole settings allow for great adjustment options depending on where your OTK steering kit sits. Paired with OTK frame side track bar bracket and track bar. This allows an OTK track bar system that can be as little as only 1" shorter than the OE dimensions.

Features

• Friendly service for offroad customers by offroad enthusiasts
• Best quality of parts for the best customers on the planet
• Made to serve you for years
• Made 100% in the USA

Ironman 4x4® provide great value for money solutions for all sectors within the 4×4 industry, with a versatile and forward thinking approach, whether it be recreational, military or commercial use we at Ironman 4×4 can safely say that you are using world class products. Ironman 4x4Fab are a small operation with very little overhead and operational expenses. This is possible because they have a small fabrication team and hire part-time help only when a large group of orders arrive. Product inventory is kept to a minimum and raw materials are ordered as necessary. These reductions in operational expenses allow Ironman to produce the best quality of parts for the money on the planet.