Hooker® - Exhaust Headers Hooker® - Exhaust Headers Hooker® - Exhaust Headers Hooker® - Exhaust Headers Hooker® - Exhaust Headers

Hooker® - Exhaust Headers Hooker® - Exhaust Headers Hooker® - Exhaust Headers Hooker® - Exhaust Headers Hooker® - Exhaust Headers Hooker® - Exhaust Headers Hooker® - Exhaust Headers

Hooker® 2105HKR - Steel Black Painted Long Tube Exhaust Headers

0 reviews|Item # mpn5234961394

Vehicle SpecificCannot Confirm Fitment

We need more information

Confirm Fitment

Notes:

This is a Race Only product that is to be used solely for competition. It cannot be used on vehicles that are operated on public streets, roads or highways. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. Shipping Restriction: CA, NY, ME.

Authorized Dealer

$999.95

In Stock (21) - Ships in 24 to 48 hrs

Vehicle Fitment

Buick

Chevy

Oldsmobile

Pontiac

Specifications

Header Material	Steel
Finish	Black Painted
Header Style	Long Tube
Primary Diameter	1.75"
Collector Diameter	3"
Collector Length	10"
Inlet Port Shape	Square
Port shape	Square

Features

This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles
Long tube geometry designed for maximum ground clearance and optimized engine compartment fitment.
0.375” laser cut flanges, TIG welded and flat finished for maximum strength and a leak free seal.
O2 bungs included for compatibility with EFI systems or air/fuel ratio meters (plugs also included).
Raw 304 stainless steel construction
3” long-taper collectors for smooth exhaust flow transition from the headers to the exhaust system.
Application fits motors with standard port heads.
Compatible with straight and angle plug heads.
Compatible with all stock manual and power steering boxes.
Compatible with GM 152 and 168 tooth starters.
Compatible with stock A/C evaporator case.
Compatible with stock floor shift automatic and manual transmissions. Column shift automatics require the use of Lokar, or similar, aftermarket shift linkage.
Compatible with Ridetech Tru-Turn steering system.
Compatible with aftermarket large sump oil pans.
Bolt-in installation capability with new Hooker 2.5” and 3” exhaust systems for these applications, with available adapters.
Constructed with slip-fit collector for maximum ground clearance

Product Details

Steel Black Painted Long Tube Exhaust Headers (2105HKR) by Hooker®. Primary Tubing Diameter: 1.75". Collector Outlet Diameter: 3". Collector Length: 10". Color: Black. Header Coating: Painted. Header Style: Long Tube. All necessary hardware included for a complete installation. Hooker Headers announces the release of their new long tube header. These headers bring modern features and fitment to these classic platforms. Application fits motors with standard port heads.

Installation

Hooker® - Exhaust Headers Installation Instructions

Hooker is here with excellent products that are available at a competitive price. The company does its utmost to provide the best possible solutions for your needs. All products by Hooker are made with expert care and created by professionals to meet all your requirements. Hooker does not accept compromises when it is going about quality, so you can be sure that all products have only first-rate quality. With many years of manufacturing experience, Hooker is the name you can trust.

T hese headers are designed to fit engines in the factory location using any of the OE matched engine frame stand/mount assemblies; not for use with mixed frame stand/mount assemblies (i.e. low performance mounts on high performance frame stands). Please ensure engine mounts and frame stands are correctly matched and are in good condition. Not compatible with stock manual transmission reverse lock-out linkage, aftermarket/custom linkage or cable drive set-up required to maintain mechanism operation.

Racing Vehicles are vehicles that are used exclusively for racing or other forms of competition that are not registered and that may never be used on the street.

Hooker® - Exhaust Headers Installation Instructions Hooker Authorized Dealer FAQ Warranty About us

Brand:

Hooker

Part Number:

2105HKR

UPC:

090127688113

Warranty

All Hooker Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties that extend beyond those stated herein. Hooker Products offers no other warranties expressed or implied beyond this Limited Warranty.

In the event of an alleged defect in material or workmanship, Hooker Products’ responsibility is strictly limited to repair or replace the defective product. Hooker has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Hooker Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential or other damages incurred by use of any product of Hooker Products.

This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements.

Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from the date of purchase.

Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog.

Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!