Name: Goodmark® GMK401188766 - Replacement License Plate Light Lens
Brand: Goodmark
SKU: mpn29011
Price: 9.34 USD
Availability: InStock

Vehicle Fitment

Buick

Chevy

Oldsmobile

Pontiac

Features

Faithful reproduction of the original part
Designed and manufactured using modern tooling
The same dimensions as the original factory replacement part

Product Details

Replacement License Plate Light Lens by Goodmark®. Light up your road companion’s rear end with these top-notch tail lights to keep other motorists off it. Bright bulbs resting inside durable impact-resistant housings will provide effective illumination for superior nighttime visibility. These visually appealing lights look great and make driving safe, no matter where you travel.

Set high-quality lighting to the road behind you with these premium tail lights that offer the ultimate combination of visually appealing design and superior technology. Constructed from the finest materials, these exceptional quality lights come with efficient bulbs wrapped in durable housings that can handle the rigors of everyday driving. These lights are designed to provide you with top-notch illumination and reliable service mile after mile. They produce a bright beam of light that makes seeing your automobile in traffic and on the road easy, ensuring that other drivers get you noticed so that they can keep safe distance. Designed with quality and precision in mind, these tail lights deliver continuous performance without flickering or dimming. Swap out your factory lights with a set of these high-grade tail lights that are sure to back you up with safety, no matter whether you’re riding at night or in brutal weather.

Goodmark® - Catalog Goodmark Authorized Dealer Manufacturing About us

Brand:

Goodmark

Part Number:

GMK401188766

UPC:

615343781990

OE Numbers:

401188766, 4011-887-66, B01AYAU4GA, 11747651, GMK-4011-887-66

Warranty

Goodmark warrants its parts to the original purchaser, to be free from defects in manufacturing and materials for a period of 120 days from the original date of purchase. Goodmark also will require pictures of the defect prior to a claim being filed. Liability of Goodmark under this warranty is limited to the replacement of the defective part or a refund of the purchase price of the product. Goodmark hereby disclaims all other warranties, whether expressed or implied, including but not limited to all warranties of merchantability and fitness for a particular purpose. Goodmark is not responsible for damage caused by abuse, incorrect installation, modification, shipping, accidents or normal wear; nor is Goodmark responsible for labor charges, inconvenience or other expenses related to installation or use of Company products.

Goodmark Sheet Metal FYI Due to the nature of the material and production, the sheet metal products you receive may have scratches, dings, small dents and other minor imperfections which are considered normal. These imperfections will easily be corrected during the initial filling, priming and sanding of your repair or restoration. Goodmark does not consider dings, minor dents, scratches in the EDP primer or any other minor imperfection to be defective or damaged. ALL sheet metal panels will require some preparation and manipulation during the installation process for a show quality fit and finish. Goodmark recommends that all sheet metal panels should be test fit before any prep work or paint is applied. Minor modifications such as elongating mounting holes, adding shims, etc, are normal and may be necessary when you are installing the product.

A few key facts to note are: Some driving conditions such as racing can put added stress on a vehicle's frame causing it to twist out of the factory's original tolerance specs. Poorly performed body work from a previous collision or restoration can cause problems with the body structure to which the panels are attached. A vehicle that has been sitting motionless, collecting rust, etc. for years may have developed a slumping frame, especially a sub framed car, which can cause fitment issues when installing new sheet metal products such as floor pans, fenders, doors and quarter panels.

The above mentioned situations are just a few key examples that can cause sheet metal panels to be misaligned during a repair or restoration. One other fact to consider is the tolerances on a classic vehicle were not nearly as exact as they are on today's modern vehicles. The primary reason is the assembly of most vintage or classic cars was performed by hand, not by the robotics that are used in today's modernized facilities. Because of this, the mounting points and bolt-holes were unique to each vehicle. Due to the above procedures performed in the past there really is no such thing as a direct, "bolt on" body panel when it comes to older vehicles. Goodmark recommends that you hire a licensed professional that possesses the proper tools, knowledge, skills and experience necessary to install the new panels on your vehicle. A professional can anticipate or repair any imperfections your panels may have prior to installation.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!