Gibson® - Stainless Steel Rectangular Angle Cut Bolt-On Single-Wall Exhaust Tip

35 reviews|Item # 2080721
Universal Fit
Fitment notes:
  • Not Vehicle Specific
Notes:
  • To ensure precise fit, please check exhaust tip shape, length and inlet diameter: the latter should match your exhaust pipe diameter.
Authorized Dealer
$92.15 - $138.56
Availability Varies - Depends on Product Options
See similar products
Have a Question? Ask a Specialist
888-577-6964Live Chat

Features

  • Made from the finest T304 Stainless Steel
  • Highly polished finish
  • Exhaust tip inlet is offset to the side
  • Won’t chip, flake or rust
  • Clampless connection design for an easy bolt-on installation
  • No welding required
  • Proudly made in the USA

Product Details

Universal Stainless Steel Rectangular Angle Cut Single-Wall Exhaust Tip by Gibson®. Tip Shape: Rectangular. Tip Cut Type: Angle Cut. Tip Outlet Size: 2.75" H x 6" W. Tip Length: 9.5". Tip Attachment Style: Bolt-On. The tip is the only visible part of the exhaust system, so it’s no place to skimp. Express your style with these custom rectangular sport tips from Gibson. The inlet is offset to the side on each tip, to facilitate left and right side installation. The highly polished finish will complement your vehicle’s appearance and the T304 stainless steel construction will ensure the tip stays looking great.

A Gibson exhaust tip is the finishing touch on a Gibson exhaust system, but a Gibson tip can also be used to finish off any exhaust pipe. The exhaust tip inlet is offset to the side on these rectangular sport tips, to facilitate left and right side installation. The highly polished gleam will stand out and the clampless design makes for a clean, bolt-on installation with no unsightly clamp or welding required. With T304 stainless steel construction, this exhaust tip won’t chip, flake or rust.

Gibson® - CatalogGibson® - FAQGibson® - WarrantyMade In USAGibson Authorized DealerBenefitsAbout us
Brand:
Gibson
Part Number:
500365-B500429500365500432-B500432500366-B500430500366

Reviews

(35)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
/5
1-10 of 35 Reviews
4 of 5
Made with Very Good Quality Steel
It didn't fit tight enough. I measured before I ordered but it was still too loose to be able to tighten with the bolt that was attached. I had to drill a hole so that it could put a screw it and the tailpipe. Because the steel was so hard it wasn't easy drilling through the stainless steel exhaust tip. But once it was on it looks great!
Posted by John (Mountain Top, PA) / May 10, 2019
5 of 5
Satisfied
Good quality product. I will be ordering again soon!
Posted by Mareial (Irving, TX) / July 27, 2017
5 of 5
Easy To Install, And They Look Great
I bought these tips to replace the resonator tips on my piped 2010 GMC Sierra. They were super easy to install, just slide right over the existing 2.5" pipe and bolt on. They give the truck a nice crackle, and look great under my bumper. I would definitely buy these again.
Posted by Austin (Cazenovia, NY) / July 22, 2017
4 of 5
Not Easy To Install
Install not easy.
Posted by Charles (Nashvile, MI) / June 09, 2017
4 of 5
Nice but a Tight Fit on Passenger Side
The passenger side where you cut, if you have the resonator welds and they aren’t smooth trying to fit the pipe on is snug. Gunna try to grind the welds smooth so the pipes slide together better. It’s on a 2021 Chevy Silverado 1500 LT Trailboss
Posted by Joe (Staten Island, NY) / June 04, 20262021 Chevy Silverado 1500
5 of 5
Way Better Than Stock Set Up!
I got these for my 2025 GMC Sierra 1500 Denali Ultimate. If you look at the new Sierra's, the chrome piece is just a facade. There is just a raw exhaust pipe basically aimed at what looks like an exhaust tip. It is not an exhaust tip. I installed these myself buying an exhaust cutter wrench on Amazon for about 30 bucks. The installation part is easy. Getting that fake "stock" tip off was the hardest part. 2 of the bolts are basically in between an immovable frame piece. You will need a right-angle electric/pneumatic wrench with an extended tip to get those out. Once they are out, the rest was easy. To get to those little 10mm bolts (3 total), you will need to remove the corner bumper steps. Here are a couple of photos with 1 of the Gibson tips installed to see the stock "tip" in comparison and then a second photo with both tips installed. Makes the back of the truck look way meaner and has a much deeper tone. I also had the exhaust calibration on the truck done. So that combined with these tips, makes the truck sound way better (6.2L V8). If you don't get a whole catback system, get these tips, you won't be disappointed!
Posted by Terry (Hillsboro, OR) / July 09, 20252025 GMC Sierra 1500
5 of 5
Gibson 6” Diameter 19” Long Tip
Excellent quality coating and one of the very few tips with these dimensions. 3.5” inlet and 6” outlet. Very satisfied. You get what you pay for!
Posted by Matthew (Kansas City, MO) / August 06, 2019
5 of 5
Very Happy!
Love everything about it! Had a problem with shipping my only complaint but they responded well and sorted it out!
Gibson® 71-1017 - Patriot Series™ 304 SS Round Rolled Edge Angle Cut Clamp-On Black Ceramic Exhaust Tip (4" Inlet, 5" Outlet, 12" Length)
Posted by Zachery (Brewster, WA) / August 01, 2019
5 of 5
Great Selection
The muffler looks and sounds awesome on my restored 2000 Jeep XJ! CARiD shipped fast and the installation was easy. I spot welded it after securing it to ensure I don't loose it offroading. Looks great! I couldn't be happier with it.
Gibson® 61-1046 - Metal Mulisha™ Stainless Steel Round Rolled Edge Angle Cut Bolt-On Single-Wall Black Ceramic Exhaust Tip (2.25"-2.5" Inlet, 5" Outlet, 12" Length)
Posted by James (Lake City, MI) / April 10, 2019
5 of 5
One Bada** Exhaust Tip.
This exhaust tip is by far the baddest exhaust tip on the market. It fits perfectly on my truck, provides a nice style and look. Is easy to clean, excellent quality and has everyone head looking & turning when I am parked are drive by.
Gibson® 61-1048 - Metal Mulisha™ Stainless Steel Round Rolled Edge Angle Cut Bolt-On Single-Wall Black Ceramic Exhaust Tip (2.75"-3" Inlet, 5" Outlet, 12" Length)
Posted by Aron (Baton Rouge, LA) / February 08, 2019