Name: Flowmaster® - Scavenger™ Stainless Steel Bare Dual Y-Pipe Kit
Brand: Flowmaster
SKU: mpn324540245
Price: 358.95 USD
Availability: InStock

Vehicle Fitment

Make	Model	Year
Ford	Mustang	2015-2017

Product Details

Scavenger™ Stainless Steel Bare Dual Y-Pipe Kit by Flowmaster®. Without Catalytic Converter and Heat Shield. These Y-pipe assemblies use Flowmaster's patented D-port technology and can be used with the factory rear muffler sections or with Flowmaster's Axle-back kits. The pipe kits are constructed with 2.25 409S mandrel bent tubing. The pipe system is manufactured in the USA and is covered by Flowmaster's Lifetime Limited Warranty.

Specifications

Series: Scavenger™

Material: Stainless Steel

Finish: Bare

Pipe Inlet Diameter: 2.25"

Pipe Outlet Diameter: 2.25"

Overall Length: 47"

Tube Thickness: 16 Gauge

Attachment Method: Slip-Fit

Mount Type: Yes

Single/Dual: Dual

Heat Shield: No

System Type: Exhaust Accessory

Includes

Part# 86320S - Y-Pipe Assembly. (1 Pcs)
Part# Pk808 - Hardware Pack (1 Pcs)
Part# Tb810S - Adapter Pipes (2 Pcs)
Part# Mc225Bs - 2 1/4” Clamp (4 Pcs)

Features

Improve Exhaust Scavenging by Accelerating the Exhaust Gases
Improve Torque and Throttle Response
Retain Classic Flowmaster Sound
Well Suited to Muscle Car Applications
Made of High Quality Materials

The exhaust gases from an engine carry considerable energy. This energy can be put to use through careful design of the components that make up the exhaust system. Flowmaster has put a lot of R&D-efforts into the crucial components where gases from different cylinders join. If these parts of the exhaust system are improperly designed, the exhaust forces from the different cylinders can create uncontrolled turbulence that robs the engine of torque and power. Flowmaster’s patented D-port design ensures that the force in the exhaust pulses is properly used to improve scavenging. With the D-port design, the exhaust pulses mainly stay in the same pipe, with the D-port acting as an air pump, creating a low-pressure zone in the adjoining pipe. This low-pressure zone pulls the oncoming exhaust pulse in the second pipe out from the engine, and when this pulse passes the D-port, it does the same for the exhaust in the first pipe.

Flowmaster® has its roots in solving the engine noise problems encountered by California racers in the 1980s. In 1983 Flowmaster’s founder, Ray Flugger, created his first patented design of racing silencers, which dampened noise with minimal loss of power. Ray attached handles to ease carrying the square shaped race mufflers through the race pits, and the mufflers became known as the "suitcase mufflers." Today, the innovative Flowmaster mufflers are the result of years of development with top race engine builders, thousands of hours of dyno research and "real-world" on-track testing.

Brand:

Flowmaster

Part Number:

81108

UPC:

700042032051

Alternate MPN:

81108

Installation

Flowmaster® - Scavenger™ Stainless Steel Bare Dual Y-Pipe Kit - Installation Instructions

Warranty

Lifetime Limited Warranty applies to Flowmaster stainless steel mufflers, stainless steel exhaust systems, stainless steel pipes, air intake kits and oiled type filters (except cleaning kits) and other stainless steel exhaust accessories (except exhaust tips).

Three (3) Year Limited Warranty applies to Flowmaster aluminized steel mufflers, aluminized steel exhaust systems, aluminized steel pipes, exhaust tips and other non-race exhaust accessories.

Two (2) Year Limited Warranty applies to Delta Force Dry air intake filter elements.

One (1) Year Limited Warranty applies to Elite Series exhaust headers and electronic components such as Delta Boost modules. Flowmaster, Inc. (“Flowmaster”) extends the following limited warranty to the original purchaser of its mufflers, exhaust systems, pipes, exhaust tips, headers and other non-race accessories (hereafter “products”), excluding catalytic converters sold under the Flowmaster® brand.

This catalytic converter is warranted to be free from defects in materials and workmanship subject to the exclusion and conditions set forth below and subject to the durational limits in this paragraph.

EPA Catalytic Converter Warranty: The stainless steel body and the nipples alone are warranted for 5 years or 50,000 miles, whichever comes first. At the conclusion of the 5 year/50,000 mile or 25,000 mile period, whichever is applicable, all liability under this limited warranty shall terminate.

CARB Catalytic Converter Warranty: This catalytic converter has been designed and manufactured and is warranted to meet California Air Resources Board emission requirements for 50,000 miles. The stainless steel body and the nipples alone are warranted for 5 years or 50,000 miles, whichever comes first. At the conclusion of the 5 year/50,000 miles on stainless steel body and nipples or 50,000 miles on catalyst substrate, whichever is applicable, all liability under this limited warranty shall terminate.

Flowmaster warrants the products mentioned above against defects in materials and workmanship for the period set forth below, when they are owned by the original purchaser and remain installed on the vehicle on which they were originally installed. This warranty is void if the product was not installed properly on the vehicle, was installed on a vehicle for which it was not designed, or was removed from the vehicle on which it was originally installed and reinstalled on another vehicle. This warranty shall not apply to normal wear, cosmetic issues such as coatings and material discoloration, any product that was installed on a racing vehicle, installed improperly or contrary to Flowmaster instructions, altered, misused, repaired, damaged from an accident, collision, undercarriage road impact or debris, or willful or negligent act.

The warranty set forth herein for Flowmaster® stainless steel mufflers, stainless steel exhaust systems, stainless steel pipes and other stainless steel exhaust accessories (except exhaust tips) extends for a period of the life of the original vehicle the product was installed on. The warranty set forth herein for Flowmaster aluminized steel mufflers, aluminized steel exhaust systems, aluminized steel pipes, all exhaust tips and non-race exhaust accessories and commercial applications of aluminized steel products or stainless steel products extends for a period of three (3) years from the date of original purchase and the original vehicle it was installed on. The warranty set forth herein for Flowmaster exhaust headers extends for a period of one (1) year from the date of original purchase and the original vehicle it was installed on. Header warranty does not cover damages caused by exhaust insulating wrap, and is void if the product was installed on a new or rebuilt engine during the initial break-in period.

Flowmaster’s liability is expressly limited to the replacement of the product or refund of the purchase price as described herein. In no event shall Flowmaster be liable for any direct, indirect, special, incidental or consequential losses and/or damages, including but not limited to interruption of business or loss of business or loss of profit or damage to related components resulting from the use of or inability to use the product, or any breach of warranty or any defect in the product, even if Flowmaster shall have been advised of the possibility of such potential losses or damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights. You may also have other rights which may vary from state to state.

The warranties set forth herein are exclusive and unless otherwise required by applicable law no other warranties are made by Flowmaster® or are authorized to be made with respect to the product.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Flowmaster® - Scavenger™ Stainless Steel Bare Dual Y-Pipe Kit

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!