DynoMax® 54778 - Ultra Flo™ Welded Stainless Steel Passenger Side Oval Gray Exhaust Muffler

8 reviews|Item # mpn2197026
Vehicle Specific
    Select Vehicle
    Notes:
    • Passenger side only.
    Authorized Dealer
    $258.74 + Save an extra $12.70
    In Stock (1)
    See similar products
    Have a Question? Ask a Specialist
    888-577-6964Live Chat

    Vehicle Fitment

    Jeep

    Specifications

    Location
    Passenger Side
    Muffler Series
    Ultra Flo™ Welded
    Inlet - Outlet Configuration
    Offset Inlet - Offset Outlet
    Muffler Body Material
    Stainless Steel
    Muffler Body Finish
    Gray
    Muffler Inlet Diameter
    2.5"
    Muffler Outlet Diameter
    3"
    Muffler Body Height
    4.5"
    Inlet Connection Type
    Pipe
    Outlet Connection Type
    Tip - Welded Spout
    Muffler Body Width
    9.75"
    Muffler Body Shape
    Oval
    Muffler Body Length
    10"
    Muffler Overall Length
    40"
    Muffler Reversible
    No
    Muffler Sound
    Moderate
    Muffler Type
    Absorption
    Tips Included
    Yes
    Case Exterior Length (in.)
    10.00 in.
    Case Shape
    Oval
    Inlet Diameter (in.)
    2.50 in.
    Inlet Location
    Offset
    Inlet Quantity
    1
    Internal Construction
    Glass-wrap perforated tube
    Muffler Finish
    Natural
    Muffler Material
    409 stainless steel
    Outlet Diameter (in.)
    3.00 in.
    Outlet Location
    Offset
    Outlet Quantity
    1
    Quantity
    Sold individually.
    Remanufactured
    No
    Reversible
    Yes
    Width (in.)
    9.750 in.

    Features

    • Stainless steel construction for lifelong protection
    • 100% welded design for maximum durability
    • Straight through design ensures unrestricted exhaust flow and reduces back pressure
    • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
    • Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower

    Product Details

    Ultra Flo™ Welded Stainless Steel Passenger Side Oval Gray Exhaust Muffler (54778) by DynoMax®. Muffler Inlet Diameter: 2.5". Muffler Outlet Diameter: 3". Muffler Body Length: 10". Muffler Overall Length: 40". Muffler Sound: Moderate. Muffler Configuration: Offset - Offset. This muffler features straight-through design for unrestricted exhaust flow and a dyno-proven increase in power. It maintains a deep throaty tone while absorbing undesirable interior resonance.

    The Ultra Flo Welded performance muffler will give your car a powerful throaty tone while providing effective dampening of unwanted interior resonance thanks to CRF (Continuous Roving Fiberglass) technology. Its 100% welded stainless steel construction forms a basis for maximum durability and lifelong protection. The exterior of the muffler is cleaned using “Micro finish” technology that ensures a blemish free, satin finish. The muffler's straight-through design with a continuous perforated pipe inside allows for proper sound absorption while ensuring the free flow of exhaust gases and reduced back pressure. Improved, unrestricted flow is one of the most important factors in gaining horsepower and torque. The Ultra Flo Welded muffler is covered by a limited lifetime warranty and 90-day Performance & Sound Guarantee to make sure it fully meets your expectations.

    DynoMax® - Exhaust TypesDynoMax® - WarrantyMade In USADynomax Authorized DealerProduct linesFAQAbout us
    Brand:
    Dynomax
    Part Number:
    54778
    UPC:
    086387547789

    Reviews

    (8)
    Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
    /5
    1-8 of 8 Reviews
    3 of 5
    No Show Piece, but a Good Value
    Looking to replace the exhaust system on my 1999 Dodge Dakota, RWD 3.9L Magnum V6, and wanted something a little more free flowing than stock. Did some research, and found this offering from Dynomax. Wanted stainless steel, and welded seams were a plus. Price was fair as well. Got the item fairly quickly. Inspected the muffler out of the box, no damage, but this ain't show piece. Welds are extremely sloppy, so either the robot on the line was off that day, or these are apprentice welds. End cuts for the inlet and outlets were pretty rough as well. I don't much care about appearance, so long as the thing is sealed. I gave it 2 stars for appearance in case you're looking for something nice. For a universal fitment muffler, this was a no fuss install for my truck. Good bang for your buck, if appearance isn't important. Sounds good at idle, a little raspy on acceleration, and an obvious drone at 2500-3000 RPM on acceleration. I can deal with it. Overall, I'm satisfied.
    Posted by Christopher (Rahway, NJ) / May 28, 20181999 Dodge Dakota
    5 of 5
    Great Noise
    I' ve put it with cold air intake and it just gives you a full power and sounds gooood.
    Posted by Omar (Abu Dhabi, AA) / January 28, 20162010 Nissan Xterra
    5 of 5
    Improved Performance
    The product arrived just in time, I installed it on my car and it gained a surprising amount of horsepower. Great product, reasonable price, and fast shipping. Thanks!
    Posted by Doug (Montgomery, NY) / March 08, 20142009 Chevy Colorado
    5 of 5
    Mellow Sound for 2014 Toyota Tacoma V6.
    The '14 V6 Tacoma comes with an offset to offset muffler. The Dynomax Turbo is not available in that design. I bought the offset to center model. Since it is reversible, I figured the muffler shop would be able to install it. They did have to add one section of pipe to make everything fit and install new hangers. The muffler cost about $70 and the install was $125. I was hoping he'd charge only $100. Nevertheless, that was still a lot lower than the $250 estimate had I bought the Magnaflow muffler from the muffler installer. The Dynomax Turbo is just a little louder than factory; the exhaust sound at road-speed is pleasant. It is not the "ratty" sound you hear from single or dual exhaust V6's. I will add that my old '94 V6 4.0 liter Ford Ranger sounds a heck of a lot better with just the factory exhaust. I suppose that has something to do with OHV engines compared to OHC. OHV delivers more "lope" sound. However, after 22 years in the Ranger, it was time for something new. Besides, the 156 hp of the ranger does not compare to the 236 hp of the Tacoma. Same size engine, but 22 years of tech change equals more right-foot excitement.
    Posted by Nathan (Greensboro, NC) / December 14, 20162014 Toyota Tacoma
    4 of 5
    Dyno Muffler
    Great muffler. I had to do some welding and modification to the tail pipe in order to fit (expanding the ends and cutting of the tail pipe), but once attached it seems to work great.
    Posted by Carl (La Mirada, CA) / October 23, 20161995 Jeep Cherokee
    5 of 5
    Super
    I like it easy to install and gives my Jeep Liberty a nice deep tone and little bit more power.
    Posted by Willy (Mac Arthur, WV) / August 23, 20162007 Jeep Liberty
    5 of 5
    Okay
    Well made, has a good sound tone quality, pipe connections were oversized but was able to adapt. otherwise a perfect fit.
    Posted by Carl (Enfield, CT) / July 02, 20142001 Pontiac Grand Prix
    5 of 5
    Polished Muffler
    Instead of my stock one I installed this muffler and now it sounds much more aggressive. It is expensive a little, but quality is well worth it.
    Posted by Adam (St Paul, MN) / March 12, 20141994 Chevy CK Pickup

    Questions and Answers

    (0)
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!