The Ultra Flo is a straight through internal design and will have a deep throaty tone, while the Super Turbo has a 3 tubed internal design and will have a deep mellower tone that is quieter than the Ultra Flo.
The Flowmaster has a higher pitched frequency while Dynomax has a lower toned frequency.
No. A cat back kit is any or all of the components behind the factory converter.
Yes. The Bullet Race muffler works very well as a resonator as it will not restrict the flow, but will slightly lower the dB of the system.
A mandrel bent pipe is a smooth pipe without any serrations, for a higher flowing system.
For street applications it is against the law to remove or alter a converter.
DynoMax VT - "Valve Technology" - mufflers feature an exclusive, precisely calibrated internal valve that redirects exhaust flow during cruising conditions to provide Drone-Free Performance™.
When you hammer the gas, the valve automatically opens for maximum exhaust flow, delivering on-demand performance and a deep, throaty drone-free sound.
The valve spring is constructed from a corrosion and heat resistant superalloy that is guaranteed to last the life of your vehicle. The high temperature properties of this material have exceeded extreme environmental testing with over 2,000,000 cycles.
DynoMax® VT™ mufflers feature a straight-through design that maximizes flow and power.
DynoMax® VT™ mufflers are a universal muffler that can be installed on most vehicles. Please refer to the VT universal chart. You can select the desired muffler design (i.e. offset – center) and bushing size on the configuration chart. Next, determine your exhaust configuration (single or dual) and for single muffler applications, verify your engine size.
The use of a balance tube (h-pipe or x-pipe) between the dual exhaust pipes will increase power and enhance the sound of the exhaust.
No, the inlet side of the muffler is clearly marked in the body of the muffler.
Yes, DynoMax® VT™ mufflers are constructed from 409 stainless steel.
"Micro finish" is a cleaning process that provides a blemish free, satin finish to the exterior of the muffler.