Carbon Creations® 112475 - Hellcat Style Carbon Fiber Hood

Not so happy of the finish of the product, defaults in the carbon fiber and under the hood looks like crap.

The product I installed was for a friend for his birthday. The overall look of the hood is decent it has the look that he wanted. However the quality is not quite there the hood itself looks like the mold was taken from a hail damaged hood, pretty wavy and distorted now I understand carbon fiber is not perfect however this has a lot more flaws that I think should not be there. Now the install the hood is typically easy however the wiper fluid sprayers had to be cut in to the back side of the hood no big deal as long as you have the proper tools. With a little bit of alignment and adjustment was able to center it fairly well with the fenders. Now to my biggest concern, the stiffness of the hood after the first test drive on the highway the hood lifted a good 3/4 to 1 inch off the body of the car. Once air travels inside the scoop the hood itself flexes and air catches underneath the corners and raises the hood. With that being said long drives flex the corners of the hood and distort them where they stand off the body. Had to lower the striker or the latch by wallowing out the holes to help the hood set lower inside the bumper however this did not work once air travels through the front cowl of the hood. The fix we did on our end was add hood pins to the corners to help keep the hood from raising and flexing. Now I'm not trying to bash the hood it had the look and style the customer wanted, however take into consideration the hood is very thin, and has a lot of movement under medium speeds.

Figment was good. Had to remove hood shocks as hood could not take pressure from shocks. Had to purchase a prop to install so hood could be left open. Wire mesh was very cheaply done so purchased hellcat vent inserts. Reinforce hood with foam between layers.

The product looks great but it doesn't come with the holes drilled for the windshield wiper fluid nor does it come with a splash guard.

Few issues. Faster delivery.

Hood looked great. The hood vents had a cheap aluminum mesh. So went to buy the actually plastic vents that would fit in the scoops but did not fit. They later told me that that’s how it comes. Does not look like the picture given. It looks very cheap. Other than that it looks great. Although fitment is not perfect hood pins will fix it up real nice!

Fits nice and looks amazing on my white Challenger. I recommend getting hood pins and taking your time getting the hood adjusted correctly. The carbon finish is very glossy and looks fantastic.

The hood looks great, it just doesn't fit the way I would like. I will have to make some adjustments.

The product came in good condition, the packaging was well done, and the whole experience was all in all great.

The hood looks good but the fit isn't great. Due to the fit definitely follow the recommendation and install hoodpins to help keep the front of the hood down at speed. One of the metal hood inserts was dented and torn on arrival and on inspection also found to not be held in place. The holders are simple metal holders that you bend and tighten onto the insert.