Vehicle Fitment

Information is not available

Specifications

Emission Code	5
Hex Size	7/16"
Magnetic	Yes
Material	Brass and steel
Thread Size	1/8 NPT
Transmission Type	Automatic

Features

Simplifies Future Filter and Fluid Servicing
Eliminates Messy Fluid Splash and Spills
Universal Fit For Most Pans
Easy & Quick Installation
B&M Quality

Product Details

Hi-Tek™ Transmission Drain Plug by B&M®. Very few automatic transmission pans come with a drain plug from the factory. So servicing your transmission by removing the transmission pan to drain the fluid can be very messy. We've got you covered with our Hi-Tek Universal mount transmission pan drain plug. You remove the pan and drill a 1/2-inch hole, then bolt the B&M Drain Plug Kit into the pan. It's that easy, and you eliminate any future messy oil splashes and spills.Only a few automatic transmissions are equipped with drain plugs from the factory removing the pan to drain the fluid can be a mess. Designed utilizing the latest technology, this product by B&M features premium quality and will perform better than advertised. Perfect for your vehicle and lifestyle, it is manufactured to meet or exceed stringent industry standards.

Racers themselves, B&M’s founders identified the needs of local racers and street performance enthusiasts, and developed products to fill as many needs as possible. All B&M accessories are designed and carefully selected by the most experienced experts. There’s a comprehensive collection of B&M products that are just indispensable in every respect. All units are made with both quality and reliability in mind, and what’s more, they are waiting for you at a price that everyone can afford!

B&M Authorized Dealer Catalog Warranty About us

Brand:

B&M

Part Number:

80250

UPC:

019695802509

Warranty

Lifetime Limited Warranty applies to all B&M shifters, differential covers and cast aluminum pans.

One-Year Limited Warranty applies to B&M coolers, shifter related accessories (knobs, handles, etc.), torque converters, flexplates, dipsticks, stamped steel pans and other transmission related accessories (except racing products).

90-Day Limited Warranty applies to B&M transmissions, launch control kits and all electrical components (switches, lights, solenoids).

B&M Racing & Performance (“B&M”) extends the following limited warranty to the original purchaser of its shifters, pans, coolers, transmissions, components and accessories (hereafter “products”).

B&M warrants the products mentioned above against defects in materials and workmanship for the period set forth below, when they are owned by the original purchaser and remain installed on the vehicle on which they were originally installed. This warranty is void if the product was not installed properly on the vehicle, was installed on a vehicle for which it was not designed, or was removed from the vehicle on which it was originally installed and reinstalled on another vehicle. This warranty shall not apply to normal wear (bushings, springs, etc.), cosmetic issues such as coatings and material discoloration, or any product that was installed on a racing vehicle (excluding shifters), installed contrary to B&M instructions, or altered, misused, repaired, damaged from an accident, collision, undercarriage road impact or debris, or willful or negligent act.

The warranty set forth herein for all B&M shifters, differential covers and cast aluminum pans extends for a period of the life of the original vehicle the product was installed on. The warranty set forth herein for B&M coolers, shifter related accessories (knobs, handles, etc.), torque converters, flexplates, dipsticks, stamped steel pans and other transmission related accessories (except racing products) extends for a period of one year from the date of original purchase and the original vehicle it was installed on. The warranty set forth herein for B&M transmissions, launch control kits and all electrical components (switches, lights, solenoids) extends for a period of 90 days from the date of original purchase and the original vehicle it was installed on.

B&M’s liability is expressly limited to the replacement of the product or refund of the purchase price as described herein. B&M shall have no liability for the cost of installation or removal of the defective product, the cost of labor or any additional parts required to complete the installation of the replacement product. In no event shall B&M be liable for any direct, indirect, special, incidental and/or consequential losses or damages, including but not limited to interruption of business or loss of business or loss of profit or damage to related components resulting from the use of or inability to use the product, or any breach of warranty or any defect in the product, even if B&M shall have been advised of the possibility of such potential losses or damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights. You may also have other rights which may vary from state to state.

The warranties set forth herein are exclusive and unless otherwise required by applicable law, no other warranties are made by B&M or are authorized to be made with respect to the product.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(3)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

1-3 of 3 Reviews

Sort by

4 of 5

Good Quality Pan

It's a good quality pan with nice deep heat sinks , I cannot give it a "5" because the factory drilled and tapped hole for your Temp. gauge will only work with an electronic sensor. The hole is too small for a mechanical gauge which is what I am running ( AutoMeter mechanical Temperature gauge ). Fortunately the pan has a substantial boss around the hole allowing me to drill and tap a larger access hole that my mechanical sensor can pass through . I'm also running an AutoMeter psi gauge but that is teed in between my twin Hayden coolers and the factory trans pressure regulator. So the two extra quarts of fluid the B&M pan provides plus the one extra quart from my twin Hayden coolers , when pushing my 600 HP SRT 392 hard I barely hit 200 degrees and that's with a 2800-3000 rpm stall converter . Normal driving around town the tranny stays at about 170 degrees and this is in 90 degree Florida heat . So I am very happy with my pan/cooler setup.

B&M® 10300 - Transmission Oil Pan

Posted by Christopher (Weirsdale, FL) / September 25, 20202012 Dodge Challenger

5 of 5

AR Pan

Looks great. Excellent service, quick and friendly!

B&M® 70289 - Transmission Oil Pan

Posted by Robert (Bayard, NM) / September 26, 20181985 Chevy Camaro

4 of 5

Great to Have This!

The only place I have found a locking trans dipstick for my Chrysler 300. A little overpriced but great to easily check fluid level for the first time ever! Don't understand the manufacturing decision to not include a dipstick with the car. Very snug pushing in and locking for the first time but better to have a tight fit!

B&M® 22300 - Locking Transmission Dipstick

Posted by Nelson (Dearborn Hieghts, AL) / September 01, 20182008 Chrysler 300

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

B&M® 80250 - Hi-Tek™ Transmission Drain Plug