1998 Ford F-150 Accessories & Parts

This product fits my 1998 F150 4.2L. By mistake I ordered the part for the AT version. However my mechanic was able to fit it into my MT. Excellent part! Now I don't have any leakage.

Good price, good looking and very easy to install.

Looks amazing, easy install.

This tank is not identical to my original tank in dimensions, but is the closest I could find on the market for a: 1998 Ford F-150, 4.6L (4x4); Extended Cab & Step Side Box. Placement of all the holes for pump hanger, vents and vapor pressure sensor were very accurate on this 24.5G tank, for my reinstallation of a new pump hanger and all other fittings topside. Unfortunately, the thin forward portion of my original tank was not included in the design of the F46A, so this replacement tank is slightly deeper to achieve the same volume as the original tank. This created two problems during installation. The 'forward' strap of Spectra's installation kit is about 2 inches too short and requires that the underside of your box cross support rail be shimmed down about 2 inches to create a solid mount, also requiring a longer bolt. Then, I discovered the rock shield, unique to the (4x4) no longer fit correctly due to the increased depth of the F46A tank. This required that I shim all 4 mounting locations down approx 2 inches to maintain proper clearance between the bottom surface of the F46A tank and the rock shield, again using extended bolts to button this job up. Once done thou - it was well worth the extra trouble. The shipping box was broken open during delivery and one of the fuel pump hanger bolts was missing from a free floating, torn plastic bag inside the box (containing new bolts washers and quality hanger assembly seal). I made do, using one of the old bolts. A small thing, but heh. You asked. Overall, I am very pleased with this product. Cheers!

The connections did not match my truck so I had to wire it myself. They were a pain in the butt to aline properly as well. But they look awesome at night!

This 1 is my favorite. Easy install. Remove the 2 coat hooks above the rear window and pull down headliner to access the wiring harness.15 minute job tops. Super Bright LED's! It lights up the whole truck bed.

Replacement for damaged part.

These Rubbertite Custom fit mats were used on my 98 Honda Civic LX. Positives: Great fit and look (tan color) to match the tan interior. Appear to be very durable and easy to wash when needed. Right out of the box were installed with no cutting necessary. The rear mats and front passenger are virtually perfect fit. Negatives: This rubber has a distinct odor which if installed right away in car could change overall aroma. Recommend unpacking and let them sit in your garage for a couple of days to air out. The teeth on bottom of mats could be a little deeper so that the mats hold in place more firmly as the driver side does tend to move at times, but not a dealbreaker. Finally, the driver side mat, although custom cut, could be a little wider so that it meets the side of the kick panel and plate (there's about a 1/4 inch gap exposing the carpeting (but also not a dealbreaker as these custom cut mats are the best I've seen).

Este producto es facil de instalar y se ve bien.