Vicrez® vz101601 - Wicker Bill Hardware Installation Kit

2017 Camaro SS. Saw a ZL1 1LE in person once and knew I needed that spoiler. The install was a headache so you better know what you're doing or get someone who does. 10/10 looks once it was on. Car finally feels like MINE.

The camera hole was not big enough and I had to pay to have it cut. My rear view camera was like looking through a tunnel.

I bought and installed the carbon fiber version last fall (2020), and it sat in the garage until spring. Install was easy and fit is fairly good (the bottom line of the bill does not match the factory deck lid), but I highly recommend you buy some quality brass rivet nuts from your local hardware store, as the supplied steel ones do not compress (and, therefore lock) very well. The size needed is standard, so you should not have any trouble finding rivet nuts. As for the carbon fiber, it is simply a vinyl wrapping over a poly spoiler. Unfortunately the vinyl started to bubble within a week of being out in the elements (no bad weather, as this is a garage queen in the winter). I contacted the manufacturer (for some reason the review will not allow me to use the manufacturer’s name because of its spelling) directly, as this was now out of the return period for this website. After some recommendations on how to try to alleviate the bubbling issue, they gladly replaced the defective product. Overall, I’m quite happy with the product, and happy with the customer service I received from the manufacturer.

Really good strong quality, very easy to install as well. Comes with 8 screws in the kit as well and fits perfectly overall on the 5th Gen Camaro Trunk. Also, worth mentioning that it does require the removal of the factory spoiler for installation.

Perfect fit

I fitted this with no issues on my Charger. But I did find that on the center piece, the edges would sometimes flap around. So I measured and drilled a couple extra holes on either side, now it's fitted lovely. For reference it uses 1/4-20 rivnuts and 1/4" allen hex head bolts, which most hardware stores carry. Gives the car a totally new look, I would recommend this.

Will not stick with 3m molding tape.

The spoiler lip looks original and very impressive. Makes a big improvement on the Z4.

Fits perfectly. Easy to install. Looks insane. Zero complaints. Extremely satisfied.