Timken Alcor Aerospace Technologies, Inc. and Bearing Inspection, Inc., collectively known as Timken Aerospace Aftermarket Solutions (“TAS”), provide the following limited warranties to our customers for manufactured parts and for engine, component, part overhaul and repair services, and bearing overhaul services. FAA-PMA Replacement Parts (“PMA Parts”) will be free from defects in materials and workmanship, as defined by TAS standards, and will conform to the descriptions provided in writing by TAS for a period of 12 months,1000 hours, or the cycle limit of the Part as defined by the applicable engine operations and maintenance manual, whichever occurs first, from date of installation (“Warranty Period”).
The Warranty Period shall commence no later than twelve (12) months from the date of delivery of the Part to our customer. In no event, however shall PMA Parts with a specified shelf life shall be warranted for any period of time longer than the shelf life. The Warranty Period for Parts for Rolls-Royce 250 series and T56 series engines shall be twenty-four (24) months, subject to the same limitations stated herein. Repair Services shall be performed in a workmanlike manner and repairs shall be free from defect in workmanship, as determined by TAS standards of repair, under normal operating conditions for a period of twelve (12) months from the date of shipment or 6 months from the date of first installation or 500 flight hours, whichever comes first (“Repair Service Warranty”). Overhauled and Repaired Parts (“Repaired Parts”) will be free from defects in materials and workmanship, as defined by TAS standards, for a period of twelve (12) months from the date of shipment or six (6) months from the date of installation or 500 flight hours whichever comes first (“Repair Part Warranty”). Vane Casting Replacement Repaired Parts (“Vane Casting Replacements”) will have the same warranty as PMA Parts (“Vane Casting Replacement Repair Warranty”). Bearing Overhaul. Bearings overhauled will be free from defects in material and workmanship, as defined by TAS overhaul standards, for a period of one (1) year from the date of delivery to our customer. Limited Warranty Conditions.
These Limited Warranties are void under the following conditions: Parts or Components must have been installed by a facility approved to perform repair/overhaul of the engine or drivetrain. The installer must have current manufacturer manuals and must have properly trained personnel performing the installations. Installation of Parts or Components must be documented by approved engine assembly documents and work orders providing traceability and date of installation. The engine in which the Part or Component was installed must have been operated within the limitations and guidelines as outlined by the original equipment manufacturer’s manual, or technical data approved by or released by Timken Aftermarket Solutions, or any technical data approved by OEM or FAA other than the existing manuals. The engine must not be modified in any way, except for FAA approved STC or modifications approved by the OEM. The Part or Component must not be modified in any way, unless expressly approved by Timken Aftermarket Solutions. If the engine, PMA Part, or repaired Component has not 2 been maintained and operated in accordance with the original manufacturer’s manuals or other expressly approved written instructions, has been replaced or altered outside of Timken Aftermarket Solutions facilities in any way which may impair its safety, operation, or efficiency and must not have not been subjected to misuse, neglect, accident, or damage by the elements. This limited warranty is void if the PMA Part or repaired Component is subjected to misuse, corrosion, erosion, over-temperature, improper installation, accident, foreign object damage, improper storage, or damage in transit.
This limited warranty does not cover (i) bearings which have been repaired or modified or used in conjunction with third-party equipment not authorized or intended by Timken Aftermarket Solutions, (ii) bearings subjected to unusual physical, thermal, or electrical stress, improper installation, misuse, abuse, accident, or negligence in use, storage, transportation or handling, or (iii) bearings considered consumable items or items requiring repair or replacement due to normal wear and tear (if any).
Timken Aftermarket Solutions must have an opportunity to inspect the any part or component subject to a warranty claim. Notice of warranty claims must be given in writing to Timken Aftermarket Solutions no later than 30 days after malfunction or failure. Limitations of Warranty. These Limited Warranties are provided by Timken Aftermarket Solutions In LIEU of any other warranties, express or implied, including any implied Warranty Of Merchantability or Fitness For a Particular Purpose. The terms contained herein constitute the entire agreement of the parties and warranty representations of Timken Aftermarket Solutions. There are no other representations, warranties, or guarantees applicable to the sale of Timken Aftermarket Solutions products or services unless otherwise expressly agreed to in writing by a duly authorized officer or agent of Timken Aftermarket Solutions. Any warranty terms or conditions set forth on a customer’s purchase order or any other document are expressly rejected by Timken Aftermarket Solutions. Exclusive Remedy/Limitation of Liability. The exclusive remedy for any claimed breach of these limited warranties shall be repair or replacement of the part(s) or correction of the service work performed, at the sole discretion of TAS, plus shipping and handling of replacement parts and direct labor costs for removal and installation only. If repair is Timken Aftermarket Solutions’ choice for corrective action, and customer opts to have new part installed, the cost of repairing the part will be discounted from the current published sell price of a new part. TAS shall not be liable for any consequentia, incidental, or other damages sustained by purchaser, including but not limited to loss of profits or revenue, loss of use of product, cost of capital, cost of substituted product, facilities, services, or claims of purchaser’s customers for any damages. This exclusive remedy applies regardless of the nature of purchaser’s claim, whether in contract, tort, express or implied warranty, negligence, or strictliability, upon which damages are claimed and regardless of whether the same is due to our negligence or any defect in our product or services. Continued Limited Warranty After Remedy. Limited Warranty for part(s) covered continues from the original date of installation of part covered by warranty. The use of a new part at Timken Aftermarket Solutions ‘option does not constitute a new warranty period or extend the warranty for warranted parts. The use of repair option carries the remaining original limited warranty period or repair
agency’s warranty whichever is greater.