Product Details
Universal 3-Point Rallye 3 ASM™ Harness Belt by Schroth®. Made from premium quality materials this part offers extra durability for a long-lasting service life. Designed to be used with Schroth harness. Use this hardware part with other Schroth installation hardware to properly install and adjust your harness belt.
Notes
- FMVSS 209 Approved
- This harness is not compatible with HANS or any other head and neck restraint devices
Features
- Designed with driver's safety in mind
- Expertly crafted from premium materials
- Meets and exceeds strict quality control standards
The Rallye 3 is the choice restraint for anyone who's car will not work with a Rallye 4. This would be the case if your rear seat was too close to the front seats for optimum geometry. In any harness, you absolutely do not want to have a tailstrap that angles down more than 45 degrees from a line parallel to the ground. Past this angle, the shoulder belts will not work the way they are designed to. In some cases, the Rallye 3 will offer the right solution.There are two main reasons why the Schroth Belts are the only safe aftermarket harnesses: ASM technology and the ability to install the belts to stock harness mounting locations.ASM stands for Anti-SubMarining. It's an extra flap of material sewn into the inboard shoulder belt that prevents you from sliding underneath the lap belt. In a 4 point harness made by some other company, the two shoulder straps restrain your upper body equally. They keep your chest from moving forward. However, this also pulls up on the lap belt and allows your accellerating pelvis to slide under the lap belt and cause serious damage to your stomach and intestines. With ASM, one of the shoulder belts will elongate at a different rate which will force your pelvis down into the seat cushion.
Upon rebound, you will be placed back in an upright position with the belt correctly placed over your body.The advantages of being able to mount an aftermarket 4 point harness to stock mounting locations are many. 1st and foremost is the knowledge that these points have been load tested. This means that the manufacturer of your vehicle engineered the points to be able to withstand some truly amazing forces for a specified length of time. In plain English this means that the bolts won't pull out of the sheet metal.It also means (in the case of a Schroth Harness) that you can retain the use of your stock 3-point harness, allowing you the use of the backseat of your car. If you have the need to transport passengers (or cargo) in your backseat, it is possible to disconnect the tailstrap (a feature only Schroth has) and use your normal 3 point harness.
First introduced in 1946, Schroth® became known for delivering high quality safety equipment for a variety of applications including racing, tuning, military and aviation. People at Schroth believe in the slogan "Safety through Technology". Since 1960 Schroth has been conducting various crash tests to increase the performance of its harnesses and meet the increasing safety requirements. Until the present day Schroth is the leader in racing and aviation harnesses. It works with F1, WRC, NASCAR, Dakar Rally and many other world-known racing series. Schroth harnesses and safety belts are the best ones available.