Product Details
Element3™ Brake Rotor by Raybestos®. Open-wheel designs on modern vehicles leave brake parts, particularly rotors, more exposed to the elements. If a rotor is uncoated, corrosion and red rust begin to form immediately. Raybestos® Element3 coated rotors use a propriety finishing technology to coat each rotor's entire surface, including the cooling vanes. The full Grey Fusion 4.0™ coating helps resist corrosion and significantly delays rust-induced performance issues.
Features
- Application Specific Semi-Metallic Formulations: Maximum stopping power and safety; silent braking, low dusting and improved pedal feel
- Application Specific Formulations: Restore factory performance for less noise and a smooth, quiet ride
- Improved Pedal Feel and Responsiveness: Cured so they are primed and ready right out of the box
- Best Overall Coverage: Full coverage for import and domestic applications
- Steel Plate Mechanical Attachment: Unmatched sheer strength; reduces edge lift and prevents rust jacking
- Stamped or Shaved Backing Plate: Permits proper movement; reduced noise, wear and pulsation
- Integrated Abutment Hardware: Included with every abutment clip design; less noise and added service life
- Application Specific Abutment Surfaces: Consistent surface; tighter tolerances reduce noise
- Premium Attached Shims: Unrivaled noise dampening and durability
- Orbital Staked and Spring Lock Attachment: Shims stay in place for the service life of the friction
- Slots and Chamfers Match OE Design: Reduce noise, vibration and harshness; allow escape of brake gasses
- Installation Ready Hardware: Included where required; loose hardware is available as needed
- Electronic Sensors: Included where required; loose sensors is available as needed
Design and Material: Raybestos RPT Rust Prevention Technology™ rotors are developed from OE samples and made with G3000-qualified material, guaranteeing form, fit and function for a dependable performance.
Coating: Raybestos coated rotors are coated on their entire surface with a proprietary full Grey Fusion 4.0™ coating. The rotors are put through 300 plus hours of salt spray testing, which:
- Exceeds the OE requirement for car and truck rotors
- Certifies the coating prevents rust and corrosion
SAE Standard for Tensile Strength: Raybestos rotors meet the SAE standard for tensile strength, providing structural integrity and a maximum service life.
Finish: A non-directional ground finish provides a product that is ready to install right out of the box
Lateral Runout & Thickness Variation: Raybestos coated rotors come with a lateral runout of 0.0004" or less and a thickness variation of less than 0.0005”, ensuring:
- Less pedal pulsation
- Less brake noise
- An extended pad life
Mill Balanced Edges: Raybestos coated rotors are mill balanced and 100 percent validated. This helps minimize the thickness variation on the rotor and leads to:
- Proper balance
- Minimized vibration
- Quieter and smoother stopping
Raybestos® is a manufacturer of brake parts, brake shoes, rotors, drums, calipers, and many other products known for their premium quality, safety, and long lasting service life. The company has been regarded as a leading brand of replacement products since 1902. Raybestos demonstrates its continuous commitment to research and development. Thanks to its advanced technology, the company offers rotors which are the perfect option for noise-prone applications.