RAM Clutches® 98951 - Powergrip Clutch Kit

Vehicle Fitment

Ford

Includes

Throwout Bearing
Alignment Tool

Features

Designed to deliver trouble-free, consistent performance
Right for your vehicle and lifestyle
Made from high-quality materials for ultimate durability
Manufactured to meet or exceed strict quality requirements

Product Details

Powergrip Clutch Kit by RAM Clutches®. Does not Include: Flywheel, Pilot Bushing, Mounting Hardware. Disc Outer Diameter: 11". Input Shaft Spline: 1 1/16" x 10 Teeth. Disc Center Style: 8 Spring Center Hub. Pressure Plate Style: Diaphragm. Disc Material: Feramic / Iron. RAM Powergrip meets the challenge with a combination of organic and metallic disc friction surfaces that effectively increase the clutch capacity level. The 8-spring hub is equipped with RAM Polycoil damper springs encapsulated in polyurethane.

This spring can handle three times the shock load of just the coil spring, and is standard in all RAM competition discs. The RAM Competition pressure plate in this kit provides 30% more clamp pressure than stock, and meets SFI specifications. At this high level of performance RAM POWERGRIP provides surprisingly good driving characteristics with smooth, comfortable driver control.

RAM Clutches® - Product Catalog RAM Clutches® - Important Factors in Seliction a Clutch Important!Made In USA RAM Clutches Authorized Dealer Additional Information FAQ About us

Brand:

RAM Clutches

Part Number:

98951

UPC:

809009351058

Warranty

Performance Sets and Components

Due to the intended use of these products, warranty is limited to 30 days for correct fit to the specified vehicle, provided there are NO modifications or changes to driveline, tire & wheel diameter, or release mechanisms from factory original components, except as specified as necessary by RAM, and parts are installed as specified by RAM, and any recommended accessory items have been installed. Since this product is a consumable item, no warranty is offered or made for durability or specific performance. This product is intended for installation by qualified installers and hobbyists.

Street Dual Disc units

Street dual disc clutches are STRICTLY FACTORY WARRANTY ONLY.

Flywheels

RAM flywheels are STRICTLY FACTORY WARRANTY ONLY.

Hydraulic release bearings

Hydraulic release bearings are STRICTLY FACTORY WARRANTY ONLY.

Replacement Sets

RAM Replacement Sets are warranted for 12 months or 12,000 miles (whichever occurs first) against manufacturing defects when installed in an unmodified in any way, factory stock passenger car used exclusively for daily transportation. No warranty is offered for commercial, off road, street performance, or racing use. This warranty requires resurfacing the flywheel before installation and any items submitted for warranty evaluation must be accompanied by proof this procedure has been performed. The warranty specifically excludes damage from faulty installation, improper adjustment, physically damaged or broken parts, burned friction surfaces, or prematurely worn parts due to overload or misuse. This product is intended for installation by qualified installers and hobbyists.

Frequently, clutch problems are related to adjustment and/or release system malfunction.

Before removing the suspected warranty clutch from the vehicle, refer to the vehicle service manual for specific information on operation and adjustment of the release system to correctly test and adjust for proper release. If you cannot resolve the problem and must remove the clutch from the vehicle, use the following guidelines to determine if your clutch qualifies for warranty status.

Warranty Status Inspection and Evaluation Checklist

Pressure Plate

Are lever tips worn or grooved?

Are there burn or heat spots on the friction surface?

Is there lubricant or coolant on the pressure plate?

Disc

Is the friction material burned, broken, or excessively worn?

Is the disc carrier or drive hub broken?

Have any of the damper springs been forced or broken from the disc?

Is there lubricant or coolant on the disc?

Release Bearing

Is the bearing face worn or scored?

Has the lubricant been thrown out of the bearing?

Has the bearing turned blue?

The above listed items are what RAM looks for in evaluating a warranty product.

If your clutch components do not show any of the above problems the clutch is probably serviceable and there are other release system or flywheel thickness problems that need correction. (Removing more than 0.025” when resurfacing the flywheel will require installation of a flywheel shim to bring the friction surface back to its original position in relation to the release bearing.)

If after checking and repairing/replacing the clutch release components and/or flywheel, you are unable to obtain proper clutch operation, the complete set including the release bearing should be sent to RAM freight prepaid for factory inspection. You must include the original sales receipt and a receipt for resurfacing your flywheel. If the clutch set is found to be defective RAM will repair or replace the defective component(s) at no charge. If the unit is found to be not defective, you will be advised the cost of repair or replacement. All freight charges are the responsibility of the customer.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(5)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

1-5 of 5 Reviews

Sort by

4 of 5

Good Product!

I ordered for my 2006 mustang gt.. got it installed without much issue. Not too hard Clutch press.

RAM Clutches® - HDX Clutch Kit

Posted by Aman (Mabela, Muscat) / May 11, 20222007 Ford Mustang

5 of 5

RAM Clutches

I`m glad my Challenger is finally on the run. And performs even better than before. This clutch looks like the OEM one. I know it`s a replacement part, but still fits and works awesome! I made a great choice and saved my money with this clutch and CARiD. Thank you guys thanks for helping me to get the car back on track.

RAM Clutches® 60-2370N - Pro Street Dual Disc Clutch Kit

Posted by James (London, LO) / September 20, 20182011 Dodge Challenger

5 of 5

Good Replacement

There`s always some risk of wrong fit when buying replacement products, but this clutch kit with all it`s features was really attractive for such price. Besides, my friends recommended me RAM Clutches. I wish delivery was faster, but this is a good product to wait for. Buy it!

Posted by Richard (Bennington, VT) / September 11, 20182001 Dodge Ram

5 of 5

Clutch Kit for Camaro

My new clutch kit was delivered in a week, as was promised. Nice metal disc and aluminum flywheel, hardware included, everything as described. Good replacement of the OEM clutch, perfect fit, smooth ride. I was afraid it`s a bit overpriced, but now I know ir`s really worthy. Works great!

RAM Clutches® 75-2105N - Force Dual Disc Clutch Kit

Posted by Marco (Frankfort, IN) / September 03, 20182012 Chevy Camaro

5 of 5

Powergrip Heavy Duty Clutch Kit

I`m restoring my dad`s 1977 Corvette and searching for parts quite scrupulously. I already had a flywheel and all necessary hardware and needed a new clutch kit with no flywheel included not to pay more. And this deal is worth every penny. Nice new products for such money – fits and looks really good, I`ll recommend it to you if you ask me.

RAM Clutches® 98764HD - Powergrip Heavy Duty Clutch Kit

Posted by Humberto (Rosetta, TS) / August 24, 20181977 Chevy Corvette

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!