Features
- Retains steering wheel controls (pre-programmed)
- Data controlled accessory and navigation outputs
- 10A accessory output
- Single programmable 12V output
- Easily configurable using a PC
- Retains factory amplifier (RPA-SPDIF required)
- Retains USB input
- Retains AUX input (RCA to 3.5mm adapter may be required depending on aftermarket radio's AUX input connection)
- Direct USB updatable
- Patent # 8,014,540 & 8,184,825
Product Details
RadioPRO4 Radio Replacement Interface by PAC®. An all in one radio replacement and SWC interface, the innovative RadioPRO4 comes pre-loaded with amplifier retention and SWC software, navigation based output signals and other features that save time and money during installation.
installation instructions
if this is the first time using the radiopro pc application, download the radio pro pc application. this can be found at the "download" tab at the very bottom of the firmware list on this page.
download the firmware file.
install the radio pro pc application using the .exe file you downloaded in step one.
open the radiopro pc application using the new shortcut created on your desktop.
connect the interface to the computer using a standard to micro usb cable.
click the "firmware" icon.
click "select file" and browse to the new firmware file. the new firmware can be found where you saved it before beginning.
once the file is chosen the update will begin. when successful it will show the text "update completed".