Includes
- Vehicle specific harness
- Interface module
- Installation instructions
Features
- Includes wired outputs for navigation radio installation
- Rear camera activation while in motion
- 10 Amp ACC 12 volt output
- Direct USB updatable
- Camera system ready - requires PAC VS41
- Patent # 8,014,540 & 8,184,825
Product Details
RadioPRO Radio Replacement Interface by PAC®. The RP4.2-MB11 radio replacement interface is your plug-n-play solution to upgrade your factory radio with an aftermarket radio in Mercedes Sprinter or Metris vehicles. Steering wheel controls, 3.5mm AUX input, USB port and the back-up camera function are all retained with the RP4.2-MB11. By adding on the PAC VS41, you have the ability to add front and blind-spot cameras creating a complete camera system. PAC quality and engineering provides you the most professional installation solution available!
Installation
Installation Instructions
If this is the first time using theRadioPROPC Application, download the Radio PRO PC Application. This can be found at the "Download" tab at the very bottom of the firmware list on this page.
Download the firmware file.
Install the Radio PRO PC Application using the .exefile you downloaded in step one.
Open theRadioPROPC Application using the new shortcut created on your desktop.
Connect the interface to the computer using a standard to microUSBcable.
Click the "Firmware" icon.
Click "Select File" and browse to the new firmware file. The new firmware can be found where you saved it before beginning.
Once the file is chosen the update will begin. When successful it will show the text "Update Completed".
Retains:
Steering wheel controls
3.5mm AUX input
USB port
Back-up camera function