NecksGen Racing Safety Equipment

Universal REV2 Lite Neck Brace by NecksGen® .

Universal REV2 Lite Neck Brace (NG501) by NecksGen® Size: Medium. Medium size REV 2 Lite. NecksGen most popular size. Fits necks up to 6" wide. The REV 2 LITE is the ultimate head and neck restraint. Weighing in at only 1.2 lbs. / 550...

Quick Release Helmet Hardware by NecksGen® . Need an extra set of quick releases for your spare helmet? This is the current standard issue quick release helmet hardware set (pair) for your NecksGen devices. Comes complete with M6-1.0 X...

Universal REV2 Lite Neck Brace (NG502) by NecksGen® Size: Large.

Universal REV Replacement Tether by NecksGen® . Material: Aramid Fiber. Replacement Aramid Fiber tether for your NecksGen REV device. The NecksGen tethers are made from high quality fire resistant Aramid Fiber webbing and stainless...

Universal REV Neck Brace by NecksGen® .

Universal REV2 Head and Neck Restraint by NecksGen® . Material: Carbon.

Universal REV Replacement Tether (NG279) by NecksGen® . Material: Aramid Fiber. Length: 19". Replacement Aramid Fiber tether for your NecksGen REV device. The NecksGen tethers are made from high quality fire resistant Aramid Fiber...

Universal REV Replacement Tether (NG292) by NecksGen® . Material: Aramid Fiber. Length: 21". Replacement Aramid Fiber tether for your NecksGen REV device. The NecksGen tethers are made from high quality fire resistant Aramid Fiber...

Universal REV Hardware Kit by NecksGen® . This hardware kit comes with all the bits to freshen up your REV device. One kit works for all sizes, and the tether bolts come with thread locker pre-installed. All hardware is stainless steel...

Universal REV Neck Brace (NG20) by NecksGen® Size: Large. The large 3" REV is made with bigger drivers in mind. Works with 2" or 3" shoulder harnesses and fits drivers with necks wider than 6" comfortably. 1 set of quick release helmet...

Universal REV Neck Brace (NG21) by NecksGen® Size: Medium. The medium 3" REV is the most popular size we make. Works with 2" or 3" shoulder harnesses and fits up to a 6" wide neck comfortably. 1 set of quick release helmet hardware is...

Universal REV Neck Brace (NG23) by NecksGen® Size: Small. This SFI 38.1 approved HNR is the smallest we make. Designed for small adults or youths that utilize a 2" wide shoulder harness. Neck widths over 5" are recommended to use a...

Universal REV2 Lite Pad Set by NecksGen® , 2 Pieces. Covered in a durable F.R. material on top, and an air mesh on bottom for comfort and breath-ability. Replacement pads for your REV2 Lite. Over time your pads may need to be replaced...

Universal REV2 Lite Tether Pin by NecksGen® . Stainless steel pin that holds the REV2 Lite tether. These should be replaced if you are replacing your tether due to an impact or accident. Use 4MM or 5/32" allen key to remove/install. Do...

Universal REV2 Replacement Lite Tether by NecksGen® . Replacement tether for your REV2 Lite HNR. Choose the length from the dropdown menu below. 27" is the standard length. Get buckled in your car as if you are ready to race and look...

Helmet & REV Bag by NecksGen® . Sorry, the lower compartment does not fit the NecksGen Original device. It has adequate space for all sizes of the NecksGen REV only. This helmet bag fits most XL adult sized auto racing helmets and has a...

Red Quick Release Pull Tether by NecksGen® Color: Red. 4" long red polyester pull tether with key-ring for the quick release helmet hardware. This top-grade product is expertly made in compliance with stringent industry standards to...

Universal REV Neck Brace by NecksGen® Size: Medium.

Universal REV2 Large Head and Neck Restraint (NG902) by NecksGen® Size: Large. Material: Carbon. Thickness: 3".

Universal REV2 Medium Head and Neck Restraint (NG905) by NecksGen® Size: Medium. Material: Carbon. Thickness: 2".

Universal REV2 Medium Head and Neck Restraint (NG903) by NecksGen® Size: Medium. Material: Carbon. Thickness: 3".

Universal REV2 Lite Neck Brace (NG500) by NecksGen® Size: Small.