Vehicle Fitment
Make | Model | Year |
---|---|---|
Toyota | 4Runner | 2014-2020 |
Make | Model | Year |
---|---|---|
Toyota | 4Runner | 2014-2020 |
XB™ G2 Gloss Black Sequential DRL Bar Projector LED Headlights with Sequential Turn Signal (LF531.2-ASM) by Morimoto®. 1 Pair. Gloss Black housing, clear lens. If you don't have LED powered headlights on your vehicle, then it's high time to look at these amazing LED DRL bar headlights by Morimoto. They look great, feature a well-built construction, and have a virtually infinite lifespan. Offering unsurpassed illumination and carrying an unbeatable warranty, these headlights outperform all alternatives.
Bulb type: Osram Ostar LED |
LED color (running, DRL/parking): white |
LED color (turn signal): amber |
Color temperature (low, heigh beam): 5500K |
Color temperature (DRL): 5000K |
Raw lumens (per headlight): 2600 |
Operating voltage: 9-32V DC |
Beam type: low, high beam |
Functions: LED DRL, sequential turn signal |
Housing material: UV-resistant high impact polycarbonate |
Optic: Tri-Kuria LED Optic |
Reflector color: smoked |
DOT, ECE, SAE, FMVSS108 compliance |
Left hand traffic |
IP67 waterproof |
Increased light output for superior illumination
With three projectors for the low beam and a dual Bi-LED setup, the new Gen 2 XB LED headlights from Morimoto provide 33% more light output for the low-beam mode and 100% more output for the high-beam mode.
Morimoto Bugatti Chiron startup sequence for enhanced style
These headlights will surely make your vehicle look one of a kind with the Bugatti Chiron startup sequence that initiates when you unlock your truck.
Improved reliability thanks to key circuit design upgrades
The new XB LED headlights are even more reliable than the original XBs because they feature an improved key circuit design.
Optimized beam pattern to enhance foreground illumination
The beam pattern of these headlights has been optimized to ensure better distribution of light with more foreground, thus making cornering a safer experience.
DOT approved for use on the road
Made with the utmost attention to detail, these headlights are guaranteed to meet or exceed all DOT, SAE, and FMVSS108 regulations when aimed correctly.
Easy plug and play installation with no modifications
Morimoto XB LED headlights will seamlessly install in place of your stock headlights using factory connectors. The lights come with all the necessary accessories for a hassle-free install.
Backed by a 5-year warranty
This warranty does not apply to any products that have been subjected to misuse, mishandling, misapplication, neglect, improper installation, or alterations.
Morimoto's XB LED headlights produce a well-defined beam pattern with a great amount of width, intensity, and a proper distribution of light. Their LED daytime running light is powered by high intensity LEDs and is insanely bright and easily visible during the day. The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the breakthrough projector is as modern as it gets.
The headlights feature a row of amber LEDs that provide the turn signal function. You can set them up to run as a sequential signal. Those who are a bit more traditional can setup these lights to run as solid on/off style signals too. The UV-coated lens of the lights is made to resist the test of time, ensuring your headlights will look good as new for many years to come. The housing is lightweight and much stronger than comparable alternatives. The heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light.
Make no mistake, these lights will produce a much different, better result than some LED replacement bulbs in your stock housings. Their optics meet and exceed all SAE, DOT, and FMVSS108 regulations when aimed properly… and that's easy to do with their integrated vertical/lateral adjusters. Wiring is easy too! The headlights are designed to work without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug-and-play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.
Morimoto® was established in 2008 in the USA to fill the gap in the aftermarket for truly high-quality automotive lighting products. Since that time, the company has grown to become one of the most renowned manufacturers of high-intensity lighting solutions that improve both the aesthetic appearance and real performance of your vehicle. The existing Morimoto product line is hard to beat! The company offers superior-grade HID systems, HID bulbs and ballasts, LED bulbs, LED head and tail light assemblies, and many other products made using cutting-edge technology to be superior to the competition in every way. Whether you’re driving a high-performance street car, off-road truck, public safety or commercial vehicle, Morimoto can meet the specific needs of any application in terms of light output, color, form, function, and efficiency.