Vehicle Fitment
Make | Model | Year |
---|---|---|
Audi | S4 | 2010-2016 |
S5 | 2008-2017 |
Make | Model | Year |
---|---|---|
Audi | S4 | 2010-2016 |
S5 | 2008-2017 |
Dual Mass Flywheel by LuK®. LuK dual mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual mass flywheels cannot be resurfaced.
Bolt Hole Pattern: 2 |
Overall Casting O.D.: 11.0787 inch |
Overall Casting O.D.: 281.4 mm |
Crank To Friction Surface: 3.5315 inch |
Crank To Friction Surface: 89.7 mm |
Cup depth, secondary flywheel: -0.3701 inch |
Cup depth, secondary flywheel: -9.4 mm |
Flywheel friction surface outer diameter: 9.4094 inch |
Flywheel friction surface outer diameter: 239 mm |
Bolt hole PCD crankshaft: 3.0709 inch |
Bolt hole PCD crankshaft: 78 mm |
I.D. for Pilot: 0.9843 inch |
I.D. for Pilot: 25 mm |
Flywheel Friction Surface Inner diameter: 6.1024 inch |
Flywheel Friction Surface Inner diameter: 155 mm |
Dowel hole diameter: 0.2362 inch |
Dowel hole diameter: 6 mm |
Dowel Hole Pattern: 5 |
Crank Hole Dia.: 0.3937 inch |
Crank Hole Dia.: 10 mm |
Centering diameter / dowel hole: 10.2362 inch |
Centering diameter / dowel hole: 260 mm |
Torque Capacity DMFW: 18.7677 inch |
Torque Capacity DMFW: 476.7 mm |
Bolt hole PCD clutch pres.plte: 10.2362 inch |
Bolt hole PCD clutch pres.plte: 260 mm |
Flywheel Thickness [mm]: 4.4114 inch |
Flywheel Thickness [mm]: 112.05 mm |
The flywheel is an integral part of a clutch replacement. In today’s tightly packaged clutch systems, flywheels can easily be machined beyond their usable life – a critical flaw that would not be evident until after the clutch is installed. Improper machining can also cause interference, no release and slipping problems. Pairing your LuK RepSet with a new LuK flywheel is a smart, cost-effective alternative to resurfacing.
LuK® is a leading manufacturer of the systems and components for vehicle's powertrains. It was the first company in Europe which engineered the diaphragm spring clutch with a release system which is now installed in every third new car. At present the company manufactures dampers, components for clutch systems, transmissions, as well as products for tractors. The newest innovative product developments of LuK are the automation of manual transmissions, torque converters, and components for CVT transmissions that could handle more than 300 Nm of torque.