Vehicle Fitment
Nissan
Specifications
| Torque Capacity DMFW | |
|---|---|
| Torque Capacity DMFW | |
| Dowel Hole Pattern | |
| Ring Gear To Friction Surface | |
| Ring Gear To Friction Surface | |
| Crank To Friction Surface | |
| Crank To Friction Surface | |
| I.D. for Pilot | |
| I.D. for Pilot | |
| Flange Thickness | |
| Flange Thickness | |
| Torque Capacity Limiter | |
| Torque Capacity Limiter | |
| Cup depth, secondary flywheel | |
| Cup depth, secondary flywheel | |
| Bolt hole PCD crankshaft | |
| Bolt hole PCD crankshaft | |
| Flywheel friction surface outer diameter | |
| Flywheel friction surface outer diameter | |
| Flywheel Thickness [mm] | |
| Flywheel Thickness [mm] | |
| Overall Casting O.D. | |
| Overall Casting O.D. | |
| Bolt hole PCD clutch pres.plte | |
| Bolt hole PCD clutch pres.plte | |
| Flywheel Friction Surface Inner diameter | |
| Flywheel Friction Surface Inner diameter | |
| Ring Gear Thickness | |
| Ring Gear Thickness | |
| Ring Gear Major Dia. | |
| Ring Gear Major Dia. | |
| Number of teeth, starter ring gear | |
| Dowel hole diameter | |
| Dowel hole diameter | |
| Centering diameter / dowel hole | |
| Centering diameter / dowel hole | |
| Has Dowel Pins | |
| Ring Gear Mounting O.D. | |
| Ring Gear Mounting O.D. | |
| Ring Gear Number | |
| Crank Hole Dia. | |
| Crank Hole Dia. | |
| Bolt Hole Pattern |
Features
- Engineered and manufactured to OE specifications
- All new components - including ring gear and dowel pins
- Perfectly balanced
- Precision-machined from premium grade cast iron
- Superior quality friction surface
- Excellent heat-absorbing capacity
- Order from the comfort of your home or office
- 8 mounting bores
- With pilot bearing
- No SVHC present
Product Details
Dual Mass Flywheel (DMF100) by LuK®. LuK dual mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual mass flywheels cannot be resurfaced.
Installation
The flywheel is an integral part of a clutch replacement. In today’s tightly packaged clutch systems, flywheels can easily be machined beyond their usable life – a critical flaw that would not be evident until after the clutch is installed. Improper machining can also cause interference, no release and slipping problems. Pairing your LuK RepSet with a new LuK flywheel is a smart, cost-effective alternative to resurfacing.
LuK® - ManualLuK® - Installation InstructionsLuK Authorized DealerInstallationAdditional InformationAbout us
Brand:
Part Number:
DMF100
UPC:
670774201479
OE Numbers:
12310ET02C, 12310ET01C, 12310ET000, 12310ET00A, 7701066221, 123001547R
Reviews
(7)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
1-7 of 7 Reviews
Posted by Karlee (Santa Rosa, CA) / June 03, 20242016 Ford Focus
Posted by Richard G (Boise, ID) / March 16, 20182007 Mini Cooper
Posted by Donald (Omaha, NE) / November 02, 20162002 Volvo S60
Posted by Wayne V. Evans (Baltimore, MD) / June 04, 20152008 Volkswagen Jetta
Posted by Susan (Princeton, NC) / May 05, 2024
Posted by Adam (Albuquerque, NM) / September 04, 20202006 Mitsubishi Lancer
Posted by Enrico (Waipahu, HI) / June 11, 20192008 Mini Cooper
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!