California Edition Max Energy™ Programmer by Hypertech®. Premium Octane: +36HP +42TQ. Regular Octane: +35HP +42TQ. The Max Energy Power Programmer installs Hypertech's custom developed tuning which adds maximum power and performance for any kind of driving! Max Energy Tuning extracts every bit of energy possible out of every molecule of fuel giving you more miles at part-throttle and more power at wide-open throttle. In order to increase engine efficiency, horsepower and torque, our engineers first optimize the spark and fuel curves point by point over the entire rpm band. With the additional power and optimized transmission functions, drivers use less fuel to accelerate and maintain cruising speeds without the torque converter un-locking and transmission down-shifting to a lower gear. The results are maximum power and fuel mileage.
Specifications
Premium Octane: +36HP +42TQ |
Regular Octane: +35HP +42TQ |
Screen Control: Button Control |
Trouble Codes: Read and Clear |
Features
- 1-2 Shift Point -532 to +532 RPM, 133 RPM increments
- Shift Firmness 1-2, 2-3, 3-4: 25%, 50%, 75%, & 100%
- 2-3 Shift Point -525 to +525 RPM, 75 RPM increments
- 3-4 Shift Point -500 to +500 RPM
- 4-5 Shift Point -500 to +500 RPM
- 5-6 Shift Point -500 to +500 RPM
- Speedometer\Odometer Correction For Gears 2.73, 3.08, 3.27, 3.31, 3.55, 3.73, 3.90, 4.10 & 4.30, 4.56
- Speedometer\Odometer Correction For Tire Sizes 24-54 inches 1/4 inch increments
- Top Speed Limiter 25 - 75 MPH in 5 MPH increments, 81 to 255 MPH to match speed rated tires
- Rev Limit -500 to +500 RPM
- Cooling Fans Stock, 180 degrees F, 195 degrees F
- Return Back To Stock
- DTCs Read and Clear
- Internet Updateable
Installation
The gasoline engine Max Energy hand-held tuner from Hypertech® gives you the ability to increase power, mileage, and towing ability along with other great features competitors don't offer. But first, Max Energy series come loaded to optimize spark and fuel curves at all rpm levels, across all throttle openings for your specific vehicle. What does this mean? Economy is increased at part throttle and steady cruising applications, and usable horsepower and torque are increased when the throttle is used more aggressively, or when towing mode is selected. Controlling electronic automatic transmission functions keeps the torque converter from unlocking and gears from downshifting when you need steadier drivability for towing. Additionally, you can expect to see fuel economy gains of 2 to 6 miles per gallon depending on driving conditions. All Max Energy units come with a USB cable and CD for initial activation using your computer. Should new software tunes for your specific vehicle be introduced in the future, they can easily be downloaded from Hypertech's internet site.
If you have a V8 engine with a cylinder cutoff mode to run on 4 cylinders, the Max Energy Gasoline Power Programmer allows you to vary the parameters of when that occurs, or turn the cutoff function off altogether. For vehicles originally designed to run on lower octane regular gasoline, a performance enhancing algorithm is created for running on regular octane. And if you wish to use super unleaded in your lower-octane rated vehicle, a second power level is created to adapt fuel and timing to make the most out of it – something your vehicle won't do on its own. A speedometer calibrator function allows correction of speedometer readings when non-stock tires or gear ratios are installed. If that's not enough, the Max Energy programmer also reads and clears diagnostic trouble codes so you can turn check engine lights off. All Hypertech products are backed with a limited lifetime warranty against manufacturing defects.
Since its founding in 1985 in Tennessee, Hypertech® has been an industry leader in engine power enhancement through the use of software enhancements. In 1986, Hypertech created the original "power chip" which physically replaced factory engine control computers and increased horsepower and torque through remapping of computer-controlled fuel injection and ignition timing. As computer controls spread to other vehicle systems such as transmissions, throttle bodies, and variable-valve timing over the years, Hypertech was instrumental in software development that maximized the benefits of each of those systems to push the envelope of performance and fuel economy. In 1994, Hypertech was instrumental in creating the Power Programmer application which made it possible to download software enhancements into an existing ECU, which eliminated the need for replacement chips. Hypertech continues to lead the way today, and our virtual store is proud to sell their range of innovative tuners that offer features competitors haven't even thought of yet.