Product Details
ZEUS Series 1200W 2-Channel Class AB Amplifier by Hifonics®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship. Manufactured from industry-leading materials using up-to-date equipment, it ensures everlasting reliability and enduring value. This product is distinguished by total quality assurance, unsurpassed by anybody else.
Specifications
Class: Class A/B |
Total Channels: 2 |
Max Power : 1200W |
Power @ 2 Ohm: 2 x 600W |
Power @ 4 Ohm: 2 x 300W |
Mono Bridged @ 4 Ohm: 1 x 1200W |
Crossover: Variable Electronic 12dB Per Octave |
Variable High Pass Crossover 12dB per Octave: 40Hz-300Hz |
Variable Low Pass Crossover 12dB per Octave: 40Hz-300Hz |
Tone Control / Parametric EQ: Built-in Bass Control |
Bass Boost: 0-9dB |
Variable Voltage: 0.2-6V |
Frequency Response: 10Hz-22kHz |
Total Harmonic Distortion (THD): 0.5% |
Speaker Level Audio Inputs: Yes |
Power Terminal 12V/GND: 4 AWG |
Speaker Terminal Wire Gauge: 12 AWG |
Fusing: 40A |
Weight: 11.15 lb |
Item Length: 10.875" |
Item Width: 8.25" |
Item Height: 2.375" |
Features
- High in power, efficient in performance, reliable in service
- User-friendly design, ergonomic handle, solid construction
- Will become your right hand in DIY and repair projects
- Made to meet stringent quality and safety requirements
Low Noise Preamplifier Circuit
Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
RCA Inputs
Nickel plated high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant.
High Level Inputs
Easily tie into OEM audio systems that do not offer RCA output to maximize after market amplifier power.
Operation Mode
Two Channel, Full Range, Bridgeable: Flexible installation allows this amplifier to run in two channel or bridged mono mode.
Crossover Type
Onboard electronic crossover
Electronic Equalizer
Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers.
Class / Topology
Class A/B: Designed to be high sound quality with minimal distortion.
Output Device Technology
PWM MOSFET Power Supply: Stable power through the PC board with minimal heat generation.
Heat Sink
Aluminum Hifonics Heat sink for superior heat dissipation.
Power Supply
Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices.
Output Connections
RCA Outputs: Daisy chain multiple amplifier to eliminate additional signal cables from the source unit.
Connection Type
Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile.
LED System Protection Circuitry Diagnostics
Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel.
Hifonics® has been setting the pace in the audio competition lanes since car audio competitions started. Whether you build a clear sound quality system that puts you in the mind of Aphrodite or an SPL system with the power of Thor’s hammer – Hifonics has you covered.