Vehicle Fitment
| Make | Model | Year |
|---|---|---|
| Subaru | WRX | 2015-2017 |
Product Details
Catted J-Pipe/Downpipe by GrimmSpeed®. With the 2015 J-Pipe, the devil is truly in the details and the product development team here at GrimmSpeed has taken the time necessary to knock each of those details out of the park. As a result, what you see here is a meticulously engineered J-Pipe with an innovative flange design, single piece construction, excellent ground clearance and fitment with superb quality and craftsmanship.
Notes
- This is a Race Only product that is to be used solely for competition. It cannot be used on vehicles that are operated on public streets, roads or highways. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. Shipping Restriction: CA, NY, ME.
Specifications
| Finish: Raw |
| Main Piping Diameter: 3.00" |
| Quantity: 1 Piece |
Includes
- 1 X Welded J-Pipe Assembly
- 1 X Grimmspeed Stainless Mls Turbo To J-Pipe Gasket
- 1 X Grimmspeed Stainless Mls J-Pipe To Catback Gasket
- 4 X Stainless Turbo Studs W/ Nuts
- 2 X Replacement Catback Bolts W/ Nuts
- 1 X O2 Sensor Plug (Plugs Third O2 Bung For Future Use)
- 1 X Grounding Strap Bolt (Not Pictured)
- 2 X Grimmspeed License Plate Frames
- 1 X Grimmspeed Sticker
Features
- Innovative Turbo Flange Design - 1/2" thick while retaining all OEM brackets
- One-Piece Tube - Ensures exact fitment, robust construction and ease of installation
- Smooth 3.5" to 3" Transition - Matches turbine outlet size and then reduces quickly to maintain exhaust velocity
- 100% Made in the USA - Manufactured right here in Minnesota
- Optimized Tube Routing - Maximize ground clearance and minimize flow restriction without modifying suspension hardware, etc
- Custom Stainless Turbo Studs - Replace the terrible OEM studs and nuts with these, machined specifically for use with 2015 WRX turbine outlet and our 1/2" flanges
- Standard 3rd O2 Bung - Allows the future use of aftermarket sensors
- Grounding Strap Mount - Retains all factory functionality
- 300 Cell Metallic Substrate Catalytic Convertor (Catted Models Only) - Excellent balance of the reduced restriction of a 'race cat' without the stink of a 200 cell unit
- Expertly made from sturdy materials
- Made to help enhance the performance of your vehicle
- Perfect solution for racing and high-performance engine applications
Performance and Tuning
Performance of the J-Pipe was verified on their 2015 WRX using the following method. Their tuned baseline run is the same run that they used in showing the boost control performance of the GrimmSpeed 3-Port Solenoid. They then installed the J-Pipe and retuned the car, using the exact same tuning methodology to ensure consistency. This ensured a real apples-to-apples comparison between the stock J-Pipe and the GrimmSpeed unit. The results showed a gain of 26.7whp (14.1%) and 19.8wtq (9.0%) and are displayed in the chart to the left. The percentage gains should be the focus here, as this particular dyno reads very low (stock baseline was 171). From a completely stock vehicle, users can expect a gain of around 45whp (27%) and 70wtq (41%) with the installation of the GrimmSpeed J-Pipe and custom tuning. The chart on the right shows this comparison.
Design
GrimmSpeed engineers began by 3D scanning the OEM J-Pipe and vehicle underbody using their in-house FARO Arm. That data was used in CAD to design a pipe that fits perfectly within the tight underbody packaging on a 2015 WRX without sacrificing ground clearance. The 2015 WRX uses a series of OEM brackets to support the weight of the turbo and J-pipe, the most important of which bolts to the turbine outlet flange. Their engineers insisted on using thick 1/2" stainless steel flanges, but also knew that without a clever design, the very important OEM brackets would no longer line up. The GrimmSpeed flange design uses a CNC machined pocket that the OEM bracket sits in during installation, allowing the use of 1/2" thick flanges as well as the factory turbo support bracket!
Finally, they worked tirelessly to design and manufacture a J-Pipe that could be bent from a single piece of tubing. This allows for more efficient manufacturing, less potential failure points and a product that fits perfectly each and every time.
Materials
In true GrimmSpeed fashion, no corners were cut in the fabrication of each and every one of these J-Pipes. A proper design is no good without proper material selection. In this case, 304 series stainless steel is the best choice for durability, corrosion resistance and cost efficiency. Flanges are machined from 1/2" thick plate and the primary tube is CNC bent, laser cut and expanded from 3" tubing. O2 bungs (three of them) and their custom turbo studs (included) are both machined on a CNC lathe from 304 rod. Finally, finished assemblies are TIG welded using 308L filler rod.
Construction
Last, but certainly not least, is construction. A solid design and robust materials are nothing without use of the correct manufacturing methods and welding processes. Each GrimmSpeed J-Pipe is welded in the same master weld fixture. When not in use, a 'master pipe' lives in that fixture, allowing for a quick check, before each production run, that the fixture is still accurate. Even that isn't good enough for their engineers, so they 3D scan the fixture and master periodically, to ensure accuracy.
GrimmSpeed® was founded in 2006 to provide customers with innovative and highly engineered aftermarket products. In short, they are a small group of highly dedicated car nuts who work in Minneapolis, Minnesota. GrimmSpeed® bread and butter started out anything Subaru. However, after growing GrimmSpeed® team and engineering they started developing products for: Mitsubishi, MazdaSpeed, and Hyundai markets. GrimmSpeed® are a true garage start-up and they have been lucky enough over the years to be able to turn it into exactly the business I had dreamed....probably a lot more actually. GrimmSpeed® have a wide breadth of expertise consisting of exhaust design, gaskets, pullies, phenolic spacers, porting and polishing, boost controllers, and many more.
Brand:
Part Number:
007103
Related Links
Reviews
(0)Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
Questions and Answers
(0)If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!