Product Details
600HP EFI System by FiTech®. The Go EFI 4 Self Tuning Fuel Injection is rated at 600 HP but is suitable for engines from 250 HP thru 600 HP. This system is perfect for your everyday Driver right up to your weekend Street Machine or Bracket Racer. It features the FASTEST most accurate Self Learning available, Timing control, Wet flow Annular discharge and tons of additional features. It fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine. This is also the only computer mounted throttle body that offers spark control without the need for an external spark box or special distributor. It also has a built-in fuel pressure regulator. A hand-held controller features a touch screen for quick and easy initial set-up.
Notes
- This is a Race Only product that is to be used solely for competition. It cannot be used on vehicles that are operated on public streets, roads or highways. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. Shipping Restriction: CA, NY, ME.
Specifications
Calibration Module Included: Yes |
Distributor Included: No |
ECM Included: Yes |
EGR: No |
Fuel Pressure Regulator Included: Yes |
Fuel Pump Included: Yes |
Fuel Rails Included: No |
IAC Motor Included: Yes |
IAT Sensor Included: Yes |
Injectors Included: Yes |
Intake Manifold Included: No |
MAP Sensor Included: Yes |
Metering Style: Speed density (Map-N) and speed throttle (Alpha-N) |
Oxygen Sensor Included: Yes |
Power Adder Compatible: No |
Self Tuning: Yes |
Throttle Body Included: Yes |
Throttle Body Mounting Flange: 4-barrel square bore |
Timing Control Compatible: Yes |
TPS Sensor Included: Yes |
Transmission Controller Included: No |
User Tunable: Yes |
Venturi Quantity: 4 |
Wiring Harness Included: Yes |
Flow Rate: 80 Lb/Hr |
Diameter: 44.45 mm |
Maximum Advertised Horsepower Increase: Up to 600 HP |
Style: Throttle Body |
Material: Cast Aluminum |
Fuel Type: E85 |
Type: 850 CFM |
Throttle Body Finish: Black Powdercoated |
Quantity: Kit |
Includes
- Die Cast Throttle Body
- Handheld Controller
- Windshield Mount
- (4) Hi-Flow 600 HP injectors
- Built-in pressure regulator
- 2.5 BAR Internal MAP Sensor
- Throttle Position Sensor
- Idle Air Control
- Coolant Temp Sensor
- Wide band O2 Sensor
- O2 Bung Kit
- -06AN Fuel Inlet Fitting
- Gasket Kit
- 255 LPH Inline external fuel pump with fittings and mounting hardware
- 20-feet of EFI grade -6AN fuel hose suitable for both the inlet and return lines
- 5-feet of EFI grade -8AN fuel hose
- Billet -8AN 100 Micron pre-filter with fittings and mounting bracket
- Billet -6AN 30 Micron post filter with fittings
Features
- (4) Hi-Flow 600 HPinjectors
- Initial setup is quick and easy. Simple touch screen selections get you up and running in minutes
- Self-tuning** After startup the ECU immediately takes over and provides your vehicle with an optimum tune
- Basic install can be done with just 4 wires and 2 sensors to install
- Uses a Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts
- The ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a huge amount of time and keeps things simple and neat
- Throttle bodies have a completely universal base to fit any 4-bbl manifold
- Throttle Linkage suits most transmissions
- Choice of three fuel inlet connections
- All Go-EFI’s feature Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing
- Go-EFI Systems feature Wet flow technology and have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION
- Ignition timing can be controlled and adjusted on the fly from your touch screen controller
- Air Fuel ratios can be optimized on the fly as you drive! Try that with your Carb
- Part #30001 & #30002 feature 1 adjustable fan control switch
- Will work with CDI box but not required to control timing
- Built in Fuel pressure regulator.No extra regulator to mount on your fire wall
- Use of ignition timing control is optional and not required
- Ignition timing control does not learn, and requires synchronizing distributor to engine with a timing light
FiTech® is the leading manufacturer of technologically-advanced yet affordable electric fuel ignition systems for automotive applications. FiTech started with just a couple of EFI systems a few years ago, and now the company offers a wide range of fuel injection systems and components, such as electric fuel pumps, fuel filters, fuel delivery kits, etc. FiTech products are compatible with most engine types, including dual quad, nitrous and boosted ones. FiTech EFI systems and components are designed using the latest in the fuel injection engineering to deliver the performance you can rely on for years to come.