FiTech® 31002 - 600HP EFI System

1 review|Item # mpn4487535453
Universal Fit
  • Not Vehicle Specific
Notes:
  • This is a Race Only product that is to be used solely for competition. It cannot be used on vehicles that are operated on public streets, roads or highways. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws. Shipping Restriction: CA, NY, ME.
Manufacturer
$1,272.99
In Stock (1) - Ships Tomorrow 07.22.26
Have a Question? Ask a Specialist
800-505-3274Live Chat

Vehicle Fitment

This part is universal

Specifications

Calibration Module Included
Yes
Distributor Included
No
ECM Included
Yes
EGR
No
Fuel Pressure Regulator Included
Yes
Fuel Pump Included
Yes
Fuel Rails Included
No
IAC Motor Included
Yes
IAT Sensor Included
Yes
Injectors Included
Yes
Intake Manifold Included
No
MAP Sensor Included
Yes
Metering Style
Speed density (Map-N) and speed throttle (Alpha-N)
Oxygen Sensor Included
Yes
Power Adder Compatible
No
Self Tuning
Yes
Throttle Body Included
Yes
Throttle Body Mounting Flange
4-barrel square bore
Timing Control Compatible
Yes
TPS Sensor Included
Yes
Transmission Controller Included
No
User Tunable
Yes
Venturi Quantity
4
Wiring Harness Included
Yes
Flow Rate
80 Lb/Hr
Diameter
44.45 mm
Maximum Advertised Horsepower Increase
Up to 600 HP
Style
Throttle Body
Material
Cast Aluminum
Fuel Type
E85
Type
850 CFM
Throttle Body Finish
Black Powdercoated
Quantity
Kit

Includes

  • Die Cast Throttle Body
  • Handheld Controller
  • Windshield Mount
  • (4) Hi-Flow 600 HP injectors
  • Built-in pressure regulator
  • 2.5 BAR Internal MAP Sensor
  • Throttle Position Sensor
  • Idle Air Control
  • Coolant Temp Sensor
  • Wide band O2 Sensor
  • O2 Bung Kit
  • -06AN Fuel Inlet Fitting
  • Gasket Kit
  • 255 LPH Inline external fuel pump with fittings and mounting hardware
  • 20-feet of EFI grade -6AN fuel hose suitable for both the inlet and return lines
  • 5-feet of EFI grade -8AN fuel hose
  • Billet -8AN 100 Micron pre-filter with fittings and mounting bracket
  • Billet -6AN 30 Micron post filter with fittings

Features

  • (4) Hi-Flow 600 HPinjectors
  • Initial setup is quick and easy. Simple touch screen selections get you up and running in minutes
  • Self-tuning** After startup the ECU immediately takes over and provides your vehicle with an optimum tune
  • Basic install can be done with just 4 wires and 2 sensors to install
  • Uses a Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts
  • The ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a huge amount of time and keeps things simple and neat
  • Throttle bodies have a completely universal base to fit any 4-bbl manifold
  • Throttle Linkage suits most transmissions
  • Choice of three fuel inlet connections
  • All Go-EFI’s feature Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing
  • Go-EFI Systems feature Wet flow technology and have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION
  • Ignition timing can be controlled and adjusted on the fly from your touch screen controller
  • Air Fuel ratios can be optimized on the fly as you drive! Try that with your Carb
  • Part #30001 & #30002 feature 1 adjustable fan control switch
  • Will work with CDI box but not required to control timing
  • Built in Fuel pressure regulator.No extra regulator to mount on your fire wall
  • Use of ignition timing control is optional and not required
  • Ignition timing control does not learn, and requires synchronizing distributor to engine with a timing light

Product Details

600HP EFI System by FiTech®. The Go EFI 4 Self Tuning Fuel Injection is rated at 600 HP but is suitable for engines from 250 HP thru 600 HP. This system is perfect for your everyday Driver right up to your weekend Street Machine or Bracket Racer. It features the FASTEST most accurate Self Learning available, Timing control, Wet flow Annular discharge and tons of additional features. It fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine. This is also the only computer mounted throttle body that offers spark control without the need for an external spark box or special distributor. It also has a built-in fuel pressure regulator. A hand-held controller features a touch screen for quick and easy initial set-up.

Installation

Brand:
Part Number:
31002
UPC:
854549007019

Reviews

(1)
Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.
/5
1-1 of 1 Reviews
5 of 5
Great EFI for the Price
This is a top notch EFI all in one system. Installation is straight forward. Initial tuning is easy to setup. Just follow some on screen prompts and directions are well documented for install and configure. I had it up and running from install to configure in about 2.5 hours.
FiTech® - Go EFI 8 Power Adder Plus 1200HP Fuel Injection System
Posted by Corey (Saint Albans, WV) / March 01, 2017

Questions and Answers

(0)
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!