EZ Air Ride® CL-58-Biscayne - Classic™ Front and Rear Air Suspension Kit

EZ Air Ride gauge panel features 1 of exclusive EZ Air Ride domed glass - dual needle gauges along with 2 paddle valves for front and back control. These billet gauge panels were designed to give you that classic look when mounting them in your vehicle. Simply Set It & Forget It™

EZ Air Ride Set It & Forget It™ line of brackets were designed with you in mind. EZ Air Ride have custom made these brackets to fit your specific year vehicle. They are 100% bolt on and require absolutely no welding. Just bolt these in place of your factory coils and you re done. It s as simple as that. Just Set It & Forget It™. Each and every bracket is powder coated, labeled and includes all necessary hardware.

Air Lift Performance is proud to announce the second model from the brand new Dominator series line of air springs: the Dominator D2600! Featuring an unprecedented maximum restrained pressure of 600 psi, 9.7" usable stroke, and a load range of 349-3055 lbs. This bad boy will give you the performance you crave. With more lift, a softer, smoother ride, you can't go wrong with the new Dominator D2600!

EZ Air Ride air tubing is manufactured out of Nylon with leak free technology. EZ Air Ride give you enough of this air line to bag your entire ride.

Don't let the other guys charge you $50-$80 for this kit, EZ Air Ride include it for free: Relay, Wire Harness, 40 Amp Fuse w/ holder, 8 Gauge Power Wire (OXY Free/Not CCA), Teflon Tape, Thread Locker/Loctite, Cable Ties, Flashlight, Stickers

The Spare Air kit includes a special brass "T" fitting to connect your pressure switch and a quick connect valve to your 7 Gallon EZ Air Tank. EZ Air Ride Spare Air kit also allows you to fill up your air tank with the compressor in your garage or at a gas station. EZ Air Ride suspension kits are the first and only to now feature on board air as a no-cost luxury that comes standard in every kit.

This pack comes with all of the EZ Air Ride exclusive fittings you need to assemble an EZ Air Ride kit.

This tank comes with 5 ports total - (2) 3/8" ports on the ends, (2) 1/2" ports on the opposing faces, and a 1/4" port for the drain on the bottom. As it is true aluminum does not rust, condensation will occur in any tank, getting into your air lines and valves causing rust and contaminating other major components. EZ Air Ride tank is made out of steel and has a coating inside and out for years of corrosion protection.

Compressors are designed from the ground up to provide insane reliability paired with the performance you expect from a Viair product. The 444C air compressors feature a brand new, patent-pending, "intercooler" head design that helps disperse heat much more efficiently! It will fill a 2.5 ga tank from 0-200 psi in five minutes reliably and recharge from 165 back to 200 PSI in under a minute and a half!

EZ Air Ride Set It & Forget It™ line of brackets were designed with you in mind. EZ Air Ride have custom made these brackets to fit your specific year vehicle. They are 100% bolt on and require absolutely no welding. Just bolt these in place of your factory coils and you re done. It s as simple as that. Just Set It & Forget It™. Each and every bracket is powder coated, labeled and includes all necessary hardware.