Name: Eibach® 5.67095K - Rear Adjustable Solid Camber Arm
Brand: Eibach
SKU: mpn4800946708
Price: 289.00 USD
Availability: OutOfStock

Vehicle Fitment

Acura

Specifications

Material	Steel
Adjustment Range	-2.0 Degrees to +4.0 Degrees
Includes Alignment Components For	Two rear wheels
Quantity	Sold as a kit.
Rear Camber Degree of Correction 1	-2.00
Rear Camber Degree of Correction 2	+4.00
Wheel Alignment Component Type	Control arm

Features

Precision adjustable front upper control arm
Dual-threaded adjuster for easy caster/pinion angle adjustments
Adds articulation flexibility over oe control arm
Adds strength over oe control arm
Hybrid tubular and forged steel design for on or off-road use

Product Details

Rear Adjustable Solid Camber Arm by Eibach®. These alignment kits not only assist in adjusting a vehicle's camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to "dial-in" a performance-oriented alignment that uses negative camber to maximize a chassis' true potential.

On most modern vehicles, lowering your suspension will tilt the wheels inward at the top as they follow a circular pivot path. This is known as negative camber, measured in degrees. Typically, a one-inch drop can lead to -.75 degrees of camber. A two-inch drop changes camber by -1.5 degrees, and a three-inch drop can result in -2.0 or more degrees of change. Eibach's Pro Alignment kit is designed for your specific vehicle, and designed to provide the amount of correction needed to reverse the negative camber. It puts your tires back on the ground again and makes sure they are riding flat to maintain a proper contact patch. The camber alignment kit is recommended with all Eibach SportLine, ProLine, Pro-Street, or Multi-Pro series suspension lowering kits.

Once corrections have been made, stability, performance and safety will be restored and you will avoid very expensive tire wear. On some vehicle chassis applications, alignment specialists can opt to leave the camber at a slightly negative degree to heighten turn-in and responsiveness – because Eibach kits make that possible. Eibach proudly builds the Pro Alignment Kit in the United States, and backs all components with a two year warranty against manufacturing defects.

Made In USA Eibach Authorized Dealer Additional Information Catalog Warranty

Brand:

Eibach

Part Number:

5.67095K

UPC:

803050242068

Alternate MPN:

567095K

Warranty

1.Eibach’s Limited Million-Mile Warranty for Springs / Two-Year Warranty for Shocks

All Eibach Springs, Inc. ("Eibach") Suspension Springs, Anti- Roll-Kits (excluding “hardware”) Pro-Spacers, Pro-Dampers and Pro-Truck Shocks (including Sport and Sport Leveling) (collectively, "Products") are covered by a Million-Mile warranty (the Warranty). The Warranty covers the Products against factory defects in material and workmanship, other than coatings, when used on passenger cars and light duty (class 1-3) trucks under normal use and operating conditions. These Warranties only apply to the original purchaser who retains ownership of the vehicle on which the Products were originally installed (the "Purchaser"). Eibach Springs, Inc. will repair, replace or refund the purchase price of the defective product at Eibach Springs, Inc.’s sole digression, which shall fully satisfy and discharge any and all warranty claims.

Limited 12-Month Warranty

All Eibach Springs, Inc. (“Eibach”) suspension Coilover Systems (Pro-Street-S / Multi-Pro-R1 / Multi-Pro-R2, Multi-Pro-Drag), Drag-Launch (Air bags only), Pro-Alignment Kits and Anti-Roll-Kit hardware (collectively, “Products”), are covered by a 12-month warranty (the "Warranty") from date of purchase. The Warranty covers the Products against factory defects in material and workmanship, other than coatings, when used on passenger cars and light trucks under normal use and operating conditions. These Warranties only apply to the original purchaser who retains ownership of the vehicle on which the Products were originally installed (the "Purchaser"). Eibach Springs, Inc. will repair, replace or refund the purchase price of the defective product at Eibach Springs, Inc.’s sole digression, which shall fully satisfy and discharge any and all warranty claims.

2. Exclusions from Warranty

This warranty does not apply to any products: (1) That have been improperly installed or have not been properly installed by a qualified, licensed auto mechanic experienced in the installation and removal of suspension products; (2) That have been improperly serviced, that have been misused, or that have been modified, altered or subjected to abuse, negligence, accident or collision; (3) Installed in any vehicle that has been modified; (4) Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; (5) Installed on any vehicle that has been used for rallying, racing or racing-type activities or off-road use; (6) Presented for warranty coverage by a person other than the purchaser; or (7) Presented for warranty coverage after being used on a vehicle other than the one on which it was originally installed.

3. Reservation of Rights

Eibach reserves the right to make changes in design, materials and specifications, and to make changes to Products without prior notice. Eibach does not assume any obligation to modify any previously manufactured Products.

4. Exclusion of other Warranties

These Warranties are the entire and only Warranties for the Products and may not be modified or supplemented by any other person or company in any form. Any description of the Products, by anyone, is for the sole purpose of identifying them, is not part of the basis of the bargain, and does not constitute a warranty that the Products will conform to that description. The use of any sample or model in connection with these Warranties or the sale of any Products is for illustrative purposes only and is not a warranty that the goods will conform to the sample or model. The statements of any salesperson do not constitute part of these Warranties or any warranty at all and cannot be relied upon as a warranty. There are no warranties, expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose, which extend beyond the description on the face hereof. Any implied warranties are disclaimed to the fullest extent permitted by law and shall in no event exceed the purchase price of the product. These warranties do not cover consequential damages, loss of time or revenues, inconvenience, loss of use of the vehicle, damage to the vehicle or components of the vehicle, any other type of consequential damages, or other incidental or in direct damages. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages; in such states the above limitations or exclusions may not apply. These Warranties give the Purchaser specific legal rights and the Purchaser may have other rights that may vary from state to state.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!