Eibach® 5.81250K - Pro-Alignment™ Rear Camber Bolts

On most modern vehicles, lowering your suspension will tilt the wheels inward at the top as they follow a circular pivot path. This is known as negative camber, measured in degrees. Typically, a one-inch drop can lead to -.75 degrees of camber. A two-inch drop changes camber by -1.5 degrees, and a three-inch drop can result in -2.0 or more degrees of change. Eibach's Pro Alignment kit is designed for your specific vehicle, and designed to provide the amount of correction needed to reverse the negative camber. It puts your tires back on the ground again and makes sure they are riding flat to maintain a proper contact patch. The camber alignment kit is recommended with all Eibach SportLine, ProLine, Pro-Street, or Multi-Pro series suspension lowering kits.

Components in the Pro Alignment Kit you receive will vary depending on vehicle application and may include camber arms, camber bolts, replacement ball joints, replacement control arms, or flat shims. Once corrections have been made, stability, performance and safety will be restored and you will avoid very expensive tire wear. On some vehicle chassis applications, alignment specialists can opt to leave the camber at a slightly negative degree to heighten turn-in and responsiveness – because Eibach kits make that possible. Eibach proudly builds the Pro Alignment Kit in the United States, and backs all components with a two year warranty against manufacturing defects.