CURT® 511166 - Venturer™ NEXT Trailer Brake Controllers Time-Delay

Discovery™ has a digital display for easy monitoring and the ability to manage up to four axles at a time. It mounts at any angle, anywhere in your vehicle and comes with an automatic power level adjustment feature to ensure you can stay better focused on your driving and spend less time worrying about your trailer brakes. It is also compatible with anti-lock brakes, cruise control and is backed by a limited lifetime warranty. All CURT brake controls are designed to work with quick plugs so that they can readily plug into your vehicle's original equipment socket. They also include a mounting bracket and hardware for easy installation. A brake controller should be mounted somewhere on the dash of your vehicle, and CURT recommend putting it below the steering wheel, either on the right or left side of the steering column. This way the control will not block your view when driving, but it will remain accessible and visible when adjustment is needed.

Use this connector to attach your brake controller to the vehicle’s brake wiring harness under the dash. Mount the brake controller under the dash. Connect the four wires to the brake controller: one for power, one for ground, one for the brake signal from the vehicle, and one for the output of the controller to the trailer with butt crimp connectors (not included) Plug the harness into the vehicle harness under the left-hand dashboard, and your trailer brake controller is connected.