| Series | |
|---|---|
| Types | |
| Material | |
| Axles | |
| Harnesses Types |
Each CURT hitch design undergoes stringent testing according to SAE J684 specifications to ensure safety and dependability with every mile.
With a dedicated engineering facility, located in the heart of the automotive industry, each CURT hitch is rigorously tested to SAE J684. This ensures the safety and reliability of each hitch design.
CURT products come with a one-year warranty on components and parts.
CURT hitches are designed, manufactured, finished and tested at its headquarters in Eau Claire, Wisconsin to give you and your crew confidence for the road ahead.
CURT hitches are welded using manual and robotic processes for speed and precision. Every CURT hitch undergoes an industry-leading co-cured finishing process to ensure maximum protection against UV rays, rust, scratches and chipping.
Every CURT hitch undergoes an industry-leading co-cured finishing process to ensure maximum protection against UV rays, rust, scratches and chipping.
Brake Control Wiring Kit (51500) by CURT®. For vehicles without a factory brake control plug. It takes a lot of power to stop a moving trailer, especially when that trailer is hauling livestock, construction materials, industrial equipment or other heavy-duty cargo. Play it safe when you tow and give your trailer brakes the control they need with a CURT trailer brake controller and brake control harness. CURT quick plug brake control harnesses make the installation of your brake controller literally a snap.
They are designed to allow your brake control to plug directly into your vehicle's power system using an original equipment connector. They are equipped with two plugs - one that snaps into your vehicle's original equipment socket and the other that connects to any CURT brake controller, including Venturer, Discovery, Reflex and TriFlex. CURT quick plug harnesses install in less than 10 minutes to get you setup and on your way with time to spare. They include two feet of wire and a slit loom sleeve to keep wires well protected and contained. This brake control adapter harness is compatible with certain years of the Honda Pilot and Honda Ridgeline.
Use this connector to attach your brake controller to the vehicle’s brake wiring harness under the dash. Mount the brake controller under the dash. Connect the four wires to the brake controller: one for power, one for ground, one for the brake signal from the vehicle, and one for the output of the controller to the trailer with butt crimp connectors (not included) Plug the harness into the vehicle harness under the left-hand dashboard, and your trailer brake controller is connected.