Covercraft® - Optional Cable Lock Kit

You use a car cover for good reason - to keep your vehicle protected from the constant onslaught of UV rays, weather, airborne pollutants, and falling debris from trees. While Covercraft covers are fitted to each make and model, they are designed with just the right amount of looseness for optimum moisture release. If you must park your vehicle in open areas or other locations subject to high winds, then you know nothing is worse than having to chase down a car cover that has blown off the vehicle. Chance dictates whether your cover may be unscathed, damaged and run over in the street, snagged in a neighbor’s tree, or laying in a mud puddle. Even if the cover doesn’t blow all the way off your vehicle, any part of it flapping loosely in the wind can damage your vehicle’s paint upon repeated contact. And then there is the increased level of tree sap and twigs that fall from trees during higher wind conditions. Sap is one of the most caustic elements to automotive paint, and twigs always find their way underneath the hood where they can clog ventilation cowls and drainage lines - causing water to back up into your vehicle.

Covercraft’s Lock and Cable Kit for Car Covers keeps your cover properly snugged in place during high winds so it can fully protect your vehicle as it was designed to. And, it prevents unauthorized removal by those looking to steal your cover, break into your vehicle, or commit vandalism. Securing the steel cable is easy - simply loop the cable through one of the pre-fitted grommets found along the mid-point of either side, slide it under the vehicle, then loop it through the hole on the other side. Use the padlock to lock the eye of the cable around itself, and your cover is secured. Covercraft builds all components for the Lock and Cable kit in the United States and backs them with a 1-Year warranty against failure due to manufacturing defects.