Carbon Creations® - M-Speed Style Carbon Fiber Hood

Name: Carbon Creations® - M-Speed Style Carbon Fiber Hood
Brand: Carbon Creations
SKU: mpn4561607170
Price: 1021.50 USD
Availability: InStock
Rating: 3.3 (4 reviews)

4 reviews|Item # mpn4561607170|Similar Products

Carbon Creations® - M-Speed Style Carbon Fiber Hood Carbon Creations® - M-Speed Style Carbon Fiber Hood Carbon Creations® - M-Speed Style Carbon Fiber Hood Carbon Creations® - M-Speed Style Carbon Fiber Hood Carbon Creations® - M-Speed Style Carbon Fiber Hood Carbon Creations® - M-Speed Style Carbon Fiber Hood Carbon Creations® - M-Speed Style Carbon Fiber Hood Carbon Creations® - M-Speed Style Carbon Fiber Hood Carbon Creations Special Offers

Carbon Creations® - FAQ Carbon Creations Authorized Dealer

$1,419.00Save: $397.50 (28%)

$1,021.50

Manufactured - Ships in 7 to 10 days

Vehicle Specific

Please Select Vehicle Below

Notes:

Hood pins are required for proper installation of this product, and are not included with this purchase
Do not use gas struts since they create excessive pressure that can cause serious damage to your hood and their hardware

Authorized Dealer

Have a Question? Ask a Specialist

800.505.3274Live Chat

Vehicle Fitment

Make	Model	Year
Mazda	3	2010-2013

Product Details

M-Speed Style Hood (108683) by Carbon Creations®. Make your vehicle look like a speed monster with this hood. It is manufactured from 2x2 twill weave carbon fiber and finished with a premium gloss coat that is resistant to UV rays. The hood is extremely lightweight while ensuring track-proven durability and strength. Whether you are a racer or just want to look the part, this product is a great choice.

Notes

Hood pins are required for proper installation of this product, and are not included with this purchase
Do not use gas struts since they create excessive pressure that can cause serious damage to your hood and their hardware

Specifications

Material: Carbon fiber

Features

Hand-laid carbon fiber part on top of fiberglass
2x2 twill weave carbon fiber
Premium gloss, UV protectant finish
Track-proven strength and performance
Up to 70% lighter than OEM factory parts
Intended for off-road or show use only

If you want a body kit with the latest high-tech style coupled with functional strength and lightweight, there's no other choice but Carbon Creations by Extreme Dimensions. Every Carbon Creations body kit is designed and engineered for the specific vehicle, to be the most aerodynamic possible. Carbon Creations Carbon Fiber parts are up to 70% lighter than OEM parts, yet they're strong enough to be used under grueling racing conditions. They're designed to be as light as possible without sacrificing durability and your safety. Every Carbon Creations Carbon Fiber part is manufactured to the highest quality standards and undergoes a rigorous inspection process before it leaves the factory.

Carbon Creations® designs and manufactures innovative carbon-fiber aerodynamic products. The company’s product offering includes hoods, hood vents, spoilers, rear wings, bumpers, side skirts, fenders, roofs, and much more. Each product is made specifically for your vehicle with the highest quality standards and inspected by a quality control team before leaving the company’s manufacturing facility. What’s more, all products are crafted from grade “A” carbon fiber and finished with a premium clear coat with UV protection. They look great and are as light as possible but, at the same time, retain durability and ensure safety. They are also very functional and widely used by professional auto, drifting, and drag racers. Over the past number of years, Carbon Creations products have been widely exposed by the media as some of the most prestigious carbon-fiber aerodynamic products in the industry.

Brand:

Carbon Creations

Part Number:

108683

Alternate MPN:

108683

Warranty

All body kits and products sold by Carbon Creations are aftermarket products and are intended for off-road or show use only. The brand is not liable for any damages or injury as a result of the use of its products. Due to the material and processes used in production, products will not be a “direct bolt-on.” Carbon Creations products may need prepping, sanding, shaving, filling gaps, and/or other body work. Modifications may include removal of the reinforcement bars, bumpers, turn signals, and other safety equipment on the vehicle. Carbon Creations highly recommends that a professional “custom” shop with fiberglass body kit experience perform the installation. Auto shops experienced in OEM installations may not be experienced in aftermarket fiberglass installations. All products sold by Carbon Creations are for off-road and show purposes only. Due to strict regulations by the Department of Transportation, some of these products are not approved for street/highway use. The brand does not recommend, and in fact discourages, these parts to be used on public streets and highways.

LIMITED WARRANTY

Carbon Creations warrants its branded products to be free from manufacturing defects in workmanship and materials when used for their intended purposes. This limited warranty shall extend for a period of one (1) year against fading and discoloration on the clear coat finish. This warranty is non-transferable. Any part of a Carbon Creations product that is covered by this warranty and that is found in reasonable judgment to be defective in materials or workmanship will be replaced in full at the request of the customer. For example, Carbon Creations will not replace a complete body kit if a single component is found to be defective. The following situations are not covered by warranty: Any Carbon Creations product that has been subject to misuse, neglect, accident; or that has been improperly installed. Any Carbon Creations product that has been modified or altered from its original manufactured state.

Hood and Trunk Fitment Guarantee

Carbon Creations stands behind the fitment of its products. Once your hood is installed, Carbon Creations will fully replace your hood if it does not fall within the following guidelines of the brand’s Fitment Guarantee. Hood does not clear a stock engine. Gaps between the hood and the fenders are more than 1/2″ wide on each side. Hood levels more than 3/8″ higher or lower than the fenders Latch is too long or too short compared to the stock latch, causing the hood not to latch after adjusting. Carbon Creations does not guarantee fitment on vehicles that have been involved in accidents and/or have had body damages or customization. Hood pins are required.

Trunks

Gaps between the trunk and the rear fenders are more than 1/2″ wide on each side. Trunk levels more than 3/8″ higher or lower than the rear fenders. Carbon Creations does not guarantee fitment on vehicles that have been involved in accidents and/or have had body damages or customization.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(4)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Carbon Creations® - M-Speed Style Carbon Fiber Hood

1-4 of 4 Reviews

Sort by

3 of 5

Nice Hood but Challenging to Install

Carbon Creations® 108683 - M-Speed Style Carbon Fiber Hood

This hood looks fantastic but be prepared to do extensive modifications to get this installed. We had to fabricate the hood latch as this hood has about 1/2 in shorter u bolt on the latch. Additionally the air scoop is not installed and figuring out where the holes need to be drilled was next to impossible. We finally used an angle grinder to cut slots in the hood where the bolts needed to go and got things lined up. Took two guys working about 8 to 9 hours to get it installed.

Posted by Russ (Aurora, CO) / August 21, 20192012 Mazda 3

5 of 5

Mazda 3 2010 (2.0L) [Sedan] Direct Fit!

Carbon Creations® 108683 - M-Speed Style Carbon Fiber Hood

I ordered this hood for my Mazda 3 2010 Sedan and the part fit perfectly with minimal adjustments needed. This hood looks awesome! The weight this hood takes off your car & the air flow it allows made for huge gains in performance! [+] The hood scoop came installed! (Not separately as shown in advertised photos.) After unscrewing the bolts that kept the factory hood on, the carbon fiber hood slid into place. With minimal adjustments for the centering of the part. [-] Holes for the screws do not come drilled, so some prepping is required to actually install the part, and fasten it safely. I would highly recommend ripping the rubber protectors off of your old factory issued hood & drilling out the holes for them to be reattached onto your new carbon fiber hood. Helps balance the hood evenly for flush look, and keeps the hood from clapping against your engine bay.

Posted by Connor (Framingham, MA) / August 21, 20182010 Mazda 3

1 of 5

Wasted Time For Awful Product

Carbon Creations® 108683 - M-Speed Style Carbon Fiber Hood

We are an automotive collision center who ordered this hood at the request of our customer. It's horrible. The striker is at least 1/2 too short and mounted about an inch off center from the latch. No way to close the hood. Hinges off center as well. Original hood fits car perfectly. This one nearly touches one fender and a 1/2 gap at the other. Lots of waves as well. Though the scoop is included with hardware, there are no holes drilled for installation. I actually called the manufacture before ordering and was told a completely different story. Took two weeks to get.

Posted by Heidi (Suwanee, GA) / January 11, 20172010 Mazda 3

4 of 5

Carbon Fiber Hood

Looks cool, fits perfectly.

Posted by Ricardo (Las Vegas, NV) / October 27, 20152012 Mazda 3

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!