Name: BMR Suspension® RH001 - Torque Arm Hardware Kit
Brand: BMR Suspension
SKU: mpn4488538792
Price: 49.95 USD
Availability: InStock
Rating: 4.5 (2 reviews)

Vehicle Fitment

Chevy

Pontiac

Specifications

Finish	Zinc plated
Additional Info	For rear torque arm mount
	Grade 8 hardware for the ultimate in strength
	Designed for street performance, drag race, and road race applications
	1-2 hour installation time

Includes

(2) Bolts, (2) Washers, (2) Nuts

Features

Proudly made in the U.S.A.
Proven to deliver superior durability and quality
Made to push your vehicle to the next level
Manufactured from the finest materials with quality in mind

Product Details

Torque Arm Hardware Kit by BMR Suspension®. Launch harder and add strength to the torque arm on your car with a torque arm hardware kit from BMR Suspension. Factory torque arm hardware can get rusty and nasty over the years, and replacing it when you replace your torque arm is always a good idea. BMR's replacement torque arm hardware kit features Grade 8 hardware for the ultimate in strength. This allows you to put as much power down as possible with out the fear of inferior hardware cause issues. BMR Suspension designed the Torque Arm Hardware Kit to work well in street performance, drag race, and handling applications. The factory torque arm hardware rusts and corrodes over time. Upgrading the hardware is an easy way to ensure failures will be kept to a minimum. When performance is a must, rely on BMR Suspension!

BMR Suspension® - Warranty Made In USA BMR Suspension Authorized Dealer

Brand:

BMR Suspension

Part Number:

RH001

UPC:

887753325259

Warranty

BMR products are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. The obligation under this warranty is limited to product replacement but not the reinstallation of the replacement product or other incidental costs. This warranty does not cover any product that has been subject to misuse, neglect, alteration, accident, or improper installation. Normal wear shall not be considered a defect under this warranty. All warranty adjustments are limited to replacement or credit. This warranty specifically excludes impact damage or damage to powdercoat.

BMR products are designed to be used with OEM products and other BMR products. BMR does not warranty its products for fitment with aftermarket products from other manufacturers. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products.

The purchaser understands and recognizes that racing parts and equipment by BMR are subjected to varied conditions due to the manner in which they are to be installed and used. The acceptability and suitability of any part manufactured by BMR for a particular application is solely the purchaser's decision. BMR makes no warranties whatsoever, expressed, implied or written. There is no warranty of merchantability. The right to make changes in the design or add to or improve on its product without incurring any obligation to install the same on products previously manufactured is expressly reserved.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(2)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

1-2 of 2 Reviews

Sort by

5 of 5

BMR Tunnel Mount TA011 for 4th Gen Camaro

CARiD was good to me. BMR not sure much. I got the TA011 for stock exhaust with a DSL a few chips in the paint. Not bad, but no stickers, wtf. So long story short I got a stock exhaust but if u changed cats or muffers at all it not gonna work. I got Flowmasters 80 series exhaust no cat test pipe 3in to stock 2 3/4 test pipe going back. So all I can say now is to get the no DSL for stock modded exhausts cause i had to cut off the dsl on mine. Plus the TA013 will hit ur drive shaft on a car like mine fronts way lower then the back. Qa1 coilovers in front stock heavy duty springs in rear cause my 315 nt05 were rubbing hard with the 1 1/4. Drop springs so had to run a strock height spring in the rear plus I got the TA cover for rear diff. It hits my stock sway bar so now. I'm waiting on my BMR sway bar, hope it fits too. Plus just install the adjustable panhard rod too and rear control arms, so come on BMR. $$$ on the way. So hit a brotha up with a sponsor plus I race circle track seekonk Rhode island spec drag. Need and gonna still buy everything u got for the 4th gen Camaros too.

BMR Suspension® TA011R - Tunnel Mount Torque Arm

Posted by Samuel (West Warwick, RI) / March 29, 20191994 Chevy Camaro

4 of 5

Be Prepaired to Wait

CARiD has great service but the manufacturing takes about 3 months.

BMR Suspension® TAS009R - Torque Arm Suspension Kit

Posted by Dan (Wainfleet, ON) / March 09, 20191979 Chevy Camaro

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!