Vehicle Fitment

Avanti

Bentley

Buick

Cadillac

Chevy

GMC

Jaguar

Jeep

Oldsmobile

Pontiac

Rolls Royce

Specifications

Brand	B&M®
Series	Nitrous Holeshot™
Material	Steel
Additional Contents	New needle bearings
Anti-Balloon Plate	Yes
Automotive Item Grade	High Performance
Bolt Circle Diameter (in)	10.75
California Proposition 65 Required	No
Crank Pilot Diameter (in)	1.71
Emission Code	5
FlexPlate Bolt Circle	10-3/4", 11-1/2"
Flexplate Change Needed	No
Furnace Brazed	Yes
Grade Type	Performance
Input Spline	30
Lock Up Type	No
Lockup	No
Lockup Type	No
Mounting Studs	No
Spline Quantity	30
Stall	3500-3800
Stall Speed	3,500-3,800
Stall Speed RPM	3500-3800 R3
Torque Converter Series	Nitrous Holeshot
Transmission	TH350
Transmission Model	TH400, TH425, TH375, TH350

Includes

Torque Converter
Mounting Hardware

Features

Furnace Brazed Impeller and Turbine
Anti-balloon Plate for Added Strength
Fully Balanced and Pressure Tested
Steel Alloy Pump Drive Tube
Dual pattern 10.75 and 11.50-inch bolt circle
Higher Stall Speed, Quicker Acceleration
B&M Quality & Durability
Needle Bearing Between Stator and Turbine

Product Details

Nitrous Holeshot™ Torque Converter (20485) by B&M®. Material: Steel. With the addition of anti-balloon plates, the Nitrous HoleShot is the strongest of the B&M street converter line. These converters will take the “instant hit” abuse of plate-type nitrous systems, and are also tough enough to handle the high power and torque of big cubic inch crate engines. All Nitrous HoleShot converters are completely balanced with full furnace brazed impeller and turbine, heavy duty needle type thrust bearings, new turbine hubs and anti-balloon plates, these are serious converters for serious performance street cars. This converter is NOT to be used in trans-brake applications.

The reason for considering B&M torque converters boils down to performance. Higher stall speed is the key. A higher stall converter allows the vehicle to accelerate better from a dead stop and may provide tire-smoking performance. B&M offers a wide range of performance torque converters to fit almost everybody's needs. From the Tork Master, to the Nitrous Holeshot for street applications to the Quick 60 Race converters for racing, B&M has the right converter for your vehicle. All B&M converters are precision engineered, spin balanced and pressure tested.

B&M® - Torque Converter Features Made In USA B&M Authorized Dealer Catalog Warranty About us

Brand:

B&M

Part Number:

20485

UPC:

019695952952

Warranty

Lifetime Limited Warranty applies to all B&M shifters, differential covers and cast aluminum pans.

One-Year Limited Warranty applies to B&M coolers, shifter related accessories (knobs, handles, etc.), torque converters, flexplates, dipsticks, stamped steel pans and other transmission related accessories (except racing products).

90-Day Limited Warranty applies to B&M transmissions, launch control kits and all electrical components (switches, lights, solenoids).

B&M Racing & Performance (“B&M”) extends the following limited warranty to the original purchaser of its shifters, pans, coolers, transmissions, components and accessories (hereafter “products”).

B&M warrants the products mentioned above against defects in materials and workmanship for the period set forth below, when they are owned by the original purchaser and remain installed on the vehicle on which they were originally installed. This warranty is void if the product was not installed properly on the vehicle, was installed on a vehicle for which it was not designed, or was removed from the vehicle on which it was originally installed and reinstalled on another vehicle. This warranty shall not apply to normal wear (bushings, springs, etc.), cosmetic issues such as coatings and material discoloration, or any product that was installed on a racing vehicle (excluding shifters), installed contrary to B&M instructions, or altered, misused, repaired, damaged from an accident, collision, undercarriage road impact or debris, or willful or negligent act.

The warranty set forth herein for all B&M shifters, differential covers and cast aluminum pans extends for a period of the life of the original vehicle the product was installed on. The warranty set forth herein for B&M coolers, shifter related accessories (knobs, handles, etc.), torque converters, flexplates, dipsticks, stamped steel pans and other transmission related accessories (except racing products) extends for a period of one year from the date of original purchase and the original vehicle it was installed on. The warranty set forth herein for B&M transmissions, launch control kits and all electrical components (switches, lights, solenoids) extends for a period of 90 days from the date of original purchase and the original vehicle it was installed on.

B&M’s liability is expressly limited to the replacement of the product or refund of the purchase price as described herein. B&M shall have no liability for the cost of installation or removal of the defective product, the cost of labor or any additional parts required to complete the installation of the replacement product. In no event shall B&M be liable for any direct, indirect, special, incidental and/or consequential losses or damages, including but not limited to interruption of business or loss of business or loss of profit or damage to related components resulting from the use of or inability to use the product, or any breach of warranty or any defect in the product, even if B&M shall have been advised of the possibility of such potential losses or damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights. You may also have other rights which may vary from state to state.

The warranties set forth herein are exclusive and unless otherwise required by applicable law, no other warranties are made by B&M or are authorized to be made with respect to the product.

Magnuson-Moss Warranty Act:

Legally, a vehicle manufacturer cannot void the warranty on a vehicle due to an aftermarket part unless they can prove that the aftermarket part caused or contributed to the failure in the vehicle (per the Magnuson Moss Warranty Act (15 U.S.C. 2302(C)) Learn More

Reviews

(0)

Only authorized customers can leave a review on our website. We would love to know what you like or dislike about the product. Share your opinion on product quality, appearance, installation, and other characteristics.

Questions and Answers

(0)

If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

B&M® 20485 - Nitrous Holeshot™ Torque Converter