Baer® 4302421B - Extreme Plus Drilled and Slotted Rear Brake System

Benefits:

• Drilled holes and Slots create an escape route for debris, dust, gases, and water
• Slots help to increase pad bite and improve air circulation
• Slots clean and de-glaze pad surface for optimum pad coefficient of friction
• Drilled rotors improve the appearance of your wheels and provide reduced rotor weight
• 2-Piece rotors offer great weight savings and provide rapid heat dissipation compared to 1-piece rotors
• Vented type of rotors offer much faster heat dissipation
• Multi-piston calipers provide clamping force on both sides of the rotor at the same time and uniformly transfer braking force to the brake pads
• Caliper pistons are hollow to save weight
• Aluminum caliper body allows for exceptional light weight (up to 40% of weight savings) and ensures superior corrosion resistance
• Caliper heat-resistant coating prevent cracking and fading

Baer brakes offers a solution to the woes of underperforming factory brake parts with the Extreme Plus Rear Brake System. Designed as an upgrade for the highest performing street vehicles, this kit starts with an unheard of 6-piston rear caliper set. It includes 2-piece rotors that are cross-drilled and grooved for superior disbursement of heat, brake friction gases, dust, and water. Center sections are crafted from aluminum for weight reduction, and kits for vehicles with C-clip style rear axles come with a specially designed Verislide self-centering brake caliper bracket that mounts to the axle spindle. These rear rotors include drum brake style parking brake components that engage inside the inner edge of the rotor top hat section. Should you prefer your rear brake kit without emergency brake assemblies, a version that does not include them is also available.

While the Extreme Plus calipers are more powerful than products from most competitors, company engineers design and test them until they achieve the perfect balance of performance and control. This means using superior materials and designs thoroughly in all areas of construction, not saving pennies where the eye will not notice. For example, calipers are radially mounted to maintain greater stiffness under load - ensuring pads stay in alignment with the rotor and make a more even, superior level of contact. Calipers also feature stainless steel pistons, caliper attachment brackets, and vibration dampening springs to ensure freedom from corrosion deterioration. Pistons within each caliper are staggered in size to minimize pad taper and uneven pad wear, so you'll get more usable brake life out of pads. Caliper housings feature a durable powder coat finish that is extremely heat resistant, and the ceramic brake pads also feature racing-grade backing plates that more effectively prevent heat buildup.

Baer matches the level of racing-grade calipers and rotors with ceramic brake pads that come pre-loaded inside each caliper. Used in championship racing where 200 mile-per-hour speeds quickly generate blistering heat, ceramic brake pads offer the natural ability to stay cool under the most severe conditions. When ceramic brake pads are combined with perforated rotors, heat buildup is reduced so extensively that brake fade rarely occurs due to fluid reaching boiling temperature. Ceramic brake pads are far quieter due to their higher resonant frequency undetectable by human ears, so squealing is not an issue. And finally, ceramic compounds last longer and produce finer, less obtrusive dust that does not stick to most wheel surfaces. You don't need a high-performance vehicle to enjoy the benefits these brake kits offer, and you might find your new car dealer charging a similar price for OE brakes while giving you less. We invite you to contact our knowledgeable specialists seven days a week for help with any questions you have on Baer brake kits at 800-505-3274.