2015 Jeep Wrangler Off-Road Bumpers

I have owned this bumper for two years. It gets light duty and has performed well under those conditions. However, today I decided to use the 2" receiver to pull a small trailer (1875 lbs with a tongue wait less than 180lbs). I inserted my ball mount and the hitch pin holes don't line up! What DV8 forgets to tell you is that while the bumper fits the JK fine, it makes it impossible to use any hitch mount unless it is custom made. The problem is the standard distance from the back end (Jeep side, not trailer side) of any ball mount to the center of the hitch pin hole is a standard 2.5" for all ball mount makers. But this bumper has a receiver that is too shallow making it only 2" from the end of the hitch mount to the center of the hitch pin hole rather than the standard 2.5". That means all off-the-shelf ball mounts are unusable because the hitch point holes in the receiver and the hitch pin hole in the ball mount don't line up! The bumper is fine as long as you never want to tow anything.