2012 Jeep Wrangler Custom Headlights

1) No installation instructions included with these two pairs of headlight. For $300.00 per pair, seems installation instruction could have been included. Had to print out a PDF off CARID's website. 2) Product claims to be Plug-n-Play, yet the H13 bulb connectors provided would not lock into the factory connectors. The only way I could make these work was to shave ~1.0mm off the vertical side of the triangular locking tab in order to get them to snap in and lock. 3) The headlamps themselves have three tabs molded into the aluminum housing that are designed to correspond with the three recesses located within the factory bezel. Unfortunately the headlamp housing's tabs are molded at just slightly larger in diameter across the width of the housing than the factory bezel receivers resulting in the housing not fully seating properly within the factory bezel. The only way I could correct this issue was to file ~0.5mm off all three aluminum tabs on each housing, then it fit perfectly! this was not just unique to my 2012 JKU. I also installed these same headlamps on my 2015 JKU with the exact same issues as noted above. As for general product quality and performance, I'm quite happy with the outcome. Just be aware you may experience a few hiccups during the installation process, but nothing insurmountable if you just use common sense!