Product Details
Lamborghini Gallardo with Cast Iron Rotors 2011, Stage 26 Slotted Front Brake Kit by EBC®. EBC Racing™'s fully-floating 2-piece brake discs combined with performance brake pads represent the ultimate braking upgrade for high powered vehicles driven fast on road or participating in the occasional trackday.
Specifications
| Driving Style: Performance / Racing |
| FMSI Cross Reference: D1029 |
| Outside Diameter: 365mm (14.4") |
| Rotor Construction: 2-Piece |
| Rotor Material: Cast Iron |
| Rotor Style: Slotted |
| Width Pad A: 85mm (3.35") |
| Height Pad A: 75mm (2.95") |
| Thickness Pad A: 14mm (0.55") |
Includes
- Rotors: SG2F010 (2 per Pack)
- Pads: DP41513R (4 per Pack)
Features
- Angled slots on rotor surfaces allow superior expulsion of heat, water, brake dust, and friction gases
- Round indents in the rotors surface further increase cooling without the risk of cracking that drill-through holes pose
- Brake rotors are unidirectional to the left and right side of your vehicle to maximize effectiveness
- The bells are precision machined from aerospace grade aluminum
- All bobbins are machined from a single piece of stainless steel
- Designed to provide an optimum combination for street use
- Unique composition allows high braking friction when brakes are cold
- Features a cold friction rating of 0.5
- Backing plate and side edges of brake pad are yellow powder coated for resistance to corrosion
- Pad surfaces have chamfered edges to reduce contact against rotor lip that forms over time and causes squealing
- Center gap allows for proper heat expansion of brake pads
- Built-in noise-reducing shims
- Provides equivalent performance to GG-rated brake pads
- Patented Brake-In™ red pad surface coating provides better grip during the first 100 miles after new pads are installed
- Patented Brake-In™ red pad surface coating scours off any existing glaze or heat spots from brake rotor surface for more even surface mating
- Sold as a set for two wheels
EBC Racing's 2-piece fully-floating brake discs are engineered from the finest materials without compromise, resulting in one of the highest quality 2-piece brake discs available in today's marketplace. These discs are equally at home on the road or at the race track.
Outer friction rings are cast from high-carbon G3500 disc alloy, giving excellent wear properties and crack resistance even after heavy on-track use. EBC's patented stainless steel SD-Drive bobbins allow the braking ring to float freely and independently of the centre bell, reducing stresses and eliminating the chance of warping, whilst each bobbin location features an anti-rattle clip for totally silent operation. All discs feature 48 curved vanes and are handed to each side of the car allowing effective heat dissipation.
EBC Racing's 2-piece discs often offer a weight saving over OEM parts, helping to reduce rotational un-sprung mass that has a positive effect on driving dynamics. Additionally, when the disc eventually becomes worn, the hub can be retained replacing only the outer friction ring which reduces long term operating costs.
EBC Yellowstuff™ 1793 compound is a true winner all round, it has high friction from cold, not requiring warm up for street use yet when loaded up and really hot the brakes just get better. Even up to truck weights these pads grip and do not heat fade. They are the most fastest brake pads for Trackday and Drift racing. EBC yellows are ECE Brake safety tested which means they must work perfectly from cold at least as good or better than stock pads. When Yellowstuff™ see some heat (which is not tested for in the ECE R 90 brake safety regulations) they really show their pedigree. On Japanese cars built with lower friction FF rated pads these deliver a full grade higher stopping and on German cars built with GG these are about the only aftermarket pads that will match or beat the pretty good German OE spec pads and that takes some doing.
Founded and based in the United Kingdom, EBC Brakes® is a premiere producer of brake components for passenger cars, trucks, buses, motorcycles, ATVs, and even scooters. EBC brake pads and rotors are preferred by fleet operators of emergency vehicles, livery cabs, and by discerning racers all over the world for the effective grip, superior lifespan, resistance to heat buildup, and proper fit they deliver. From the company president down to every employee, EBC strongly believes that brake components that are truly superior must be constructed from the most effective materials and also offer the lowest environmental impact possible. Likewise, EBC will never put their name on any products that cut corners in development, quality control, or are manufactured using sweatshop working conditions where human rights are not valued. When you want the best, most responsible brake components that meet or exceed OEM specification without dealer OEM markup, EBC Brakes is the only name you need to know.